No products in the cart.

Sailing Ellidah is supported by our readers. Buying through our links may earn us an affiliate commission at no extra cost to you.

The Standing Rigging On A Sailboat Explained

The standing rigging on a sailboat is a system of stainless steel wires that holds the mast upright and supports the spars.

In this guide, I’ll explain the basics of a sailboat’s hardware and rigging, how it works, and why it is a fundamental and vital part of the vessel. We’ll look at the different parts of the rig, where they are located, and their function.

We will also peek at a couple of different types of rigs and their variations to determine their differences. In the end, I will explain some additional terms and answer some practical questions I often get asked.

But first off, it is essential to understand what standing rigging is and its purpose on a sailboat.

The purpose of the standing rigging

Like I said in the beginning, the standing rigging on a sailboat is a system of stainless steel wires that holds the mast upright and supports the spars. When sailing, the rig helps transfer wind forces from the sails to the boat’s structure. This is critical for maintaining the stability and performance of the vessel.

The rig can also consist of other materials, such as synthetic lines or steel rods, yet its purpose is the same. But more on that later.

Since the rig supports the mast, you’ll need to ensure that it is always in appropriate condition before taking your boat out to sea. Let me give you an example from a recent experience.

Dismasting horrors

I had a company inspect the entire rig on my sailboat while preparing for an Atlantic crossing. The rigger didn’t find any issues, but I decided to replace the rig anyway because of its unknown age. I wanted to do the job myself so I could learn how it is done correctly.

Not long after, we left Gibraltar and sailed through rough weather for eight days before arriving in Las Palmas. We were safe and sound and didn’t experience any issues. Unfortunately, several other boats arriving before us had suffered rig failures. They lost their masts and sails—a sorrowful sight but also a reminder of how vital the rigging is on a sailboat.

The most common types of rigging on a sailboat

The most commonly used rig type on modern sailing boats is the fore-and-aft Bermuda Sloop rig with one mast and just one headsail. Closely follows the Cutter rig and the Ketch rig. They all have a relatively simple rigging layout. Still, there are several variations and differences in how they are set up.

A sloop has a single mast, and the Ketch has one main mast and an additional shorter mizzen mast further aft. A Cutter rig is similar to the Bermuda Sloop with an additional cutter forestay, allowing it to fly two overlapping headsails.

You can learn more about the differences and the different types of sails they use in this guide. For now, we’ll focus on the Bermuda rig.

The difference between standing rigging and running rigging

Sometimes things can get confusing as some of our nautical terms are used for multiple items depending on the context. Let me clarify just briefly:

The  rig  or  rigging  on a sailboat is a common term for two parts:

  • The  standing rigging  consists of wires supporting the mast on a sailboat and reinforcing the spars from the force of the sails when sailing.
  • The  running rigging  consists of the halyards, sheets, and lines we use to hoist, lower, operate, and control the sails on a sailboat.

Check out my guide on running rigging here !

The difference between a fractional and a masthead rig

A Bermuda rig is split into two groups. The  Masthead  rig and the  Fractional  rig.

The  Masthead  rig has a forestay running from the bow to the top of the mast, and the spreaders point 90 degrees to the sides. A boat with a masthead rig typically carries a bigger overlapping headsail ( Genoa)  and a smaller mainsail. Very typical on the Sloop, Ketch, and Cutter rigs.

A  Fractional  rig has forestays running from the bow to 1/4 – 1/8 from the top of the mast, and the spreaders are swept backward. A boat with a fractional rig also has the mast farther forward than a masthead rig, a bigger mainsail, and a smaller headsail, usually a Jib. Very typical on more performance-oriented sailboats.

There are exceptions in regards to the type of headsail, though. Many performance cruisers use a Genoa instead of a Jib , making the difference smaller.

Some people also fit an inner forestay, or a babystay, to allow flying a smaller staysail.

Explaining the parts and hardware of the standing rigging

The rigging on a sailing vessel relies on stays and shrouds in addition to many hardware parts to secure the mast properly. And we also have nautical terms for each of them. Since a system relies on every aspect of it to be in equally good condition, we want to familiarize ourselves with each part and understand its function.

Forestay and Backstay

The  forestay  is a wire that runs from the bow to the top of the mast. Some boats, like the Cutter rig, can have several additional inner forestays in different configurations.

The  backstay  is the wire that runs from the back of the boat to the top of the mast. Backstays have a tensioner, often hydraulic, to increase the tension when sailing upwind. Some rigs, like the Cutter, have running backstays and sometimes checkstays or runners, to support the rig.

The primary purpose of the forestay and backstay is to prevent the mast from moving fore and aft. The tensioner on the backstay also allows us to trim and tune the rig to get a better shape of the sails.

The shrouds are the wires or lines used on modern sailboats and yachts to support the mast from sideways motion.

There are usually four shrouds on each side of the vessel. They are connected to the side of the mast and run down to turnbuckles attached through toggles to the chainplates bolted on the deck.

  • Cap shrouds run from the top of the mast to the deck, passing through the tips of the upper spreaders.
  • Intermediate shrouds  run from the lower part of the mast to the deck, passing through the lower set of spreaders.
  • Lower shrouds  are connected to the mast under the first spreader and run down to the deck – one fore and one aft on each side of the boat.

This configuration is called continuous rigging. We won’t go into the discontinuous rigging used on bigger boats in this guide, but if you are interested, you can read more about it here .

Shroud materials

Shrouds are usually made of 1 x 19 stainless steel wire. These wires are strong and relatively easy to install but are prone to stretch and corrosion to a certain degree. Another option is using stainless steel rods.

Rod rigging

Rod rigging has a stretch coefficient lower than wire but is more expensive and can be intricate to install. Alternatively, synthetic rigging is becoming more popular as it weighs less than wire and rods.

Synthetic rigging

Fibers like Dyneema and other aramids are lightweight and provide ultra-high tensile strength. However, they are expensive and much more vulnerable to chafing and UV damage than other options. In my opinion, they are best suited for racing and regatta-oriented sailboats.

Wire rigging

I recommend sticking to the classic 316-graded stainless steel wire rigging for cruising sailboats. It is also the most reasonable of the options. If you find yourself in trouble far from home, you are more likely to find replacement wire than another complex rigging type.

Relevant terms on sailboat rigging and hardware

The spreaders are the fins or wings that space the shrouds away from the mast. Most sailboats have at least one set, but some also have two or three. Once a vessel has more than three pairs of spreaders, we are probably talking about a big sailing yacht.

A turnbuckle is the fitting that connects the shrouds to the toggle and chainplate on the deck. These are adjustable, allowing you to tension the rig.

A chainplate is a metal plate bolted to a strong point on the deck or side of the hull. It is usually reinforced with a backing plate underneath to withstand the tension from the shrouds.

The term mast head should be distinct from the term masthead rigging. Out of context, the mast head is the top of the mast.

A toggle is a hardware fitting to connect the turnbuckles on the shrouds and the chainplate.

How tight should the standing rigging be?

It is essential to periodically check the tension of the standing rigging and make adjustments to ensure it is appropriately set. If the rig is too loose, it allows the mast to sway excessively, making the boat perform poorly.

You also risk applying a snatch load during a tack or a gybe which can damage the rig. On the other hand, if the standing rigging is too tight, it can strain the rig and the hull and lead to structural failure.

The standing rigging should be tightened enough to prevent the mast from bending sideways under any point of sail. If you can move the mast by pulling the cap shrouds by hand, the rigging is too loose and should be tensioned. Once the cap shrouds are tightened, follow up with the intermediates and finish with the lower shrouds. It is critical to tension the rig evenly on both sides.

The next you want to do is to take the boat out for a trip. Ensure that the mast isn’t bending over to the leeward side when you are sailing. A little movement in the leeward shrouds is normal, but they shouldn’t swing around. If the mast bends to the leeward side under load, the windward shrouds need to be tightened. Check the shrouds while sailing on both starboard and port tack.

Once the mast is in a column at any point of sail, your rigging should be tight and ready for action.

If you feel uncomfortable adjusting your rig, get a professional rigger to inspect and reset it.

How often should the standing rigging be replaced on a sailboat?

I asked the rigger who produced my new rig for Ellidah about how long I could expect my new rig to last, and he replied with the following:

The standing rigging should be replaced after 10 – 15 years, depending on how hard and often the boat has sailed. If it is well maintained and the vessel has sailed conservatively, it will probably last more than 20 years. However, corrosion or cracked strands indicate that the rig or parts are due for replacement regardless of age.

If you plan on doing extended offshore sailing and don’t know the age of your rig, I recommend replacing it even if it looks fine. This can be done without removing the mast from the boat while it is still in the water.

How much does it cost to replace the standing rigging?

The cost of replacing the standing rigging will vary greatly depending on the size of your boat and the location you get the job done. For my 41 feet sloop, I did most of the installation myself and paid approximately $4700 for the entire rig replacement.

Can Dyneema be used for standing rigging?

Dyneema is a durable synthetic fiber that can be used for standing rigging. Its low weight, and high tensile strength makes it especially popular amongst racers. Many cruisers also carry Dyneema onboard as spare parts for failing rigging.

How long does dyneema standing rigging last?

Dyneema rigging can outlast wire rigging if it doesn’t chafe on anything sharp. There are reports of Dyneema rigging lasting as long as 15 years, but manufacturers like Colligo claim their PVC shrink-wrapped lines should last 8 to 10 years. You can read more here .

Final words

Congratulations! By now, you should have a much better understanding of standing rigging on a sailboat. We’ve covered its purpose and its importance for performance and safety. While many types of rigs and variations exist, the hardware and concepts are often similar. Now it’s time to put your newfound knowledge into practice and set sail!

Or, if you’re not ready just yet, I recommend heading over to my following guide to learn more about running rigging on a sailboat.

Sharing is caring!

Skipper, Electrician and ROV Pilot

Robin is the founder and owner of Sailing Ellidah and has been living on his sailboat since 2019. He is currently on a journey to sail around the world and is passionate about writing his story and helpful content to inspire others who share his interest in sailing.

Very well written. Common sense layout with just enough photos and sketches. I enjoyed reading this article.

Thank you for the kind words.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

  • My Wish List
  • Compare Products
  • Create an Account

INTRODUCING RONSTAN ORBIT WINCHES™

sailboat mast rigging hardware

  • Remove This Item

Need some advice?

sailboat mast rigging hardware

Official Sponsors of the Australian Sailing Team

sailboat mast rigging hardware

DWYER MAST & RIGGING

The Aluminum Mast C ompany

About Dwyer Mast & Rigging

Dwyer Mast & Rigging, formerly known as Dwyer Aluminum Mast Company, was formed in 1963 to provide high-quality sailboat masts, booms, hardware, and rigging. Our formula for growth is simple - we never compromise with quality. By taking advantage of improved manufacturing methods and an ever-increasing volume, we have been able to maintain competitive prices and continue to provide much needed product to sailors, riggers, and boat builders. 

A team of experience craftsmen and machinists produce spars, fittings, and rigging in Bristol, Rhode Island, sharing a 20,000 sq ft state of the art warehouse and manufacturing facility with Zim Sailing. Dwyer Mast & Rigging is a primary supplier for Zim and Hobie Cat sailboats and OEM supplier for various builders across the country. 

Dwyer Mast & Rigging is part of the Starting Line Sailing portfolio of companies, which also includes Hobie Cat Sailboats (worldwide builder/distributor), Zim Sailing (builder/distributor/retailer) and West Coast Sailing (retailer). Together these companies manufacture, distribute and retail sailboats, sails, parts, apparel and accessories for sailboats under 25’. With 60+ employees across multiple locations, Starting Line Sailing is focused on helping to grow the sport of sailing for everyone.

dwyer-1.5x3.jpg

Our Facility

Pricing & Terms

sailboat mast rigging hardware

standing rigging

  • rope and line
  • cams, cleats and clutches
  • head sail gear
  • roller furling
  • main sail control
  • mast hardware
  • eye straps and pad eyes
  • fairleads and bulls eyes
  • anchor and docking
  • miscellaneous hardware
  • Alexander Roberts
  • My Wishlist

standing rigging

  • Customer Service
  • Order Tracking
  • Your Account
  • Store Policies & Info
  • Privacy Policy
  • Helpful Links
  • Payment Methods

Shopping Cart: 0 Items

eastward ho sailboat for sale

MarineSource.com

  • Boats for Sale

24' eastward ho cruisers.

24' Eastward Ho

ARCHIVED: This is a previously listed vessel and is no longer offered for sale If you would like assistance locating a similar vessel, Click Here to locate a similar boat

Designed by Eldredge-McInnis and built by Portsmouth Yacht Co., the Eastward Ho is a compact yet roomy sloop designed for family cruising in comfort. She is a proven design which combines traditional elegance with practical accommodations. Nothing has been overlooked to satisfy both the sailor and the cruising enthusiast. Her generous headroom, two berths, full galley, and enclosed head are unique on a boat of this size. Her spacious cockpit affords seats long enough for an afternoon nap or additional overnight guests. Sailing or under power she is lively and responsive with a motion reminiscent of a much larger boat. Her ample beam and sufficient ballast make her very stiff without sacrificing valuable draft.

Attabuoy  is in need of general cleaning inside and out and some cosmetic work. The keel will need some minor fiberglass work. The sails are like new. The engine turns over, but has not been operated for a number of years. Take a look and you will fall in love!

  • Specifications
  • Description

Hull color - white

Deck color - cream

Keel - internal lead

Cockpit Cushions

Stern Ladder

Opening Ports - 2

Pressure Water

Refrigerator

Battery - 1 (most likely is dead)

Shorepower 110V

Roller Furling

Depthsounder

Cradle - steel

Anchors - 3

Anchor Rode - 2

Fire Extinguisher

Life Jackets

Main - white, Dacron, The Yacht Sailmakers

Main Cover - blue, Sunbrella

Genoa - white, Dacron, The Yacht Sailmakers

Summer & Winter - Torresen Marine, Inc., Muskegon, Michigan

For more information or details, please contact Steve Dake, Director of Sailboat Sales, at (231) 759-8596 or by email at [email protected] .

Steve has been in the marine business for over 40 years. Please use his knowledge and experience to help you find the right boat for your needs.

Because we value your time, please call and make an appointment prior to visiting. Your scheduled appointment helps ensure the ability to board and see the boat you would like to preview. Please wear boat shoes only to board all boats. The only exceptions are non-marking treads. Thank you!

Connecting with Marinesource.com

facebook

Copyright 1992-2024 MarineSource Network, Inc. All Rights Reserved.

Eastward HO 24, 1977 sailboat

I want to get mails about Recently added "eastward ho 24" ads.

I agree with the Terms of use and Terms of Privacy .

Publication date

  • Last 15 Days
  • Most popular
  • Most recent added
  • Lower price

Price (min)

  • 100.000 USD
  • 125.000 USD
  • 150.000 USD
  • 175.000 USD
  • 200.000 USD
  • 225.000 USD
  • 250.000 USD
  • 275.000 USD
  • 300.000 USD
  • 350.000 USD
  • 400.000 USD
  • 450.000 USD
  • 500.000 USD
  • 600.000 USD
  • 700.000 USD
  • 800.000 USD
  • 900.000 USD
  • 1.000.000 USD
  • 1.100.000 USD
  • 1.300.000 USD
  • 1.500.000 USD
  • 1.700.000 USD
  • 2.000.000 USD
  • 2.500.000 USD

Price (max)

Hull Material

Length (min)

Length (max)

eastward ho 24 for sale

  • eastward ho 24

1976 CE Ryder Eastward Ho 24 sailboat for sale in Connecticut

1976 CE Ryder Eastward Ho 24 sailboat for sale in Connecticut

Ce ryder eastward ho 24.

Built by CE Ryder (USA) and finished by Portsmouth Yacht Co., Rhode Island, USA, this stout pocket cruiser is a solid full-keel sailing vessel. Omoo has had a lot...

Other classifieds according to your search criteria

1976 CE Ryder Eastward Ho 24 sailboat for sale in Connecticut

Haynie 24 HO 2014

Haynie 24ho.

1978 CE Ryder Portsmouth Yacht Co Eastward Ho sailboat for sale in Florida

1978 CE Ryder Portsmouth Yacht Co Eastward Ho sailboat for sale in Florida

Airyella is a classic New England style sloop - has incredible character, is very distinctive, and is a pleasure to sail. She is perfect for anyone looking for a...

2014 Haynie 24 HO | 25ft

2014 Haynie 24 HO | 25ft

Haynie 24 ho.

2014 Haynie 24 HO 2014 Haynie 24 High Output, Yamaha 300 w/215hrs, Jackplate, trim tabs, underwater lights, Minn Kota I-pilot 112lbs 36v trolling motor, Power...

Yamaha SX240 HO

Yamaha SX240 HO

Yamaha sx240 ho.

Sales Department phone 2012 Yamaha SX240 HO 1 of 111 View Large Images Description Stock #075952 - If you are in the market for a jet, look no further...

Yamaha SX240 HO

Marine Connection Boat Sales 1.phone West Palm Beach, FL 2011 Yamaha SX240 HO 2011 Yamaha SX240 HO Jet Boat Combines Performance & Family Friendly Fun!! $34,900...

Yamaha SX240 HO

Marine Connection Boat Sales 1.phone West Palm Beach, FL 2011 Yamaha SX240 HO NICE! 2011 Yamaha SX240 HO Jet Boat, Twin 180HP Engines, Financing! $34,900 ConditionUsed...

Yamaha SX240 HO

#content {margin: 0; padding: 0; font-family: Helvetica, Arial, sans-serif; font-size: 12px; color: #000;} dl, dl dt, dl dd, ul, ul li, img {margin: 0; padding:...

Yamaha SX240 HO

This boat has approximately 53 hours and in like new condition and only used in fresh water. Boat has been in dry storage when not in use. It's powered by twin 180...

Yamaha SX240 HO

Yamaha AR 240 HO

Yamaha ar 240 ho.

PICTURES ANDDESCRIPTION COMING SOON

Yamaha 240 SX HO

Yamaha 240 SX HO

Yamaha 240 sx ho.

Looking for the most fun 24 bowrider on the market? The Yamaha 240SX HO drafts only 17 inches and planes in 2.3 seconds! Powered by twin 1.8 Liter High Output engines,...

Yamaha SX240 H.O.

Yamaha SX240 H.O.

Yamaha sx240 h.o..

Garret McLaughlin phone 5327 East Frontage Rd NW Rochester Minnesota 55901 16 Yamaha SX240 H.O. TEXT GARRET Call or text Garret at phone for prompt and friendly...

Yamaha SX240 H.O.

Yamaha AR240 H.O.

Yamaha ar240 h.o..

2017 YAMAHA AR240 HO BRAND NEW !!!ALL OTHER MODELS IN STOCK MUST GOPRICED TO SELL NOW!ALL OTHER 2017 MODELS AVAILABLE TOO!!!MUST TEXT OR CALL KYLE PRICE @ phone...

Yamaha AR240 H.O.

Related Searches "eastward ho 24" :

The information we receive from advertisement sites may vary. Therefore, when you go to the listing site, you may not always find the same offer that you see on waa2.

  • Add Your Listing   
  • Terms of Privacy   
  • Terms of use   
  • About   

waa2 logo

Popular Sailboat Models

  • Bavaria Cruiser 46
  • Fountaine Pajot Saona 47
  • Beneteau Oceanis 45
  • Beneteau 50
  • Catalina 30

Popular Powerboat Models

  • Sea Doo Speedster
  • Sea Ray Sundancer 320
  • Bayliner Vr5
  • Beneteau Antares 11
  • Malibu Wakesetter 23 Lsv
  • Boston Whaler 170 Montauk
  • Princess V65
  • Jeanneau Nc 1095

Feedback! ▼

Waa2 login to your account, register for free, forgot password.

Would you also like to receive alerts for these other related searches?

yamaha fx 1 9 ho 24

2015 yamaha ar240 ho

fx cruiser ho 2018

Waa2 uses our own and third-party cookies to improve your user experience, enhance our services, and to analyze your browsing data in order to show you relevant advertisements. By continuing browsing please note you are accepting this policy. You are free to change the settings or get more information here >>> OK

  • Sign In or Register
  • Research Boats
  • Sell a Boat
  • Search Alerts
  • My Listings
  • Account Settings
  • Dealer Advertising
  • Portsmouth Eastward Ho

eastward ho sailboat for sale

Portsmouth Eastward Ho Boats for sale

1976 PORTSMOUTH Eastward Ho

1976 PORTSMOUTH Eastward Ho

Neptune, New Jersey

Make PORTSMOUTH

Model Eastward Ho

Category Sailboats

Posted Over 1 Month

1976 PORTSMOUTH Eastward Ho All of the prep work has been done and she's just about ready for paint. This is a great opportunity for someone looking to customize an Eastward Ho their way and do it cheap!   Seller has all parts to complete this project. Also available separately is the completely rebuilt 14HP Volvo MD7A Diesel engine, ready to be placed in the boat.  Top to Bottom rebuild was performed by world renowned Monmouth Marine Engines of Brielle NJ. $3000 Invested.

1976 PORTSMOUTH Eastward Ho

Belmar, New Jersey

Narrow Results

Current search reset all.

  • Keyword: portsmouth eastward ho
  • PORTSMOUTH (1)
  • Sailboats (1)
  • New Jersey (2)
  • Search Title Only
  • Has Picture
  • Include Sold Listings

Showcase Ads

2017 Boston Whaler 230 Vantage

2017 Boston Whaler 230 Vantage

Daly City, CA

2008 Sea Ray 260 Sundancer Cruiser

2008 Sea Ray 260 Sundancer Cruiser

2006 Sea Ray 340 Sundancer

2006 Sea Ray 340 Sundancer

Belleville, MI

2014 Malibu Wakesetter 24 MXZ

2014 Malibu Wakesetter 24 MXZ

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

Defence Forum & Military Photos - DefenceTalk

  • New comments
  • Military Photos
  • Russian Military
  • Anti-Aircraft
  • SA-21/S-400 Triumf

92N6E Radar, S-400

92N6E Radar, S-400

  • Oct 18, 2010

Media information

Share this media.

  • This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…
  • Popular Professionals
  • Design & Planning
  • Construction & Renovation
  • Finishes & Fixtures
  • Landscaping & Outdoor
  • Systems & Appliances
  • Interior Designers & Decorators
  • Architects & Building Designers
  • Design-Build Firms
  • Kitchen & Bathroom Designers
  • General Contractors
  • Kitchen & Bathroom Remodelers
  • Home Builders
  • Roofing & Gutters
  • Cabinets & Cabinetry
  • Tile & Stone
  • Hardwood Flooring Dealers
  • Landscape Contractors
  • Landscape Architects & Landscape Designers
  • Home Stagers
  • Swimming Pool Builders
  • Lighting Designers and Suppliers
  • 3D Rendering
  • Sustainable Design
  • Basement Design
  • Architectural Design
  • Universal Design
  • Energy-Efficient Homes
  • Multigenerational Homes
  • House Plans
  • Home Remodeling
  • Home Additions
  • Green Building
  • Garage Building
  • New Home Construction
  • Basement Remodeling
  • Stair & Railing Contractors
  • Cabinetry & Cabinet Makers
  • Roofing & Gutter Contractors
  • Window Contractors
  • Exterior & Siding Contractors
  • Carpet Contractors
  • Carpet Installation
  • Flooring Contractors
  • Wood Floor Refinishing
  • Tile Installation
  • Custom Countertops
  • Quartz Countertops
  • Cabinet Refinishing
  • Custom Bathroom Vanities
  • Finish Carpentry
  • Cabinet Repair
  • Custom Windows
  • Window Treatment Services
  • Window Repair
  • Fireplace Contractors
  • Paint & Wall Covering Dealers
  • Door Contractors
  • Glass & Shower Door Contractors
  • Landscape Construction
  • Land Clearing
  • Garden & Landscape Supplies
  • Deck & Patio Builders
  • Deck Repair
  • Patio Design
  • Stone, Pavers, & Concrete
  • Paver Installation
  • Driveway & Paving Contractors
  • Driveway Repair
  • Asphalt Paving
  • Garage Door Repair
  • Fence Contractors
  • Fence Installation
  • Gate Repair
  • Pergola Construction
  • Spa & Pool Maintenance
  • Swimming Pool Contractors
  • Hot Tub Installation
  • HVAC Contractors
  • Electricians
  • Appliance Services
  • Solar Energy Contractors
  • Outdoor Lighting Installation
  • Landscape Lighting Installation
  • Outdoor Lighting & Audio/Visual Specialists
  • Home Theater & Home Automation Services
  • Handyman Services
  • Closet Designers
  • Professional Organizers
  • Furniture & Accessories Retailers
  • Furniture Repair & Upholstery Services
  • Specialty Contractors
  • Color Consulting
  • Wine Cellar Designers & Builders
  • Home Inspection
  • Custom Artists
  • Columbus, OH Painters
  • New York City, NY Landscapers
  • San Diego, CA Bathroom Remodelers
  • Minneapolis, MN Architects
  • Portland, OR Tile Installers
  • Kansas City, MO Flooring Contractors
  • Denver, CO Countertop Installers
  • San Francisco, CA New Home Builders
  • Rugs & Decor
  • Home Improvement
  • Kitchen & Tabletop
  • Bathroom Vanities
  • Bathroom Vanity Lighting
  • Bathroom Mirrors
  • Bathroom Fixtures
  • Nightstands & Bedside Tables
  • Kitchen & Dining
  • Bar Stools & Counter Stools
  • Dining Chairs
  • Dining Tables
  • Buffets and Sideboards
  • Kitchen Fixtures
  • Wall Mirrors
  • Living Room
  • Armchairs & Accent Chairs
  • Coffee & Accent Tables
  • Sofas & Sectionals
  • Media Storage
  • Patio & Outdoor Furniture
  • Outdoor Lighting
  • Ceiling Lighting
  • Chandeliers
  • Pendant Lighting
  • Wall Sconces
  • Desks & Hutches
  • Office Chairs
  • View All Products
  • Side & End Tables
  • Console Tables
  • Living Room Sets
  • Chaise Lounges
  • Ottomans & Poufs
  • Bedroom Furniture
  • Nightstands
  • Bedroom Sets
  • Dining Room Sets
  • Sideboards & Buffets
  • File Cabinets
  • Room Dividers
  • Furniture Sale
  • Trending in Furniture
  • View All Furniture
  • Bath Vanities
  • Single Vanities
  • Double Vanities
  • Small Vanities
  • Transitional Vanities
  • Modern Vanities
  • Houzz Curated Vanities
  • Best Selling Vanities
  • Bathroom Vanity Mirrors
  • Medicine Cabinets
  • Bathroom Faucets
  • Bathroom Sinks
  • Shower Doors
  • Showerheads & Body Sprays
  • Bathroom Accessories
  • Bathroom Storage
  • Trending in Bath
  • View All Bath
  • Designer Picks
  • Houzz x Jennifer Kizzee
  • Houzz x Motivo Homes
  • How to Choose a Bathroom Vanity

Shop Curated Bathroom Vanities

  • Patio Furniture
  • Outdoor Dining Furniture
  • Outdoor Lounge Furniture
  • Outdoor Chairs
  • Adirondack Chairs
  • Outdoor Bar Furniture
  • Outdoor Benches
  • Wall Lights & Sconces
  • Outdoor Flush-Mounts
  • Landscape Lighting
  • Outdoor Flood & Spot Lights
  • Outdoor Decor
  • Outdoor Rugs
  • Outdoor Cushions & Pillows
  • Patio Umbrellas
  • Lawn & Garden
  • Garden Statues & Yard Art
  • Planters & Pots
  • Outdoor Sale
  • Trending in Outdoor
  • View All Outdoor
  • 8 x 10 Rugs
  • 9 x 12 Rugs
  • Hall & Stair Runners
  • Home Decor & Accents
  • Pillows & Throws
  • Decorative Storage
  • Faux Florals
  • Wall Panels
  • Window Treatments
  • Curtain Rods
  • Blackout Curtains
  • Blinds & Shades
  • Rugs & Decor Sale
  • Trending in Rugs & Decor
  • View All Rugs & Decor
  • Pendant Lights
  • Flush-Mounts
  • Ceiling Fans
  • Track Lighting
  • Wall Lighting
  • Swing Arm Wall Lights
  • Display Lighting
  • Table Lamps
  • Floor Lamps
  • Lamp Shades
  • Lighting Sale
  • Trending in Lighting
  • View All Lighting
  • Bathroom Remodel
  • Kitchen Remodel
  • Kitchen Faucets
  • Kitchen Sinks
  • Major Kitchen Appliances
  • Cabinet Hardware
  • Backsplash Tile
  • Mosaic Tile
  • Wall & Floor Tile
  • Accent, Trim & Border Tile
  • Whole House Remodel
  • Heating & Cooling
  • Building Materials
  • Front Doors
  • Interior Doors
  • Home Improvement Sale
  • Trending in Home Improvement
  • View All Home Improvement
  • Cups & Glassware
  • Kitchen & Table Linens
  • Kitchen Storage and Org
  • Kitchen Islands & Carts
  • Food Containers & Canisters
  • Pantry & Cabinet Organizers
  • Kitchen Appliances
  • Gas & Electric Ranges
  • Range Hoods & Vents
  • Beer & Wine Refrigerators
  • Small Kitchen Appliances
  • Cookware & Bakeware
  • Tools & Gadgets
  • Kitchen & Tabletop Sale
  • Trending in Kitchen & Tabletop
  • View All Kitchen & Tabletop
  • Storage & Organization
  • Baby & Kids

Ultimate Vanity Sale

  • View all photos
  • Dining Room
  • Breakfast Nook
  • Family Room
  • Bed & Bath
  • Powder Room
  • Storage & Closet
  • Outdoor Kitchen
  • Bar & Wine
  • Wine Cellar
  • Home Office
  • Popular Design Ideas
  • Kitchen Backsplash
  • Deck Railing
  • Privacy Fence
  • Small Closet
  • Stories and Guides
  • Popular Stories
  • Renovation Cost Guides
  • Fence Installation Cost Guide
  • Window Installation Cost Guide
  • Discussions
  • Design Dilemmas
  • Before & After
  • Houzz Research
  • View all pros
  • View all services
  • View all products
  • View all sales
  • Living Room Chairs
  • Dining Room Furniture
  • Coffee Tables
  • Home Office Furniture
  • Join as a Pro
  • Interior Design Software
  • Project Management
  • Custom Website
  • Lead Generation
  • Invoicing & Billing
  • Landscape Contractor Software
  • General Contractor Software
  • Remodeler Software
  • Builder Software
  • Roofer Software
  • Architect Software
  • Takeoff Software
  • Lumber & Framing Takeoffs
  • Steel Takeoffs
  • Concrete Takeoffs
  • Drywall Takeoffs
  • Insulation Takeoffs
  • Stories & Guides
  • LATEST FROM HOUZZ
  • HOUZZ DISCUSSIONS
  • SHOP KITCHEN & DINING
  • Kitchen & Dining Furniture
  • Sinks & Faucets
  • Kitchen Cabinets & Storage
  • Knobs & Pulls
  • Kitchen Knives
  • KITCHEN PHOTOS
  • FIND KITCHEN PROS
  • Bath Accessories
  • Bath Linens
  • BATH PHOTOS
  • FIND BATH PROS
  • SHOP BEDROOM
  • Beds & Headboards
  • Bedroom Decor
  • Closet Storage
  • Bedroom Vanities
  • BEDROOM PHOTOS
  • Kids' Room
  • FIND DESIGN PROS
  • SHOP LIVING
  • Fireplaces & Accessories
  • LIVING PHOTOS
  • SHOP OUTDOOR
  • Pool & Spa
  • Backyard Play
  • OUTDOOR PHOTOS
  • FIND LANDSCAPING PROS
  • SHOP LIGHTING
  • Bathroom & Vanity
  • Flush Mounts
  • Kitchen & Cabinet
  • Outdoor Wall Lights
  • Outdoor Hanging Lights
  • Kids' Lighting
  • Decorative Accents
  • Artificial Flowers & Plants
  • Decorative Objects
  • Screens & Room Dividers
  • Wall Shelves
  • About Houzz
  • Houzz Credit Cards
  • Privacy & Notice
  • Cookie Policy
  • Your Privacy Choices
  • Mobile Apps
  • Copyright & Trademark
  • For Professionals
  • Houzz vs. Houzz Pro
  • Houzz Pro vs. Ivy
  • Houzz Pro Advertising Reviews
  • Houzz Pro 3D Floor Planner Reviews
  • Trade Program
  • Buttons & Badges
  • Your Orders
  • Shipping & Delivery
  • Return Policy
  • Houzz Canada
  • Review Professionals
  • Suggested Professionals
  • Accessibility
  • Houzz Support
  • COUNTRY COUNTRY

New & Custom Home Builders in Elektrostal'

Location (1).

  • Use My Current Location

Popular Locations

  • Albuquerque
  • Cedar Rapids
  • Grand Rapids
  • Indianapolis
  • Jacksonville
  • Kansas City
  • Little Rock
  • Los Angeles
  • Minneapolis
  • New Orleans
  • Oklahoma City
  • Orange County
  • Philadelphia
  • Portland Maine
  • Salt Lake City
  • San Francisco
  • San Luis Obispo
  • Santa Barbara
  • Washington D.C.
  • Elektrostal', Moscow Oblast, Russia

Featured Reviews for New & Custom Home Builders in Elektrostal'

  • Reach out to the pro(s) you want, then share your vision to get the ball rolling.
  • Request and compare quotes, then hire the Home Builder that perfectly fits your project and budget limits.

Before choosing a Builder for your residential home project in Elektrostal', there are a few important steps to take:

  • Define your project: Outline your desired home type, features, and layout. Provide specific details and preferences to help the builder understand your vision.
  • Establish a budget: Develop a comprehensive budget, including construction expenses and material costs. Communicate your budgetary constraints to the builder from the beginning.
  • Timeline: Share your estimated timeline or desired completion date.
  • Site conditions: Inform the builder about any unique site conditions or challenges.
  • Local regulations: Make the builder aware of any building regulations or permits required.
  • Custom Homes
  • Floor Plans
  • House Framing
  • Land Surveying
  • Site Planning

What do new home building contractors do?

Questions to ask a prospective custom home builder in elektrostal', moscow oblast, russia:, business services, connect with us.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

  • Sailboat Guide

Eastward HO 24

Eastward HO 24 is a 23 ′ 7 ″ / 7.2 m monohull sailboat designed by Walter McInnis and built by C. E. Ryder starting in 1975.

Drawing of Eastward HO 24

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

  • SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
  • D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

  • D: Displacement of the boat in pounds.
  • LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

  • D: Displacement of the boat in pounds
  • LOA: Length overall in feet
  • Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Originally designed for wood contruction. The hulls of the later, FG version were built by CE Ryder (USA) and finished by Portsmouth Yacht Co. Diesel power was available as an option.

Embed this page on your own website by copying and pasting this code.

  • About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

eastward ho sailboat for sale

Eastward ho 24 preowned sailboats for sale by owner. Eastward ho 24 used sailboats for sale by owner.

Both salon settees turn into two twin beds so can sleep 4 adults. YEAR: 1977 MAKE: Portsmouth Yacht Co MODEL: Eastward Ho CLASS: Sloop, Pocket Cruiser LENGTH: 26' (24' with 2' boomkin) HULL MATERIAL: FIberglass reinforced plastic FUEL TYPE: Diesel. AIR CONDITIONING: Drop in Cruise Air. ALL PHOTOS ARE RECENT.

1978. 31'. 10'. 4.2'. Florida. $12,900. Description: Airyella is a classic New England style sloop - has incredible character, is very distinctive, and is a pleasure to sail. She is perfect for anyone looking for a boat that will sail, and anchor overnight with 1-5 people, comfortably in the bay and the Keys and beyond, at a fantastic price.

1976. 24'. 9'. 4'. Connecticut. $12,000. Description: Built by CE Ryder (USA) and finished by Portsmouth Yacht Co., Rhode Island, USA, this stout pocket cruiser is a solid full-keel sailing vessel. Omoo has had a lot of updates including new diesel engine (Kubota Beta marine), rebuilt gearbox (2021), new standing and running rigging (2020), new ...

Broker: Designed by Eldredge-McInnis and built by Portsmouth Yacht Co., the Eastward Ho is a compact yet roomy sloop designed for family cruising in comfort. She is a proven design which combines traditional elegance with practical accommodations. Nothing has been overlooked to satisfy both the sailor and the cruising enthusiast.

A boat with a BN of 1.6 or greater is a boat that will be reefed often in offshore cruising. Derek Harvey, "Multihulls for Cruising and Racing", International Marine, Camden, Maine, 1991, states that a BN of 1 is generally accepted as the dividing line between so-called slow and fast multihulls.

Model McInnis. Category Sailboats. Length 31'. Posted Over 1 Month. 1985 #1 Hull McInnis,31 ft., 4.5ft. draft, McInnis Cutter rig Eastward Ho series. 28hp Yanmar diesel, All hardwood Interior, Complete custom finished, In bristol condition. Completely blue water equipt.Leave Message at 772/283-0853. $40000.

Go to Sailing Texas classifieds for current sailboats for sale . Eastward HO 24, 1977 LOA 25'5" LWL 20' Beam 8'8" Draft 3'10" SA 283 sq ft Ballast 3,600 Displacement 7,000 Keel Full Designed by Thomas F. Eldredge/Walter J. Mcinnis and built by the Portsmouth Boat Company (UK).

Used 1978 Eastward Ho 31 for sale is located in Bienville National Forest (Mississippi, United States of America). This vessel was designed and built by the Eastward shipyard in 1978. Key features 1978 Eastward Ho 31: length 9.45 meters. engine: fuel type - diesel. 1978 Eastward Ho 31 refers to classes: sailing yachts , sailboats and sailing ...

Seller's Description. Portsmouth Eastward Ho 24, 1978 sailboat for sale I am selling my 1978 Portsmouth Eastward Ho 24 for $12,500. The boat is in Alamitos Bay (Seal Beach, CA / Long Beach, CA) where the buyer may assume the slip at $320 a month. Very nice location, across the street from the new 2nd and PCH outdoor mall.

Go to Sailing Texas classifieds for current sailboats for sale Eastward Ho, 24 ft., 1975 No. 55, 1975. Highly regarded Eldridge/McGinnis cruising design- Full keel, 4 ft. draft. ... The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more. Formula. D/L = (D ÷ 2240) ÷ (0.01 x LWL)³ ...

Seller's Description. 1980 Portsmouth Yacht Co Eastward Ho 31. She is a classic designed in 1959, built in 1980. Similar to the Sea Sprite 33 that Robin Graham sailed around the world. Custom interior Volvo Penta MD2B 25hp Nice thick teak toe rail Electric Windlass Auto Helm Updated hardware above deck Updated rigging Bimini, dodger frames ...

Search eastward ho 24 prices - more than 1 listings - Built by CE Ryder (USA) and finished by Portsmouth Yacht Co., Rhode Island, USA, this stout pocket cruiser is a solid full-keel sailing vessel. ... 1976 CE Ryder Eastward Ho 24 sailboat for sale in Connecticut. Ce Ryder eastward ho 24 . Built by CE Ryder (USA) and finished by Portsmouth ...

Boat Trader currently has 3 Eastward boats for sale, including 1 new vessels and 2 used boats listed by both private sellers and professional yacht brokers and boat dealerships mainly in United States. The oldest model listed is a contemporary boat built in 2018 and the newest model year of 2021.

Join Date: Aug 2018. Posts: 3. Eastward Ho 31 Sailboat. Cutter Rig. Eldredge McInnis design, built in RI by C. Ryder Yachts. Roller furling jib. Jib boom & roller for twin furlers. Re-built Volvo Penta 30hp with spare engine & transmission. Bimini & dodger.

35.5' Endeavour E35 Presently on the hard for winter storage at Morgans Marina, New Jersey Asking $35,000

2015 Malibu Wakesetter 22 VLX. Battle Creek, MI. $40,000. 2008 Hydra-Sports 2200 CC. Sarasota, FL. $26,500. 2 new and used Portsmouth Eastward Ho boats for sale at smartmarineguide.com.

First S-400 bltn, Elektrostal, Moscow.

Get directions to Yuzhny prospekt, 6к1 and view details like the building's postal code, description, photos, and reviews on each business in the building

Search 1,121 Elektrostal' new & custom home builders to find the best custom home builder for your project. See the top reviewed local custom home builders in Elektrostal', Moscow Oblast, Russia on Houzz.

Find company research, competitor information, contact details & financial data for STELS, OOO of Elektrostal, Moscow region. Get the latest business insights from Dun & Bradstreet.

Advertisement. Eastward HO 24 is a 23′ 7″ / 7.2 m monohull sailboat designed by Walter McInnis and built by C. E. Ryder starting in 1975.

IMAGES

  1. Rigging Hardware

    sailboat mast rigging hardware

  2. Boat Repair & Restoration. Sailboat Rigging, Varnish, Carpentry

    sailboat mast rigging hardware

  3. Sailboat Standing Rigging Diagram

    sailboat mast rigging hardware

  4. Mast and Boom Fittings by Viadana

    sailboat mast rigging hardware

  5. Boat Repair & Restoration. Sailboat Rigging, Varnish, Carpentry

    sailboat mast rigging hardware

  6. Boat Repair & Restoration. Sailboat Rigging, Varish, Carpentry

    sailboat mast rigging hardware

VIDEO

  1. Successful sailboat mast raising, and a few new additions to my boat

  2. Five Minute Install for Smart Tanks

  3. Lowering sailboat mast on a tabernacle went smoother than planned; it could have ended in disaster

  4. Sailboat mast step repair ep1: The Grind begins!

  5. HOW WE RIG OUR BOAT: A step by step guide. Ep 22

  6. Running wires and cable through my sailboat mast for quiet longevity

COMMENTS

  1. Masts, Booms, Spars, Rigging, and Hardware for Sailboats.

    Since 1961, RIG-RITE has engineered, manufactured and distributed Spars, Rigging and Hardware Systems for Sailboats. RIG-RITE stocks the largest variety of related Systems and Hardware available anywhere, Specializing in original replacement parts for Systems on yachts built the world over. Spars - Masts, Booms, Spreaders, Spinnaker Poles ...

  2. Sailboat Rigging Hardware, Parts & Equipment

    Let us help. 206-632-4462. Email. Equip yourself with sailboat rigging hardware from Fisheries Supply. Shop products from top brands like Hayn, Johnson, Alexander Roberts, Ronstan, and more.

  3. Home

    Dwyer Mast & Rigging manufactures high-quality sailboat masts, booms, hardware, and rigging. Originally founded in 1963 as Dwyer Aluminum Mast Company, the legacy continues as an OEM supplier by taking advantage of improved manufacturing methods to offer a wide range of products and services for the marine industry.

  4. Sailboat Hardware

    Dynamic Dollies. Dynamic/Seitech Dollies Compatible Parts. Type 1: Boats up to 250 lbs Dollies. Type 2: Laser, Byte & Invitation Dollies. Type 3: Curled Gunwale Boats Dollies. Type 4.1: Small/Med Bowsprit Boats Dollies. Type 4.2: Heavier Sprit Boats Dollies.

  5. Sailboat Rigging,Hardware & Accessories

    Rigging Only is a full service rigging shop. All running rigging, standing rigging, life lines, wire splicing, and custom hardware are assembled right here in our shop. We know our products, and we deliver that expertise with every job we do. Every day our technicians troubleshoot, problem solve, and repair rigging for boats like yours.

  6. U.S. Spars

    U.S. Spars is part of Z-Spars Group in France, the World's Largest Spar Builders. Z-Spars has been supplying the sailing world with quality products since 1973. US Spars supplies quality brands like Hunter, Beneteau, Com-Pac and Performance Cruising. We would be happy to quote your mast, boom, and rigging needs. US Spars takes pride in ...

  7. Sailboat Mast Steps & Hardware

    SKU: 85053 | Item ID: SCH 73-45. Special Order Only. 1-43 results of 43. 1. Fisheries Supply is your premier supplier of sailboat mast steps, tangs and exit plates from trusted brands. We offer a full range of quality mast hardware and fittings - including everything you need to set up a reefing system or running all your sails - so shop ...

  8. Explaining The Standing Rigging On A Sailboat

    The difference between standing rigging and running rigging. Sometimes things can get confusing as some of our nautical terms are used for multiple items depending on the context. Let me clarify just briefly: The rig or rigging on a sailboat is a common term for two parts:. The standing rigging consists of wires supporting the mast on a sailboat and reinforcing the spars from the force of the ...

  9. Mast Tangs & Hounds

    Ronstan mast hounds, and tangs are made of high quality 316 stainless steel, trusted by riggers and boatbuilders for many years. Tangs, hounds, and boom bails provide sturdy and reliable attachment points for vangs, halyard blocks, and other critical rigging fixtures.

  10. Hardware

    Starting Line Sailing owns a portfolio of companies manufacturing, distributing and retailing sailboats, sails, parts, apparel and accessories for sailboats under 25'. We are a business with 60 employees and multiple locations - all with a focus on helping grow sailing.

  11. Sailboat Mast Hardware, Booms, Spars

    Your shopping cart is currently empty. Discounts: Total: $0.00

  12. Kenyon Spars Main Page

    In its over 40-year production history, Kenyon has built spars for every type of sailboat from 7 to 70 feet LOA, and Kenyon has provided OEM spar and rigging packages to virtually every North American boat builder. Kenyon has built more spars than any other spar manufacturer in the U.S. In addition to building new spars, Kenyon is committed to ...

  13. Sailboat Hardware

    Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many trailerable sailboats up to around 26-feet.

  14. About

    Dwyer Mast & Rigging, formerly known as Dwyer Aluminum Mast Company, was formed in 1963 to provide high-quality sailboat masts, booms, hardware, and rigging. Our formula for growth is simple - we never compromise with quality. By taking advantage of improved manufacturing methods and an ever-increasing volume, we have been able to maintain ...

  15. Sailboat Standing Rigging

    standing rigging. All standing rigging is manufactured right here in our rigging shop -- the way it's been since 1984. We deal directly with the manufacturers of the sailboat standing rigging components that we sell, and we know the product because we use the product. We use the highest quality standing rigging components available, and we won ...

  16. Dwyer Mast & Rigging

    Dwyer Mast & Rigging is known for mast and boom extrusions, round tubing, sailboat hardware, and accessories. Toggle menu. Search. ... Dwyer Mast & Rigging. Call to Order - Mast, CFJ CAL Scholastic, unrigged. MSRP: Retail: Discounted Price: $915.00. Dwyer Mast & Rigging. ILCA Boom Sleeve ...

  17. amadeus sailing yacht

    Built by the famous Dynamique Yachts shipyard and having undergone a refit in 2018, sailing Yacht Amadeus was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design, comfortably reaching top speeds of 12 knots and ensuring excellent sailing performance. ..... The 33.5m/109'11" 'Amadeus' sail yacht built by the ...

  18. ELGLASS, OOO Company Profile

    See other industries within the Manufacturing sector: Aerospace Product and Parts Manufacturing , Agriculture, Construction, and Mining Machinery Manufacturing , Alumina and Aluminum Production and Processing , Animal Food Manufacturing , Animal Slaughtering and Processing , Apparel Accessories and Other Apparel Manufacturing , Apparel Knitting ...

  19. cal yacht club rowing

    The J/70 is 22.75 feet with an 11 foot long cockpit and deck-stepped carbon mast for easy rigging and stepping. The crew shall consist of 3 or more persons. The number of crew shall not be changed during an event. ... Members envisioned a state-of-the-art facility with 170 boat slips, a guest dock, a small boat hoist and a dry land storage ...

  20. Isomat Main Page

    Spars, Rigging, and Hardware for Sailboats. Rig-Rite, Inc. Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149 ... Most Isomat Mast Sections feature an integral Spinnaker Track on the forward side of the mast (approximately 3" wide, running the full length of the mast) for special ...

  21. eastward ho sailboat for sale

    Seller's Description. Portsmouth Eastward Ho 24, 1978 sailboat for sale I am selling my 1978 Portsmouth Eastward Ho 24 for $12,500. The boat is in Alamitos Bay (Seal Beach, CA / Long Beach, CA) where the buyer may assume the slip at $320 a month. Very nice location, across the street from the new 2nd and PCH outdoor mall....