× You are using an outdated browser. Please upgrade your browser to improve your experience.
We Ship Worldwide! | FREE SHIPPING! for US Continental orders over $99. Click for details.
Shopping Cart
Your cart is currently empty..
FREE SHIPPING! for US Continental orders over $99 click for details
NavPod Marine Electronics Housing & Pods
Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, quality workmanship and attractive design make the best built instrument housing ever available to the marine industry. Features of all Navpods include the watertight silicone seal, tamperproof fasteners for security and convenience, concealed wiring, and clean installation for easy access.
Navpods offer quality marine pods and multi-function display holders. These are designed for boaters looking for a top-notch experience in sailboat and powerboat electronics usage.
What type of NavPod Electronics Housing & Pods are you looking for? The MAURIPRO Sailing store provides a large selection of Electronics Housing & Pods. You can choose between AngleGuard, InstrumentPod, MastPod, Mounts, Pedestal Guard, Black PedestalPod, Plates, PowerPod, SailPod, SpeakerPod, StraightGuard, Stanchion Kit, SystemPod, Un-Cut Pod and Wrench Set.
MAURIPRO Sailing, your direct access to NavPod Marine Electronics Housing & Pods and all your other sailing and boating needs.
Copyright © 2024 MAURIPRO Sailing LLC.
NavPod for Sailing
Navpod by product category.
AngleGuard - 9.5" wide
AngleGuards are for mounting SailPods, SystemPods or InstrumentPods at the helm.
AngleGuard - 12" wide
SailPods are designed for mounting a single Radar Chartplotter or MFD display at the helm.
SystemPods are designed for mounting multiple pieces of electronics into a single NavPod. We recommend the use of a Single Bend AngleGuard.
InstrumentPod
InstrumentPods are for mounting 3 or 4 instruments in a single NavPod. We recommend a StraightGuard for mounting an InstrumentPod by itself, or a Double Bend AngleGuard for mounting an InstrumentPod above a SailPod.
MastPods are designed for mounting up to three Maxi size displays on the mast. This is a great installation for seeing performance sailing instruments from anywhere in the cockpit. The included flexible mounting bracket is adaptable to almost any size mast.
SuperSailPod
SuperSailPods are for mounting an 8” or 9” chartplotter and four instruments into one NavPod on a 12" wide pedestal guard.
PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20° viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base. PowerPods are available in two color options: high gloss white (all models) and black carbon print (PP4400, PP4500, PP4600, PP4800, PP4900, PP5050, PP5100, PP5200, and PP5920 Series only). Constructed out of durable acrylic-capped ABS like all Gen3 NavPods, both color options have the same high gloss finish with UV stability.
RailMount NavPod
RailMounts are comprised of a NavPod that rotates on a Stainless Steel arm designed for mounting on the side of a pedestal guard. RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1″, 1.125″, or 1.25″ diameter tube. A Stainless Steel arm is used to mount the NavPod housing. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm (available space is 0.75″ inside the narrowest part of the arm, so keep this in mind for planning your cable run; most transducer cables will not fit through the arm), and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard. RailMounts are designed for all popular standard size instruments, as well as 7 and 9 inch chartplotters.
StraightGuard - 9.5" Wide
9.5" Wide StraightGuards are for mounting InstrumentPods or small SystemPods like the GP1300, GP1400, GP1500 or GP1600 Series.
StraightGuard - 12" Wide
12" Wide StraightGuards are for mounting InstrumentPods or small SystemPods like the GP2300, GP2400, GP2500 or GP2600 Series.
Stanchion Kit
Stanchion Kits are a very strong, sturdy and secure way to mount electronics on the dash or in the overhead area. All Stanchion Kits include two mirror polished 316 grade stainless steel tubes with 1.25" outer diameter and 0.065" wall thickness. Kits also include stainless steel feet and mounting hardware. The stanchion tubes are pre-drilled for easy installation of a compatible NavPod. Wires can be routed down both tubes and are all concealed for a very clean installation. First, find the right SailPod or SystemPod for your electronics, then choose the corresponding Stanchion Kit. Some Stanchion Kits are designed specifically for dash mounting (SK11, SK135) and some are designed specifically for overhead mounting (SK125, SK129, SK130). Each Stanchion Kit is designed to fit a specific range of NavPod sizes.
Accessories & more
Introducing a range of accessories and mounts tailored for marine enthusiasts, the "Accessories and More" lineup offers a variety of solutions to enhance boating experiences. The Tamperproof Wrench Kit provides replacement wrenches when the original wrench for an existing NavPod has been misplaced. For optimal viewing while fishing, PedestalPod 45° models elevate displays 20" off the deck at a convenient 45° angle near the bow. MastPods enable the installation of multiple Maxi size displays on the mast, facilitating clear viewing of sailing instruments from any point in the cockpit. The PedestalMount is designed to combine with the stock trunnion bracket for most 10-16" chartplotters, MFDs and fishfinders to raise the display off the deck and provide tilt and swivel adjustability for easy operation and viewing, while also allowing the display to be removed when not in use (as opposed to the permanent installation design of NavPod housings). Renowned for their sturdiness and security, PedestalPods offer an elegant alternative to bracket mounting, safeguarding fishfinders/chartplotters even in the harshest boating conditions. SpeakerPods provide seamless surface mounting for Bose 151 speakers beneath sternrail seats.
Pedestal Guards, Top Plates and Stanchion Kits
StraightGuards (no bend) and AngleGuards (single or double bend) are used to mount one or more NavPods at the helm. These pedestal guard products are available in both 9.5" and 12" widths (measured from the center of one tube to the center of the other tube). Top Plates are installed at the pedestal beneath the compass, and provide midpoint support for the pedestal guard tubing. These products can be used to convert an existing pedestal to 9.5" or 12" width, and/or to increase pedestal guard tubing diameter to 1.25" from a smaller size. Stanchion Kits can be used to mount a SailPod, SystemPod, or InstrumentPod on a flat surface like a dashboard or tabletop.
Top Plates are the upper support bracket for 1.25” diameter AngleGuards.
Tamperproof Wrench Kit
Tamperproof Wrench Set fits all NavPod generations and includes a set of three wrenches.
NavPod by Marine Electronic Manufacturer
- Custom Mounts
- Dealer Finder
- Give us a call! 800-655-7922 or 509-795-0977
Your Cart is Empty
- $0.00 Subtotal
- Modular Radar Mounts
- Modular Dual Mounts
- Modular Top Plates
- Seaview Modular Mount Accessories
- Radar Wedges & Adapter Plates
- Mast Mounts
- Tapered Masts
- Stainless Steel Mounts
- Cable Seals
- Modular Mount Accessories
- Adapter Plates
- Modular Satellite TV & Communication Mounts
- Low Profile Adapters
- Aft Leaning Mounts
- Vertical Mounts
- Top Down Risers
- Search Light Rail Mount
- Accessory Pods
- STANDARD VERTICAL CABLE ENTRY
- RETROFIT VERTICAL CABLE ENTRY
- HORIZONTAL CABLE ENTRY
- Starlink Gen 2 S.S. Adapter
- Starlink Gen 2 S.S. Adapter & Fixed Base
- Starlink Gen 2 S.S. Adapter & Ratchet Base
- Starlink Gen 2 S.S. Adapter for 24" domes
- Starlink Gen 3 Antenna Mount
- Starlink Gen 3 Direct Surface Mount
- Starlink Flat HP & Gen 3 Pole Kits
- Starlink Flat HP Pedestal Mounts
- Starlink Flat HP Mast Mount
- Starlink Flat HP Mobile Case
- Starlink Flat HP Angled Wedge Base
- Starlink Flat HP Angled Wedge Base + LED
- Fixed Light Posts
- inteliPlug Pro Series
- Vault Transom Series
- Vault Center Series
Gen 3 Starlink
Starlink Flat HP
Starlink Gen 2
- Starlink Gen 3 Pedestal Mounts
- Starlink Flat HP Angled Wedge Base + LED Light
- Starlink Gen 2 Adapter
- Starlink Gen 2 Adapter & Fixed Base
- Starlink Gen 2 Adapter & Ratchet Base
- Starlink Gen 2 Adapter for 24" domes
- Starlink Gen 2 Modular Top Plate
- --> 90° CABLE SEALS - HORIZONTAL CABLE ENTRY STANDARD CABLE SEALS - VERTICAL CABLE ENTRY RETROFIT CABLE SEALS - VERTICAL CABLE ENTRY