force 5 sailboat owners manual

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Force 5 is a 13 ′ 10 ″ / 4.2 m monohull sailboat designed by Fred Scott, Jack Evans and built by AMF Corp., Alcort, and Weeks Yacht Yard starting in 1972.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

The FORCE 5 was designed in 1972 by Fred Scott and Jack Evans of AMF Alcort. By 1974 it was their second best selling boat. Over 12,000 boats were built up until 1989 when AMF Alcort changed hands several times in a short period of time. In 1993, Weeks Yacht Yard became the new builders of the FORCE 5.

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

Force 5 manual

• Thread starter rhomberg
• Start date Jul 20, 2011
• Brand-Specific Forums

Is there anyplace I can download a manual or anything similar and helpful?  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

• Forum Listing
• Marketplace
• Advanced Search
• About The Boat
• Gear & Maintenance
• SailNet is a forum community dedicated to Sailing enthusiasts. Come join the discussion about sailing, modifications, classifieds, troubleshooting, repairs, reviews, maintenance, and more!

Force 5 rigging

• Add to quote

Recently purchased an old Force 5 in great disrepair. Looking for a basic rigging guide - how to put the sail on the mast simple. Thanks for help.  

Ck out this link WEEKS Services Page Good source for parts, diagrams, etc. My son has a Force 5 and throughly enjoys the boat, good luck  

Thanks Great photo and tip - will follow-up. Thanks  

• ?            
• 173.8K members

Top Contributors this Month

• Sailboat Maintenance Tips
• Eco-Friendly Sailing Practices
• Sailboat Buying Guide
• Sailboat Insurance and Finance
• Sailboat Safety and Regulations
• Sailboat Technology Advances
• Sailing Gear and Equipment
• Sailboat Navigation Essentials
• Sailboat Restoration Projects
• Sailboat Interior Design
• Sailing Destinations Worldwide
• Sailboat Types and Designs

Essential Components for the Force 5 Sailboat: A Comprehensive Guide

force 5 sailboat parts specs

Force 5 sailboat parts specifications.

The Force 5 sailboat is an exceptional vessel that requires reliable and high-quality parts to perform at its best on the water. Here, we provide you with a comprehensive guide to the essential components you need to know about when it comes to your Force 5 sailboat.

• Main Sail: The main sail is the largest sail on the Force 5 sailboat, responsible for capturing the wind and propelling the boat forward.
• Jib: The jib sail is smaller and is used to control the direction and balance of the boat, enhancing its maneuverability.
• Spinnaker: The spinnaker sail is used to harness the wind from behind the boat, providing an extra boost of speed when sailing downwind.
• Mast: The mast is a crucial component that supports the sails and helps maintain their shape while sailing.
• Boom: The boom connects to the mast and holds the bottom edge of the main sail, controlling its position and shape.
• Standing Rigging: This refers to the wires and cables that provide stability and support to the mast and rigging system.

force 5 sailboat parts review

When it comes to the Force 5 sailboat, having the right parts can make all the difference in enhancing your sailing experience. In this review, we will take a closer look at some of the essential components that every Force 5 sailboat owner should consider. From mast and rigging to sails and hardware, these parts play a crucial role in maximizing performance and ensuring a smooth sailing journey.

1. Mast and Rigging: The mast and rigging are the backbone of any sailboat, and the Force 5 is no exception. High-quality masts are made from lightweight yet durable materials, providing optimal strength and flexibility. Similarly, top-notch rigging that includes shrouds, spreaders, and halyards ensures proper sail control and stability.

2. Sails: The sails are the driving force behind any sailboat, and the Force 5 excels in this aspect. Crafted from premium materials such as Dacron or Mylar, these sails offer exceptional durability and performance. The main sail and jib work in perfect harmony, providing power and maneuverability. Additionally, adjustable battens enhance sail shape, optimizing aerodynamics for varying wind conditions.

These essential components are crucial in unlocking the true potential of the Force 5 sailboat. Whether you’re a seasoned sailor or a beginner looking to explore the world of sailing, investing in reliable sailboat parts will undoubtedly enhance your sailing experiences. So, set sail with confidence and embrace the freedom that the Force 5 sailboat has to offer!

force 5 sailboat parts pros and cons

Force 5 sailboat parts: pros and cons.

When it comes to the Force 5 sailboat, understanding the pros and cons of its various parts is essential for any sailing enthusiast. Here, we present an overview of the key components of a Force 5 sailboat, discussing their advantages and drawbacks to help you make informed decisions:

The hull is the main body of the sailboat, and its design affects the boat’s stability and performance on the water.

• Durable and lightweight fiberglass construction.
• A streamlined shape for optimal speed and maneuverability.
• Susceptible to damage from impacts with rocks or other boats.
• May require maintenance, such as hull repairs or repainting, over time.

The sails capture the wind’s energy, propelling the sailboat forward.

• Efficient in various wind conditions, allowing for versatile sailing experiences.
• Option to choose sails of different sizes for customized performance.
• Learning to properly trim and adjust sails can require skill and practice.
• In strong winds, the sailboat can become more challenging to control.

force 5 sailboat parts interior photos

Step inside the world of Force 5 sailboats and uncover the hidden treasures found within their interiors. From the sleek design to the carefully crafted components, every detail in a Force 5 sailboat’s interior serves a purpose. Explore the following features that make these sailboats a sailor’s dream:

1. Spacious Cabin

The interior of a Force 5 sailboat offers ample space, ensuring comfort during those long days at sea. The cabin is thoughtfully designed, allowing for easy movement and providing a relaxing environment for occupants.

2. Ergonomic Seating

Sitting for extended periods is a breeze with the ergonomic seating found in Force 5 sailboats. The seats are contoured to provide maximum support and prevent fatigue, allowing sailors to focus on the journey ahead.

3. Storage Solutions

Efficient storage is a key feature of the sailboat’s interior. Well-designed cabinets, lockers, and compartments provide ample room for stowing gear and personal belongings. Stay organized and make the most of every inch of space.

Discovering the essential components of a Force 5 sailboat is the first step towards an exceptional sailing experience. The comprehensive guide above sheds light on key features that contribute to the sailboat’s functionality and performance. Whether you’re a novice sailor or a seasoned seafarer, these components ensure a safe and enjoyable journey on the open waters.

force 5 sailboat parts specifications

The Force 5 sailboat is a remarkable vessel known for its speed, maneuverability, and durability. Whether you’re a seasoned sailor or a novice looking to explore the world of sailing, understanding the specifications of the parts that make up this incredible sailboat is vital. We’ve compiled a comprehensive guide below that outlines the essential components of the Force 5 Sailboat.

• Mast : Constructed from weather-resistant aluminum, this vital part provides the necessary support for the sail.
• Boom : Made from lightweight materials, the boom attaches to the mast and holds the foot of the sail in position.
• Centerboard : A retractable fin, typically made of fiberglass, that provides stability and prevents lateral drift.
• Main Sail : The primary sail that captures the wind’s power and drives the sailboat forward.
• Jib : A smaller sail located at the front of the sailboat that aids in steering and balance.
• Spinnaker : A specialized sail used for downwind sailing, providing an extra burst of speed.

force 5 sailboat parts layout

The Force 5 sailboat is a versatile and exciting vessel that requires a solid understanding of its essential components. In this comprehensive guide, we will break down the parts layout of the Force 5 sailboat, ensuring you have a clear understanding of its various elements and how they work together to enhance your sailing experience.

Below is a detailed overview of the key components that make up the Force 5 sailboat:

force 5 sailboat parts data

When it comes to your Force 5 sailboat, having access to accurate and reliable parts data is crucial for ensuring smooth sailing and optimal performance. At [Company Name], we understand the importance of having the right components for your vessel, which is why we have compiled a comprehensive collection of parts data specifically tailored for the Force 5 sailboat.

Whether you’re a seasoned sailor or a beginner, our extensive database provides detailed information on various Force 5 sailboat parts, enabling you to make informed decisions about repairs, upgrades, and maintenance. From masts and sails to rigging and rudders, our parts data covers a wide range of essential components that are integral to the functionality of your Force 5 sailboat. With our user-friendly search interface, you can quickly find the exact part you need, ensuring a hassle-free sailing experience .

These are just a few examples of the essential components you will find in our comprehensive guide. Our detailed descriptions, accurate measurements, and recommended materials ensure that you have all the necessary information to maintain and upgrade your Force 5 sailboat. Explore our parts data today and sail with confidence!

force 5 sailboat parts diagram

The Force 5 Sailboat is a classic, single-handed sailing vessel loved by sailors worldwide. To help you navigate the intricate workings of this fantastic sailboat, we have prepared a comprehensive parts diagram. Whether you are a seasoned sailor or new to the sport, this diagram will be essential in understanding the various components that make up the Force 5 Sailboat.

Below, we have highlighted some of the key parts of the Force 5 Sailboat:

• Hull: The main body of the sailboat that provides buoyancy and stability.
• Mast: A tall vertical spar that holds up the sail and provides support.
• Boom: A horizontal spar that extends from the mast and holds the foot of the sail, controlling its angle.
• Sail: The main driving force of the sailboat, catching the wind and propelling the vessel forward.
• Daggerboard: A retractable centerboard that helps prevent sideways drift while maintaining stability.
• Tiller: A long handle connected to the rudder used for steering the sailboat.
• Rigging: The system of ropes and wires that controls the position and shape of the sail.
• Blocks and Cleats: Various pulleys and mechanisms that help control the tension and movement of the rigging.

force 5 sailboat parts for sale

Looking for top-quality parts to enhance your Force 5 sailboat performance? Look no further! We offer a wide range of premium-grade sailboat components that will take your sailing experience to new heights. From essential gear to specialized accessories, we have everything you need to keep your Force 5 sailboat in tip-top shape.

Our inventory includes an extensive selection of parts specifically designed for the Force 5 sailboat. Whether you’re a seasoned sailor or a beginner, our high-quality components are sure to meet your needs. With our affordable prices and durable products, you can trust that our sailboat parts will stand the test of time and withstand even the most demanding sailing conditions.

These are just a few examples of the essential components you’ll find in our comprehensive guide. Each component is crafted with utmost care and precision, guaranteeing optimal performance and longevity. So why wait? Upgrade your Force 5 sailboat with our top-of-the-line parts today!

Q: What are the essential components required for a Force 5 sailboat? A: The essential components for a Force 5 sailboat include the hull, sails, mast, boom, rudder, centerboard, lines, hiking straps, and various fittings.

Q: Can you explain the significance of each component? A: Certainly! The hull forms the main body and provides buoyancy. It is usually made of fiberglass, ensuring durability and lightness. Sails are crucial for harnessing wind power, and they comprise a main sail and a jib. The mast holds the sails up, while the boom keeps the bottom of the main sail in place. The rudder controls direction, and the centerboard serves to prevent sideways drift while sailing. Lines such as halyards, sheets, and control lines enable sailors to control sail trim. Hiking straps allow the crew to maintain balance in high winds, and fittings ensure all components are securely attached.

Q: What materials are commonly used for the sailboat components? A: The hull is typically made of fiberglass due to its strength-to-weight ratio, affordability, and maintenance ease. Sails are often made of Dacron or Mylar, both durable yet flexible materials. The mast and boom are commonly made using aluminum or carbon fiber, providing strength and lightness. The rudder, centerboard, and fittings are usually crafted from materials like fiberglass, aluminum alloy, or stainless steel to ensure durability and resistance to corrosion.

Q: Are there any specific maintenance requirements for these components? A: Yes, proper maintenance is essential to ensure the longevity and performance of the components. It is important to regularly inspect the hull for cracks or damage, as well as ensuring the integrity of the sails, mast, boom, rudder, and centerboard. Regular cleaning and lubrication of the fittings will prevent corrosion. Proper storage, covering, and protection from harsh weather conditions are also vital for maintaining the components in good condition.

Q: Can the components be replaced or upgraded? A: Yes, sailboat components can be replaced or upgraded to improve performance or keep up with advancing technologies. For instance, sails can be replaced to improve speed and maneuverability. Upgrading the mast or boom to different materials may reduce weight and increase durability. Centerboards and rudders can be upgraded for enhanced control. However, it is important to ensure any changes comply with class rules and regulations, especially for competitive sailing.

Q: Where can one purchase these essential components? A: Essential components for the Force 5 sailboat can be purchased from various marine retailers, both online and in physical stores. Some well-known manufacturers and suppliers specialize in sailboat components and offer a wide range of options to handle different needs and budgets.

Q: Are there any specific safety considerations related to these components? A: Yes, safety is paramount while sailing. It is important to ensure all components are in good condition before heading out on the water. Regularly check the lines for wear and tear, ensure fittings are securely fastened, and verify the integrity of the hull. Additionally, wearing appropriate safety gear like life jackets and harnesses is crucial. Properly maintaining and inspecting all components will help avoid mishaps on the water.

Closing Remarks

In conclusion, the Force 5 sailboat boasts a range of essential components that ensure optimal performance and a remarkable sailing experience. From its robust mast and rigging system to its efficient sail and ergonomic cockpit, every element of the Force 5 is carefully designed and crafted to enhance speed, stability, and maneuverability on the water. By understanding and investing in these vital components, sailors can unlock the full potential of their Force 5 sailboat and embark on countless thrilling adventures. Whether you are a novice sailor or an experienced racer, the comprehensive guide provided here offers a valuable resource to help you navigate the essential components of this exceptional sailboat, empowering you to meet your sailing goals with confidence. So set sail with the Force 5, and let its outstanding components propel you towards unforgettable sailing experiences.

• Recent Posts

• EVERGLADES BOATS V 2007 Boats for Sale & Yachts Updated for 2023 - March 19, 2024
• Carver 45′ Voyager 2003 Boats for Sale & Yachts Updated to 2023 - March 19, 2024
• Pacific Seacraft 1987 Boats for Sale & Yachts in 2023 - March 19, 2024

Related posts:

LEAVE A REPLY Cancel reply

Save my name, email, and website in this browser for the next time I comment.

EVERGLADES BOATS V 2007 Boats for Sale & Yachts Updated for 2023

Carver 45′ voyager 2003 boats for sale & yachts updated to 2023, pacific seacraft 1987 boats for sale & yachts in 2023, carver 45′ voyager 2000 boats for sale & yachts updated for 2023, silverton 45′ convertible 2007 boats for sale & yachts in 2023, more from author.

Quick Links

• Privacy Policy
• Cookie Policy

Popular Articles

• Force 5 Hull Identification

Play the Numbers Game (What's a HIN?)

Did you ever wonder what that strange series of letters and numbers on the transom of your boat are. Well, if you have taken the Nautical Know How course you know they are Hull Identification Numbers (HIN) and that they are required. But, what do they mean?

All boats manufactured or imported on or after November 1, 1972 must bear a HIN. The HIN is a 12-character serial number that uniquely identifies your boat. The HIN has an important safety purpose. It enables manufacturers to clearly identify for boat owners the boats that are involved in a defect notification and recall campaign. A HIN is not the same as a State registration number, which may be required to be displayed on the bow of your boat. The HIN is a Federal requirement; your boat’s registration number is a State requirement like the license plate on your car. The HIN, however, is required to be shown on the State certificate of registration.

*Key to Month of Model Year

Figure 1 - HIN Formats Before August 1, 1984

The boat manufacturer must display two identical hull identification numbers, no less than one-fourth of an inch high, on each boat hull. The primary HIN must be permanently affixed (so that it can be seen from outside the boat) to the starboard side of the transom within two inches of the top of the transom, gunwale, or hull/deck joint, whichever is lowest. On boats without transoms or on boats on which it would be impractical to the transom, the HIN must be affixed to the starboard outboard side of the hull, aft within one foot of the stern and within two inches of the top of hull side, gunwale, or hull/deck joint, whichever is lowest. The starboard outboard side of the hull aft is the preferred HIN location for many manufacturers. On catamarans and pontoon boats the HIN must be affixed on the aft crossbeam within one foot of the starboard hull attachment.

Figure 2 - HIN Format After August 1, 1984

Boats manufactured or imported on or after August 1, 1984, also have a duplicate secondary HIN affixed somewhere on an unexposed location inside the boat or beneath a fitting or item of hardware. The purpose is to help authorities identify your boat if a thief or vandals remove or damage the primary HIN on the transom. It is illegal for anyone (manufacturer, dealer, distributor, or owner) to alter or remove a HIN without the express written authorization of the Commandant, U.S. Coast Guard.

The regulations prescribe the format of the HIN. The first three characters are a MIC (Manufacturer Identification Code) assigned by the Coast Guard to the manufacturer or the person importing the boat; characters four through eight are a serial number assigned by the manufacturer; the last four characters indicate the month and year the boat was built, and the model year. Prior to August 1, 1984, the manufacturer had the option of expressing this in the form of a model year designation.

The Coast Guard maintains a searchable database of MICs if you want to check yours out -  click here .

Individuals building boats for their own use and not for the purposes of sale are what are referred to as "backyard boat builders". They must obtain a 12-character HIN from their State boating agency. The Manufacturer Identification Code at the beginning of the HIN for a "home built" boat is an abbreviation for the State followed by a "Z" which indicates that it is a State identification.

• You are here:  

Latest Articles

• 2023 Force 5 North American Championship Registrations
• 2023 Force 5 North American Championship
• 2023 Force 5 Midwinter Championship
• 3rd Annual LMYC Detroit River Dinghy Regatta
• Force 5 Southeast Championship - 2022 Hospice Regatta

Latest Events

• Forgot Login?

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Force 5 Sailboat

Force 5 Sailboat Boats for sale

Force 5 Sailboat F5 Force 5

Patchogue, New York

Make Force 5

Model Force 5

Category Racer Boats

Length 14.0

Posted Over 1 Month

1970's Force 5 Sailboat Solid boat sail as is or a great restoration candidate. The topsides gelcoat is original. The bottom was painted at some point and could stand to be sanded and refinished but isn't absolutely necessary. All the rigging is included, sail, spars, mast, rudder, centerboard, etc... The hull is stored outside and everything else has been kept indoors. Contact me for more information.

Force 5 F5 Racing Dighny Sailboat Complete

70's Force 5 Sailboat Complete All rigging and sails always stored indoors and in great condition. Hull in nice shape has original blue gel coat topside. Someone at sometime painted the bottom and side which could stand to be refreshed. Currently stored outside upside down. It's all there ready to sail. Call, email, or txt Brian six three one five one three one three five six Like a sunfish laser optimist opti 420

Cruising Sailboat

Canastota, New York

Asking $45,000 Call or e-mail to arrange a visit: [email removed] or leave a message on my skype phone at 315-254-2452. The boat is located near Syracuse, NY. For full ad go to: https://persephone37.wordpress.com/ Dreaming of living aboard and sailing off to the islands? Persephone is a beautiful, well-maintained, fully equipped, self-sufficient, center cockpit sloop ready for cruising. As a well equipped and comfortable long-term live aboard yacht, she has taken her current owners to the Caribbean and back to upstate New York a number of times- and now she’s ready to take you to your dream destinations. “Persephone” was designed as the perfect coastal cruising vessel… large enough to be very comfortable yet simple enough to be able to sail her by yourself… a perfect combination of comfort and function. Through years of cruising, thoughtful upgrades and enhancements, her current owners have produced an exceptional live aboard vessel. Her extensive upgrades and refurbishing over the years makes her the one of the best equipped cruisers you will find in this price range on the market. Seasoned sailors will immediately appreciate the new Awl Grip on the hull, and on deck the Lewmar 65 winches and deep comfortable center cockpit protected from the elements by a dodger and bimini. Her windlass makes anchoring simple, and after the anchor is down, a cold beverage from the custom refrigerator will be appreciated. Worried about your beverages warming up at anchor? Never fear- her solar panels and wind generator output provides more than enough power. Down below, she has a spacious salon with center folding dinette, 6' headroom that leads forward to a head and V-Berth. LED cabin lights and aluminum Lewmar port lights keep brighten the interior, day or night. Her two staterooms and two heads offers plenty of room, lots of privacy, and an abundance of storage. When the winds dies, she is equipped with a 32 hp Universal diesel engine, 2 fuel tanks with Racor filters, and two 100 gallon water tanks. Main Salon ***Pictures Below***** The main salon features settees, port and starboard, and a centerline table with folding leaves and storage. There are plenty of opening ports, and an overhead hatch to provide wonderful ventilation. There is a navigator’s station aft of the starboard settee and the galley is aft of the port settee. A large custom made marquetry sailboat scene graces the forward bulkhead to port. Master Stateroom The O’Day 37 has a unique aft cabin master stateroom entered from the cockpit. It is completely private with a wonderful queen size custom pillow-top spring mattress berth. There is a hanging locker to port with storage shelves adjacent to the locker and berth. Additional storage is provided by more shelves and drawers to starboard. Five opening ports, together with the aft cabin companionway, provide wonderful ventilation. A private ensuite head contains a manual head and a vanity sink as well as a single opening port and overhead hatch. Guest Stateroom The guest stateroom is forward in the forepeak and consists of a comfortable v-berth with filler, storage under and in drawers and on shelves. An overhead hatch and an opening port allows for great ventilation. There is a full-size hanging locker aft of this cabin and opposite the head. Galley The spacious well laid out u-shaped galley is to port forward of the companionway and opposite the navigation station. It features 2 deep sinks with a butcher block lid, 3 burner stove with oven, a microwave, and plenty of easy access storage. The large, sensible, easy access refrigerator/freezer has a stainless steel holding plate and is just aft of the navigation table. Cockpit By far, the most comfortable cockpit you’ll find. Deep coamings with just the right angle to sit back and enjoy the sailing or the sunset. The teak table provides room for entertaining and dining all under the shade of the bimini. 2 huge lockers provides storage for everything! The helm has superior visibility while underway. “Persephone” 1981 O’Day Center Cockpit Sloop Builder: O’Day Designer: C. Raymond Hunt Dimensions LOA: 37' LWL: 30’4? Beam: 11’3? Displacement: 14,000 lbs Draft: 5' Bridge Clearance: 47' Ballast: 6,000 lbs Engine: Universal Diesel HP: 32 Tankage Fuel: 50 gals in 2 tanks Water: 185 gals in 2 tanks Holding: 15 gals Rigging & Sails New Rigging – New Stayloks – New Turnbuckles New Fully Battened Mainsail – 8.4 oz. Contender Cloth, 2 reef points Profurl Roller Furling 120 roller furl jib 90/Yankee 9 oz. roller furl jib Barient #10 main halyard winch Barient #18 mainsheet winch Barient #18 jib halyard winch Harken Lazy Jacks Lewmar Boom Vang Oversized Main & Jib Halyards – 9/16 Sampson Yacht Braid All Running Rigging – Samson Yacht Braid 2 Lewmar 65 primary self-tailing winches with Sunbrella covers Schaeffer oversized jib cars Electronics Raymarine 5000 Autopilot with below deck linear drive Standard Horizon DSC VHF Mic WHAM capable New Garmin 740 Touchscreen Color Chartplotter GPS (2012) has US Coastal + Alaska & Hawaii and Bahamas Explorer charts Standard Horizon DS 45 Depth Sounder Standard Horizon Speed Log Standard Horizon Wind Meter JRC 24 mile radar LaCrosse Weather Station Mast VHF Antenna Electrical 12v/110v systems with clearly labeled electrical panel and breakers 12 Volt Ships Power System 30 Amp Shore Power System 3 Siemens 75 watt solar panels on custom built arch 12v lighting Masthead Tri-Color Light/Anchor Light Class 2 Running Lights which are larger & have more visibility range 4 Interstate Deep Cycle Golf Cart Batteries (400 amp hour) New 2008 New Alternator 2009 Aerogen 6 Wind generator 2000 watt Inverter 12 volt bilge pump Propane shutoff solenoid switch for safety in galley Galley U-shaped galley with lots of storage Isotherm stainless steel holding plate DC refrigeration system with bronze March pump and digital Carel Controls Hot/cold pressure water Shurflo freshwater pump Hillerange LPG 3 Burner Stove with oven Microwave Oven 2 deep stainless steel sinks Cabinets, drawers and top loading dry storage locker Butcher block sink cover for added counter space Force 10 stainless steel 6 gallon hot water heater engine exchange Accomodations New LED lighting in main cabin 15” Flatscreen television with DVD player AM/FM stereo with 2 speakers Teak Interior with Teak & Holly Sole Large Framed Marquetry in Salon Sckandvik Faucet/Shower – Forward Head New Jabsco Toilets (2009) (3) opening hatches, (16) opening Lewmar aluminum ports Screens for some ports Engine 3 Engine room lights Rebuilt Universal diesel fresh water cool engine with easy access from front and back with 2 New water pumps and heat exchanger PSS Dripless Shaft Seal Hurth Transmission new 2004 Groco Bronze Sea strainer Dual Fuel Tank System with Dual Racor Filters – 50 gallon capacity AWAB 316 Stainless Steel hose clamps used throughout – Superior Non-Perforated – Lasts forever Deck New vinyl covered stainless steel double lifelines with opening gates each side Foam vinyl covered custom cockpit cushions Dodger with attached Bimini Anchor Locker Propane Locker on Aft Deck 44 lb Bruce Anchor with new (2012) 110’ oversized 3/8” chain and 120' 5/8” rope rode Fortress FX 23 with 50’ 3/8” chain & 80’ 5/8” rope rode Lewmar 2000 Electric Windlass Polished Stainless Steel Engine Controls 28” Stainless Steel steering wheel Stainless Steel Ritchie Compass at Helm Stainless Steel Bow Pulpit Stainless steel Stern Rail with opening gate Stainless steel built-in stern swim ladder Brushed stainless steel custom-built stern arch with dinghy davits Manual bilge pump Keel stepped mast Performance fin keel Stainless steel bow chocks 3 Bow Cleats Mainsail Cover Custom made companionway washboards with Lexan windows Edson Pedestal with Pedestal Guard Teak folding cockpit table with 4 cup holder Outboard Motor storage board Lifesling with Sunbrella cover Force 10 BBQ propane grill with custom cover Additional Davis radar reflector USCG safety equipment Boat hook, lines, fenders Emergency Tiller

1985 Tayana 37 Cruising Sailboat

Deale, Maryland

Make Tayana 37

Category Cruiser Motorcycles

Length 37.0

Specifications: Year: 1985 LOA 42’ 2” (including bowsprit) LOD 36’ 8” (excluding bowsprit) LWL 31’ Beam 11.6” Disp. 22500 lbs. Ballast 7340 lbs. Draft 5’ 8” Sail Area 861 sq. ft. Engine: Perkins 4108 HP: 50 Designer: Robert Perry Builder: Ta Yang Yacht Building Co. (Taiwan) Keel Type: Full Keel Description: The Tayana 37 is perhaps the most successful semi-custom cruising boat to be built. The Tayana 37 has been constructed of the finest materials, using the best techniques. There is no better yacht in her size range on the market. With care and proper maintenance she will not only prove to be an excellent investment, she will take you cruising anywhere in the world safely and comfortably. This is being proven almost daily. Ocean crossings by Tayana 37’s are routine. Circumnavigations have been reported. By the same token, over 500 of these yachts are the primary homes of their owners. Condition: She has had many upgrades over the time that I have owned her (6 years). New Awlgrip topsides and decks (2016), Propane stove 2014, new fuel tank (2013), New canvass (2013), Cabin heater (2014), new tile counters (2015), new bowsprit (2013), bottom job (latest summer 2016), new cushions in main salon and forward cabin (2017). Electronics upgrade to Raymarine ST60+ (2016), New battery house and start banks (2016), updated running rigging, all new sea cocks (2016). Accommodations: Although ideally set up for a couple to cruise, this Tayana sleeps 8 in three cabins. The spacious galley is just down the companionway to starboard. To port is a single, private pilot berth in its own cabin. With drawers under the berth, shelves, cabinets and a hanging locker there is excellent storage. I personally love this little cabin, I can have a crowd of guests aboard and still have privacy in my single “captain’s cabin”. With three opening ports and a fan, I can stay cool even in summer time. Forward of the pilot berth cabin is a large nav station with storage drawers below.The main salon to port has a pull out double berth and L shaped dinette to Port. There are also two stow-away pipe berths that can be pulled out to sleep a total of 5 in the main cabin. Forward of the main salon is great storage in hanging locks and drawers to starboard and a large head with separate shower to port. A double Pullman berth is forward of the head, also with great storage. Deck Hardware FRP decks, very solid- no soft spots, no teak (repainted, AwlGrip 2016) Teak Skylight, opening with screens Teak forward hatch Laminated bow sprit (new 2014) with teak platform and anchor rollers Anchor and anchor chain set up on bowsprit platform (2) SS Stanchions, vinyl covered dbl lifelines with gates Opening bronze ports (10) Two coaming lockers Staysail track Teak companionway hatch with doors Teak cockpit seats and cockpit grating Teak exterior trim Teak chain lockers with two deck pipes SS Bow pulpit Dorade vents (four) Propane locker for two 20lb tanks, vented overboard Aluminum genoa tracks with cars Aluminum mainsheet traveler with roller car 2 Lewmar 48 self-tailing primaries 2 Lewmar 30 self-tailing winches SS dinghy davits on stern Hull Hand laid up FRP. Full Keel with encapsulated ballast Teak rubrail Teak toe rail Hull ground down with two coats of long term bottom paint (summer 2016) Topside repainted, AwlGrip 2016 Sails Main with three reef points, tanbark Main sail cover with lazy jacks (stack pack) Staysail, tanbark Staysail cover Yankee with roller furling, tanbark Storm Jib, tanbark Storm trysail 150% Gennaker Interior: Teak and holly cabin sole (real teak and holly, not laminate) Solid teak cabinetry and doors White tile counters (new 2015) New cushion covers (2017) Stove alcove lined with SS Interior teak handrails Two Ice Boxes insulated and SS lined, top ice chest accessible from galley and cockpit Force 10 Propane cabin heater Steering Pedestal Steering SS and bronze binnacle Teak and SS emergency tiller Teak traditional steering wheel SS rudder shaft Plumbing 90 gallon aluminum fuel tank (new 2014) 30 gallon FRP holding tank Hot and cold pressure water system One high capacity electric bilge pump on manual switch One low capacity electric bilge pump on float switch One High capacity manual pump Two SS fresh water tanks Manual Marine head Water heater 110 volt and engine heated Sea cocks on all through-hull fittings (all sea cocks new 2016) Galley: Two well insulated ice boxes lined with SS. Top ice box is accessible from the galley and the cockpit, Double stainless steel deep sinks, 3 burner Force 10 Propane stove with oven and broiler Overhead cabinets, deep well storage, counter cabinets, drawers and offer plenty of storage. Head: Marine Head with holding talk and deck pump out. Separate shower room. Hot and cold pressure water. Engine: Perkins 4-108 Diesel engine. Engine runs strong. New high pressure pump, fuel lines and injectors (2015) Fiberglass drip pan Electronics and Equipment: Radar: Raytheon Depth meter: Raymarine ST 60+ Speed meter and log: Raymarine ST60+ Wind speed and direction meter Raymarine ST60+ Binnacle mounted Ship’s Compass VHF Radio, Icom IC-M80 SSB with tuner and backstay antenna, Kenwood TS-430S Battery selector switch with start and house batteries Shore power with 110v plugs below Radio am/fm with speakers Extra Equipment Folding mast steps to top of mast Three blade prop Dock Lines Fenders Boat Hook Type IV throwable PFD Oil Lamps Dinghy Davits Outboard engine mount Propane cabin heater Cockpit cushionsShe is available for inspection, email to schedule an inspection with one of representatives. Please inspect the vessel to your satisfaction prior to purchase. DisclaimerI offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated PRIOR TO BIDDING. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Vessel comes as it, where is with no warranties or guarantees.

1970 Van der Meer Sailboat

Ventura, California

1970 Van der Meer Sailboat, 51 ft Steel Ketch, Super World Cruiser. Felicity was built in Holland by Van der Meer with the finest quality of Steel construction, and has been well maintained by her current owners for over 25 years. She is 44 ft on Deck, 51 ft O.A. Length, 12 ft 11 in Beam, Center cockpit. Ford Lehman 4D254 80hp diesel engine with 100 low hours, crusing speed of 7 knots, max speed of 8.5 Radar, Inverter, Furling jib and Genoa, with an elegant Mahogany interior. Teak decks, mahogany interior. Aft cabin with head and shower, also has a separate entrance from cockpit. Forward cabin with galley and chart table. Dinette with sleeping bunks, shower and head, and v-berth. Center teak cockpit with dodger. Sleeps 6-8, dining table, Mahogany floor throughout, 2 heads with sinks ans showers, manual fresh water system, pressure fresh water system, water heater, 110v engine, engine heat exchange heat, salt water pump, single sink, Force 10 8-burner propane stove with oven, microwave oven, Grunert Refrigeration, Freezer. Raytheon 201 VHF, Brookes and Gatehouse Fathometer, knotmeter, windspeed, wind direction, NAVADD 8000 Electronic chart, Furuno 1731 radar, wood freeman 420 autopilot, pedestal compass, barometer, humidity, 12v and 32v DC, 110v AC, shore power cord, manual bilge pump, electric bilge pump, newmar 12v & 32v battery charger, heart inverter, 32v battery, 12v battery, Northern lights M673 Diesel generator, cutter rig ketch, pro furl roller reefing jib, pro furl roller reefing Genoa, Mizzen staysail, Cockpit Dodger, sail covers, Window covers, CQR Anchor with chain, AFT Bruce Anchor Bow Roller, 2+2 Anchors (CQRs), Stern Roller, plath electric windlass, wheel steering, emergency tiller, deck stepped main mast, deck stepped mizzen mast, Spreader lights, wind indicator at Masthead, Stainless standing Rigging, external Halyards, double rail bow pulpit, double stern rail, double lifelines, stainless and teak handrails, portable ladder (2) headsail furling gear, boom vang, cockpit table, cockpit cushions, BBQ She is currently in need of some TLC and minor repairs, but this is a stout, well built offshore cruiser. With a draft of less than 6 ft, she is the perfect vessel for cruising to Mexico, the Virgin Islands and the Caribbean. The possibilities are endless. Current replacement cost exceeds 1 million dollars. Price reduced to best offer over $26,000 for fast sale to a good home! Located in VENTURA CA 93003, Contact Dennis at 805-290-6119 (cell) or 805-650-8888 (office) for more information. This For Sale by Owner Listing was provided by BoatSellersUSA, a division of National Marketing Classifieds - NMSell To view the original go to http://www.boatsellersusa.com/view/1181 cartype: Sail Boats

1982 S2 8.5A 28 foot Sailboat with Inboard Yanmar Diesel - In Racine Wisconsin

Racine, Wisconsin

Length 28.0

**** PLEASE NOTE: Because of the relatively low BUY IT NOW price, payment will be due within 24 hours via paypal. I will send you a paypal invoice after a successful "BUY IT NOW" or an accepted offer. Please only buy or offer if you have positive feedback. Your buy it now or offer constitutes a binding agreement to purchase so please ask questions BEFORE clicking "BUY IT NOW" or making an offer. After receiving your payment I will overnight you the title or meet you in person depending on timing and my availability.**** Very Nice S2 8.5A (28ft) for sale in Racine Wisconsin. I'm expecting a second child soon and really don't want to sell this excellent great lakes cruiser. Clean and clear Wisconsin title.Tiller steering. (always my preference)Inboard Yanmar diesel is extremely clean and fuel efficient. Recent full Yanmar service checkout since boat was last launched.Furling headsail in good shape. Newer mainsail in excellent shape.New Raymarine autopilot professionally installed. Shore power and long power cable. Halyards in good shape.New marine head and holding tank (never used). Chainplates recently professionally rebedded by boatyard. Interior in excellent shape.Solid fiberglass hull. All tabbed in joinery in excellent shape. Cored deck with NO soft spots. Very large cockpit.Includes steel cradle as well. I looked at everything in this size and price range in the lower half of lake Michigan for two years and this is the nicest boat I could find by leaps and bounds. Solid turnkey value. Launch is all ready paid for with the boat yard. You can be in the water tomorrow. No better deal can be found on solid and ready to sail Great Lakes cruiser with a clean inboard diesel - it is just time for me to move it along. Currently out of the water at Racine Riverside Marina in Racine, WI. Summer storage is paid through the end of this month and a launch is included in the purchase. If you chose not to launch until next season the storage rates at the Marina for winter are extremely reasonable and the pre-paid launch will still be yours come next summer. Here is a Review from "Practical Sailor" S2 8.5 MeterThe 8.5 is good for cruising the coasts in comfort and style--as long as you like the modern look.When Leon Slikkers founded S2 Yachts in 1973, much of the attention to detail that had previously characterized Slickcraft powerboats—Slikkers’ earlier boatbuilding venture— traveled with him to the new boatbuilding company. In the 13 years S2 sailboats were in production (S2 still makes powerboats), the company produced a variety of modern cruising designs from the board of Arthur Edmunds, all characterized by longish fin keels, freestanding spade rudders, straight sheerlines, and a staggering variety of draft options and cockpit locations. In the early ’80s, S2 reached more for the performance market with the Grand Slam series of small boats, and the 10.3 “offshore racer-cruiser.” These higher performance boats were designed by Scott Graham and Eric Schlageter, well known for their MORC and smaller IOR designs.The S2 8.5 is a 28-footer cast in the company’s traditional mold. Her hull dimensions, sail area, displacement, and general design characteristics put her square in the middle of the modern 28-footers such as the Tanzer 8.5, Newport 28, O’Day 28, and the Pearson 28.The boat’s styling is conventionally modern. She has a fairly straight sheer, fairly high freeboard, and low, raked cabin trunk with dark tinted flush ports. Production of the 8.5 ran from 1981 to 1983. The boat was replaced by the similar S2 8.6, which continued until S2 stopped making sailboats in 1986.ConstructionThe hull of the S2 8.5 is a solid hand layup. Glasswork is excellent, and is noted by owners as one of the main considerations in buying the boat. Gelcoat quality is excellent.Slight roving printthrough is evident, but it is not objectionable. Minor hard spots are visible in the topsides, probably caused by the attachment of interior furniture and bulkheads.The deck molding is cored with end grain balsa, giving a solid feel underfoot as well as providing reasonable insulating properties.S2’s hull-to-deck joint is the basic type that we would like to see adopted throughout the industry. The hull molding has an inward-turning flange, onto which the deck molding is dropped. The joint is bedded in flexible sealant, and through bolted on six inch intervals by bolts passing through the full length slotted aluminum toerail. The joint is also through bolted across the stem.All deck hardware is properly through bolted, although pulpits, cleats, and winches merely use nuts and washers on the underside of the deck, rather than the aluminum or stainless steel backing plates we prefer.Another feature of the hull-to-deck joint is a heavy, semi-rigid vinyl rubrail at the sheerline, quite aptly termed a “crash rubrail” by S2. This will go a long way toward absorbing the shock of the inevitable encounters with docks and the other hard objects that seem to be attracted to the topsides of the typical sailboat. Although this rail is black when the boat is new, it had dulled to a chalky gray on older S2’s we examined.The builder advertises “bronze seacocks on all through hull fittings.” These are not traditional tapered plug seacocks, but are ball valves mounted directly to through hull fittings. A proper seacock—whether it uses a ball valve or a tapered plug—has a heavy flange to allow through bolting to the hull. This is an important safety feature. Should a valve seize, it may become necessary to apply a great deal of leverage to the handle in order to open or close the valve. The deeply threaded through hull stem can easily break under these conditions, and more than one boat has been lost in this manner.We also suggest that seacocks be installed on the cockpit drain scuppers and the bilge pump outlet, both of which may be under water while the boat is sailing. Light air performance would benefit by the fairing in of the through hull fittings, particularly the head intake and discharge, both of which are far enough forward to have a significant effect on water flow past the hull.Ballast is a 3,000 pound lead casting, epoxied inside a hollow keel shell. We prefer an external lead casting bolted to the hull for its shock-absorbing qualities and ease of repair. This preference was reinforced recently when we examined an old Bristol 27 just sold by a friend. The surveyor noticed dampness near the bottom of the leading edge of the keel, which showed slight external damage. Probing the loose putty revealed some abrasion of the glass keel molding. In order to sell the boat, it was necessary to grind away a large portion of the glass at the front of the keel, dry out the ballast, and reglass the lead—a job that took several days of work and cost our friend a fair chunk of money.Much of the boat’s interior structure is plywood, glassed to the hull. Fillet bonding is neat and workmanlike with no rough edges to be found.Chainplates are conventional stainless steel flat bar, bolted to bulkheads and plywood gussets in the main cabin. These are properly backed with stainless steel pads. Due to the fact that the hull is lined throughout with a carpet-like synthetic material, it is not possible to examine the bonding of the chainplate knees to the hull. The stemhead fitting is a stainless steel weldment, through bolted to the deck and hull and reinforced inside the hull with a stainless steel gusset to prevent deflection of the deck from the pull aft of the headstay. We’d like to see a metal backup pad behind this fitting rather than the washers which are used.General construction is thoughtful and well executed, with excellent glasswork, a strong and simple hull-to-deck joint, and reasonably installed hardware and fittings.Handling Under PowerAlthough some early models of the 8.5 used a seven horsepower BMW diesel, the 1982 version employs an eight horsepower Yanmar. These small Yanmars are quite impressive, light in weight and far smoother than the company’s older rockcrushers.Because of the high freeboard and considerable windage of the 8.5, the standard engine is the absolute minimum power plant for the boat. Recognizing this fact, the company offered a 15 horsepower, two-cylinder Yanmar as an option. For another 75 pounds and $1,150, we would want this option on the boat if the ability to get places under power is a real consideration.The extra fuel consumption of the larger engine will scarcely be noticed. The 18 gallon aluminum fuel tank will probably give a range under power of over 250 miles—more than adequate for a 28 foot cruising boat.The fuel tank is located under the cockpit and is securely mounted and properly grounded. There is an easily reached fuel shut off between the engine and tank. Unfortunately, the fuel fill is located in the cockpit sole. Spilled diesel oil turns even the best fiberglass nonskid into an ice skating rink. Fuel fills should be located on deck, where spills can be efficiently washed away.Engine access is via a large removable panel on the inboard face of the quarterberth. This panel lacks any kind of handhold to make it easily removable, which will discourage regular checking of the engine oil. The top companionway step also removes for access, but it’s a long reach to the dipstick.There is no oil pan under the engine. It will be necessary to be very careful when changing oil to keep the bilge clean. We have yet to see anyone change oil and filters on a boat engine without spilling something.With the quarterberth panel removed, access for routine service is excellent. The quarterberth has remarkable headroom over, so that the mechanic will not feel like a trapped spelunker after a half hour of work. Engine removal will require some joinerwork disassembly.Handling Under SailThe S2 8.5 is no slug under sail. Her PHRF rating of 174 to 180 compares very favorably to other boats of her size and type. The Sabre 28, for example, has a rating of 198. The Pearson 28 about 195, and the O’Day 28 about 198.Part of this is no doubt due to the fact that the standard sails on the boat come from the North loft. While North’s OEM sails may not be the vertical cut Mylar-Kevlar wonders that adorn custom boats, they’re a lot better than most.S2 now uses Hall spars. The simple masthead rig is extremely clean, with airfoil spreaders and internal tangs. The boom features an internal outhaul and provision for two internally-led reefing lines, with cam cleats at the forward end of the boom.The deck-stepped mast is mounted in a stainless steel deck plate incorporating plenty of holes for the attachment of blocks. Halyards and Cunningham lead aft along the cabin house top to a pair of Lewmar #8 winches. Lewmar #16s are optional, but hardly necessary.The main is controlled by a six-part Harken rig mounted on the end of the boom, and a Kenyon traveler mounted on the aft cockpit coaming. This will work fine with the tiller-steered version of the boat. With wheel steering, the mainsheet is likely to be a nuisance to the helmsman.Because of the end-of-boom sheeting, a boom vang will be essential for full mainsail control. Ironically, the boat’s drawings show almost mid-boom sheeting, with the traveler mounted on the bridgedeck at the forward end of the cockpit. This is probably a better arrangement, although it heavily loads the center of the boom and requires more sheeting force.Owners of 8.5s have little but praise for the interior of the boat. The cabin has a wide feeling, created by pushing everything outboard. The “chart area” on the plan is a myth, as far as we can tell.Despite the fact that the shrouds are set well in from the rail, the boat lacks inboard headsail tracks. Rather, you are limited to snatch blocks shackled to the toerail track. A six-foot piece of track set inboard of the rail would be a useful addition.Standard headsail sheet winches are two-speed Lewmar #30s. Options include both larger winches and self-tailers, both of which are worth considering for either racing or cruising. The cockpit coamings are wide enough for mounting larger primaries and secondaries.The high-quality rig and sails add to the price of the S2, but they are additions well worth the cost.Deck LayoutThe deck layout of the 8.5 is clean and functional, with no toe stubbers to catch you unawares. There are two foredeck mooring cleats, but no bow chocks. The necessity to lead an anchor line well off the boat’s centerline, coupled with high freeboard forward, is likely to result in a boat which sails around on her anchor or mooring. The 8.5 has a pair of wide stainless steel chafing strips at the bow which will greatly protect the deck from the chafe of the anchor line.The 8.5’s foredeck anchor well is one of the best we’ve seen. It is shallow—just deep enough to hold an anchor and adequate rode. There are double scuppers, which offer less likelihood of clogging. The lid is held on by a full-length piano hinge, and there is a positive latch.The shallow locker well above the waterline means that water is less likely to enter through the scuppers, which can be a real problem with a deep anchor well. When the bow pitches into waves, a deep anchor well can fill with water, and if the scuppers clog with debris, you can find yourself sailing around with several hundred pounds of extra weight in the worst possible position. There is no provision for securing the bitter end of the anchor rode, but a big galvanized eyebolt installed in the well by the owner will solve that one.The running lights leave something to be desired. Their location at deck level just aft of the stem makes them vulnerable to damage when handling ground tackle. We much prefer an international style bicolor mounted on the pulpit, another two feet off the water: easier to see, and out of the way. Wiring for the running lights is exposed in the anchor well, and should be secured out of the way.A recessed teak handrail runs the full length of the cabin trunk, serving the dual function of heavy weather handhold and cabin trim piece. Its shape makes it far easier to oil or varnish than the conventional round handrail, although the wide, flat section seems somewhat awkward after years of grabbing round rails.The 8.5’s cockpit is the maximum size we’d want to see on a boat of this size. The T-shape is designed to accommodate the optional wheel steerer, yielding a somewhat odd layout for the tiller-steered version. A bench seat spans the aft end of the cockpit. Although this makes good seating in port, we doubt that you’d want anyone sitting there under sail: too much weight in the end of the boat. It does make a natural helmsman’s seat for wheel steering.The engine controls and instrument panel are also located at the aft end of the cockpit, and are basically inaccessible to the helmsman of a tiller-steered version.There are two lifting lids in the aft cockpit bench, giving access to a cavernous space under the cockpit. To be useful, dacron bags should be fitted to the inside of these lockers. Then, they’ll be handy stowage for spare sheets and blocks.There are comfortable contoured seats along each side of the cockpit, with a huge locker under the port seat. Although plywood pen boards somewhat separate this locker from the engine space under the cockpit, it would be far too easy for deeply piled junk to get knocked over the board and into the engine. This locker should be partitioned into smaller spaces unless it is to be used exclusively as a sail locker.The battery boxes, fitted at the forward end of the locker, could benefit from plywood or fiberglass lids to keep battery acid off gear which might find its way onto the batteries. The box is designed to take two batteries—one battery is standard—stored in plastic containers. A single lid covering the whole box would be more efficient.The huge cockpit will accommodate up to six for sailing, and eight for in-port partying. The cockpit seat bottoms are contoured, and the cockpit coamings slope outboard for more comfortable seating. However, the seats are both too narrow and too short for sleeping.The forward end of the cockpit is protected by a narrow bridgedeck. However, the cockpit coatings extend a full foot above the level of the bridgedeck, To block the companionway to the level of the top of the coamings will require leaving two of the three drop boards in place when sailing.Although there is moderate taper to the sides of the companionway, making it easier to remove the drop boards, it is still necessary to lift each board about five inches before it can be removed. This is far safer than many tapered companionways, where boards practically fall out if you look at them wrong. The companionway slide is one of the best we’ve seen. It’s a contoured piece of acrylic fitted with a convenient grabrail. It slides easily in extruded aluminum channels, and is fitted with a fiberglass storm hood. As on many boats, the aft cabin bulkhead slopes forward, rendering it impossible to leave the drop boards out for ventilation when it rains.BelowdecksOwners consistently praise the interior design and finishing of S2 sailboats. From looking at the 8.5, it’s pretty easy to see why.There are no exposed interior fiberglass surfaces except the head floor pan molding. The hull and cabin overhead are lined with a carpet-like synthetic fabric. While this will undoubtedly cut down on condensation, we at first wondered how this fabric would hold up over time. Inevitably, the hull liner and even the overhead will get wet. In freshwater areas, this is no problem. The water will eventually evaporate. In salt water, however, wet fabric never seems to dry. Salt draws moisture like a magnet draws steel. Since first seeing this boat, however, we’ve had good experiences with the fabric. Be sure, however, to get a good wet-or-dry vacuum to keep it clean.Interior layout is fairly conventional, with Vberths forward, and immediately aft, a full width head. The head can be closed off from both the forward cabin and the main cabin with solid doors—a real luxury in a boat this size. There is a large hanging locker in the head, and reasonable storage space for toilet articles.The word for the main cabin is “wide,” with the settees pushed as far outboard as they can go. Décor is a little heavy on the teak for our taste, but it is one of the better coordinated interiors we have seen. S2 had a good interior decorator.A fold-down dining table seats four. When folded against the bulkhead, it is held in place by a single latch, which makes us nervous.Neither settee is full length. The foot of the port settee runs under the galley counter, making it long enough for sleeping, although your feet may feel a little claustrophobic in the tiny footwell.The starboard settee is an unusual configuration. The aftermost 12" of the settee folds up to form an arm rest, leaving a gap between the end of the settee and the head of the quarterberth.Inexplicably, this gap is referred to on the accommodation plan as a “charting area,” although there is neither a standard nor an optional chart table. It’s sort of like the designer ran out of energy before completing the interior design.Over the non-existent “charting area” is the best electrical panel we’ve seen on a 28 foot boat. The panel has a locking battery switch, battery test meter, and a panel with room for 14 circuit breakers, although only half are installed on the standard boat.The space is welcome, since with the proliferation of marine electronics most electrical panels are woefully inadequate.Most quarterberths tend to induce claustrophobia. That of the 8.5 is more likely to exacerbate any tendencies you might have to agoraphobia. At last, a quarterberth which will not give you a concussion when you sit bolt upright in the middle of the night after your neighbor drags down on you in a wind shift.The standard main cabin sole is carpet-covered fiberglass. For an additional $325, teak and holly was available for the traditionalist. We’d want it. Unfortunately there is no access to the bilge in the main cabin. None. This is inexcusable, and could be dangerous. A few hours with a saber saw should solve this rather basic problem.The galley is workable and accessible, with no awkward posturing required to do the dishes. The sink gets an A+. It is a full nine inches deep, is large enough to take a frying pan, and mounted close to the centerline.In contrast, the icebox gets a C-. It is larger than normal on a boat of this size, but it drains to the bilge, has a poorly insulated top, and a tiny, uninsulated hatch without a trace of a gasket. Boo.Because of limited counter space, the two burner Kenyon alcohol stove is mounted athwartships, rather than fore and aft. This means that the stove cannot be gimballed, and that it is necessary to reach across the inboard burner to reach the outboard one. Given the fact that countertop gimballed stoves are usually dangerous, the lack of gimballing doesn’t bother us much. What does bother us is that if you want to upgrade the stove to something more functional, the limited space allocated will stretch your ingenuity.A fold down table at the end of the galley counter gives additional counter space, but it must be left up in order to use the port settee for sleeping.Roominess, excellent execution, and good color coordination are trademarks of the interiors of all S2s, and the 8.5 fits well into this enviable tradition.ConclusionsThe S2 8.5 is a good boat for cruising the Great Lakes or any coast in comfort and a certain amount of style. Her appearance may be a little modern for traditionalists, with her straight sheer and European-style cabin windows.Pricey? Yes, but when you look at the things that go into the boat—the rig, good sails, and a comfortable, well finished interior—the price may seem a bit less painful. You still pay for what you get.

1996 Hunter 336 sailboat great project boat

Panama City, Florida

Make Hunter

Story of the Kathryn Ann...I bought this boat in 2004 off of eBay from an insurance website that sells boats that have been damaged. In this particular case, Hurricane Isabelle ran up the eastern coast and hit the marina this boat was stored at in Maryland, in which the waves beat the boat on the starboard side into the dock piling resulting in damage to the side of the boat and the interior walls of the bathroom (opposite side of the hull damage). I had the boat shipped to me in Panama City, FL where I started the rebuild. Upon arrival of the boat, I took everything out of it and rinsed it all down. I could tell that water had entered the boat and looked as if it had rolled over to its starboard side down in the water a bit because I could see the water line marks. The boat was in fresh water, but where the storm churned up the water, there was a blanket of dirt in the part of the cabin from the water intrusion. Everything cleaned up pretty well except the wood from the water line down was stained. I took the motor out, which is a Yanmar 3GM30F, and had a diesel mechanic go through it and luckily no water got in the engine and it has ran like a top since I have had it. I repaired the hull with the best glass and resins from RAKA in south Florida, never had any problems since the repair. Once I finished up the hull repair, I went ahead and put it in the water to start enjoying it with the intentions of working on it on the weekends to finish it up. Unfortunately not long after putting the boat in the water, I got orders to be stationed in Colorado (Air Force guy) where there is little water! I have been trying to get back to Panama City every since with no luck. So I would come down a couple times a year to try to complete the finish work, but never seemed to get it completed because I would rather take it out with the boys and have fun instead of work on it! As much as it kills me, I need to let her go so that the next person can finish what I started and bring her back to her ol' glory, plus my family never got into it like I hoped, it's a great boat that needs to be used. I'll try my best to describe what still needs to be done...I have rewired most of the DC, never messed with the AC for the simple fact that I didn't have a hook-up available, so that will need to be gone through, the key switch on the operator panel needs to be replaced, I have a lot of new line, but some will still need to be replaced, the anchor light on top of the mast needs replacing, the teak needs to be cleaned and re oiled, there are some pieces that will need to be replaced, the cushions in the front cabin have some water damage (see pic), I have some extra material to do this, but would recommend something a little less 1980s in there. There is a little tear in one of the seat cushions, see pic. Need fuel gauge put in, have one on the boat, just not installed yet. Needs new instruments (speed/depth) possibly just transducer, I used a friends electronics when I took it out for depths. The bathroom needs to be finished, everything works, just needs finishing. Starboard side bumper over repair needs securing. I used the propane system for the stove 5-6 yrs ago, but would recommend going through that to make sure everything checks out. All the stainless needs polishing. Needs bottom paint. A couple of the deck poles need the base rewelded and resealed to the boat, that is where some of the water leaked in the boat over the years. There are some chips in the gelcoat on the rear right side (top deck) from something pecking on it, some gelcoat cracks from age, nothing major, aesthetic stuff. There may be a few more things here and there like screws that need replaced or line, but to the best of my knowledge, that's about it. This is a great buy for a Father/son deal to teach your kids the ins and outs of a sailboat without spending a huge chunk of cash, plus not worry about the kid dinking up a big money boat. Or great for a person to take to the keys or the beaches of the Gulf. Good Luck...hit me up with any questions! I've tried to describe this the best I can, this is not a new boat, so please don't expect one. The boat is sold as-is...where is, come get it! Thanks for looking!

Miami, Florida

1985 Canadian Sailcraft CS 30 Sailboat

Toronto, Ontario

Make Canadian Sailcraft

Model CS 30

Length 30.0

1985 CS 30 - Asking $35,000 Hull #4401deep fin 5'-6" draft30' LOA10'-3" beam Hull: - White topsides and white deck with darkblue boot stripe.- The bottom has layers of VC tar with yearly coats of VC17m anti fouling paint. Engine: - 18hp Volvo 2002 (very clean)- Racor Fuel Filter- 2 bladed fixed prop Ventillation: - 7 opening ports- 3 opening hatches (lewmar)- 1 day-night ventilator Bilge: - Automatic/manual switch-rule 500 gpm bilge pump- Manual bilge pump, emergency bilge pump thru engine intake Electrical: - 2003 True Charge 10-amp charger- 2 x 12 volt house batteries (220 amp)- new bow light- new steaming/fore deck light- voltmeter- 50 feet shore power cable Cabin: - Standard CS30 Layout- 6'-2" headroom- v berth, dry locker, head, settee,nav station and quarter berth- Teak and holly floor (refinished 2004)- two burner propane stove with oven. Instruments: - Depth and knot log- Autohelm 4000- Standard Horizon Intrepid VHF with RAM mic- Pioneer am/fm/CD with tow speakers- Magellan 315 GPS Sails:- North sail main with one reef and Furling Genoa 2006- Main sail cover 2006- North #3 storm jib- North cruising spinnaker with hoisting sock and whisker pole- Sheets, turning blocks, adjustable baby stay, furler, deployable lazy jacks- All lines to cockpit with 8 clutches- 2 Lewmar 2-speed ST44 primaries- 2 Lewmar 2-speed ST30 secondaries. All halyards and sheets 2003. New Additions: - Ice box converted to NOVAL KOOL refrigerator 2007- New boom added 2012- Back stay adjuster replaced 2014 Misc: - custom cockpit cushions- doger, cockpit shade, teak flagpole, barometer and clock- 25 lb CQR with chain and 250' rope , lunch anchor- cockpit table- Force 10 BBQ- Stern rail seats- heel level indicator- bow seat, folding cradle- Winter frame Includes owners manual for boat and gear. Well cared for ... its time for someone else to enjoy her. Docked in Toronto ,Ontario, Canada

1985 Tartan MKII 34, sailboat / Located In Stamford CT

Stamford, Connecticut

Make Tartan

Boat Name Rose Clair Cell #1 917-582-3435 Cell #2 917-363-0541 Rose Clair is a well maintained example of this classic Sparkman and Stevens designed Tartan 34 MKII This Tartan 34 has been primarily used for cruising around the Long Island Sound. In addition the Tartan 34 MKII model has won many distance races including the rugged Mackinac race and has also won high point in her class. The 34MKII is truly a high performance cruiser. If you are looking a great Racer Cruiser then be sure to take a look at this beautiful sloop. This Boat is Located in Stamford and is currently in the water / winter storage. She is covered and is available for viewing now. Storage is paid in full till 04/01/2017 Recent Upgrades Canvas and frame all new 2015 Sunbrella Canvas Mainsail Cover Dodger with side rails Bimini Dimensions LOA: 34 ft 4 in LWL: 28 ft 8 in Minimum Draft: 4 ft 5 in Displacement: 11000 lbs Engines Total Power: 24 HP Total Hours 800 Engine 1: Engine Brand: Universal Engine Model: 25M Engine Type: Inboard Engine/Fuel Type: Diesel Drive Type: Direct Drive Transmission: Hurth (new 2015) Tanks Fresh Water Tanks: 2 (57 Gallons) Fuel Tanks: 1 (23 Gallons) Holding Tanks: 1 (24 Gallons) Accommodations: The Tartan 34 MKII has accommodations for 6 people: Private forward cabin with "V" berth Enclosed head to starboard, with vanity, sink and Shower Hanging locker and drawers opposite Main salon amidships has settee to starboard which converts to double berth Single settee to port with plenty of storage Hinged bulkhead-mounted teak table w/bookcase behind Galley to starboard Nav station to port, with lift-top chart table Double quarter berth aft with storage Galley Single Stainless Steel Sink storage under Foot pump fro sea water and hot/cold water faucet Force 10 Burner Nat Gas. stove w/oven Hot Water heater (new 2015) and hot/cold pressure water system Top loading ice box Plenty of storage above & outboard in locker & drawers Sails and Rigging Full Batten main 130 Genoa on Harken furler Asymmetrical spinnaker with sock Spars and Rigging Coated Aluminum mast with two spreaders Coated Aluminum Boom Forespar Boom Vang Head Enclosed head (bifold doors) Single stainless sink with Hot/cold water faucet/shower. Holding Tank with Deck Pump-Out Mechanical and Systems Cockpit Wheel steering with Simrad autopilot and remote. Electric & manual bilge pumps Electronics and Navigation Gear Speed/Depth transducers VHF Radio with DSC and GPS Recent Upgrades Canvas and frame all new 2015 Sunbrella Canvas Mainsail Cover Dodger with side rails Bimini

Sailboat 29 feet, 1984 Hughes Columbia 8.7 meter

East Tawas, Michigan

Make Hughes Columbia

Length 29.0

Well maintained cruiser with AirForce off shore main with 2 reefs, Genoa roller headsail, cruising chute/spinnaker. Canvas includes dodger sun awning, sail cover. Full screens for companion way and forward hatch. Marine head 12 gallon holding tank and wash basin. Coast Guard Safety gear, jackets, flares/flare gun, horse shoe ring. Unicom VHF radio with DSC capability, 2500w inverter, 110 shore power with cord, two 12lb Danforth anchors, standard horizon GPS chart plotter, depth sounder, Azimuth electron compass, Autohelm 3000 auto pilot. Teak interior, V-berth, port bunk pulls out to double bed, single starboard bunk. Drop down table with attached leaf. Hanging locker and under-bunk storage and galley storage. Brass barometer and ship's clock as well as gimbaled brass kerosene lantern on bulkhead. 5,000 BTU carry-on air con fits in forward hatch, complete with cord, hatch hood, drain pipe. Galley has hot and cold pressure water with 12 volt or shore hookup, 13 gal fresh water holding, 12 volt cold plate refrigerator. Two burner Coleman portable propane stove. Includes dock lines and fenders.

Irwin 65' Ketch Sailboat - great fiberglass liveaboard or cruising yacht

Emeryville, California

Please read the add completely before responding. This boat has a lot of potential but, IT NEEDS WORK! Boat is currently located in San Francisco, CA and for sale for a limited time only. I'm just putting feelers out there to see what the possibilities are for selling this boat by the end of the month. So, if you don't have cash and aren't in a position to close a sale within the next couple weeks please don't waste either of our time. The good, the engine was replaced about 5 years ago with a brand new Perkins 130hp 6-354. It had extensive upgrades made within the last couple years including a new hydraulic autopilot, raymarine radar and color chart plotter, new main breaker panel, most interior lights have been replaced, it has 3-210 watt solar panels, new bilge pumps, new batteries and inverter/charger, new vhf, stereo and speakers, new force 10 propane range, new fresh water pump and holding tank with macerator, new anchor & rhode and 11'6" RIB. I put the hard dodger/pilot house on last year, it is actually only half finished based on my intentions but it is 100% waterproof and serviceable as it is. It is plywood with fiberglass inside and out, I had intended on putting another layer of plywood and fiberglass on the outside. The bad, it has been neglected over the years and the former owner let it get away from him. There is some soft wood in the interior some of which has been removed as I started to replace it and insulate the boat better. The exterior paint is faded with some scuffs and needs to be repainted, the sails are serviceable but the main is undersized as it was bought used, there are also a few soft spots in the core of the aft deck. That being said I sailed the boat 7000 miles 2 years ago from South Carolina through the Panama Canal and up the West Coast to San Francisco and then another 2000 miles up to Seattle and back with few issues. If you want to get more details and the specs I would recommend visiting Yachtworld.com and search for Irwin 65's the specs are all pretty much the same. This boat does have an 8'-8'6" draft as it has the blue water keel configuration. The boat sails great and is very fast. I would possibly consider a partial trade (up to 50% of sale price) for a smaller ocean worthy sailboat in the 35' to 50' range, it needs to be in pretty good shape as I don't have a lot of time to put into it. I would also consider these specific smaller boats, a flicka 20 or dana 24. A diesel pusher motor home or diesel pickup and fifth wheel trailer combination. I will absolutely not deal with any brokers, so brokers please don't waste mine or your time. I hate to sell this boat as it is my dream boat and I had big plans for it but my life has changed and I don't have the time to put into it. If you are serious and want a big boat at a great price, have your cash ready and let's talk. I would also consider delivering it anywhere on the west coast for the right offer.

1985 Tartan MKII 34, sailboat / Located In Stamford CT / Original Owner

2001 J46 sailboat sail boat J-46 sailing cruiser racing fresh water. UPGRADES!

Charlevoix, Michigan

Make J Boats

Length 46.0

Beautiful, generously equipped and meticulously cared for freshwater J46 owned by senior couple. Used only for day sailing and minimal light cruising in northern Lake Michigan, Lake Huron and Lake Charlevoix for only 12 four month seasons (was not launched in 2012 and 2013). Always kept in inside heated storage when not in the water for the four month summer season. It is in pristine condition. J/46 may be the only investment grade sailing yacht of its size not requiring professional crew to sail at designed performance levels…..or to maintain. Two people can easily manage her upwind and down to achieve the same 8 knot passage-making speeds under sail that is possible when motoring with 76hp diesel auxiliary. The joy of sailing the perfect boat is, after all, a goal we believe every owner ultimately seeks. To insure that good sailing days are spent sailing rather than scrubbing and varnishing, J/46 is designed to be virtually maintenance-free. Her exquisite joinerwork is protected from the sun……below decks where it’s beauty can be preserved More photos available in this link: https://docs.google.com/document/d/1QEllizB6x4FKTe3kGwlbjYaLgJMrQEg8x6PdVtIa14Y/pub Factory Options: Refrigeration Package: -Seafrost Mechanical Refrigeration.-Additional Plates & controls for Freezer.-Supplementary 110VAC Shore power Assist. Supplementary Power Package: -Additional 210 amp Lifeline AGM Battery for total of 630 amps for house banks (location is in lieu of nav station bottom drawer).-Heart Freedom 25 Inverter/Charger (in lieu of std ProMariner 30-3 charger).-Heart Echo Charger (to service engine start battery through AC system).-Heart Link 2000 Battery Monitor (for (2) house battery banks).-Heart Link 10 Battery Monitor (for engine battery). Supplementary Plumbing Package: -Vacuflush Forward Head.-Dockside Water Inlet.-Seagull Water Purifier in Galley. Cruising Accessory Package: -Cockpit table.-Companionway Screens Additional Single Options: -ESPAR Diesel cabin heater.-Lewmar 64 CEST Power Primary Winches.-Bolstered Ultra Suede Cushions.-Radar Mast thru deck.-Microwave in galley.-Harken adjustable Genoa car leads.-Rubrail over cove stripe-28” High Pulpits & Stanchions in lieu of std height.-Sea water wash down pump w/faucet in anchor locker.-Hall Spars Windex.-Hall Spars “NO STRIKE’ lightning dissipater.-Hall Spars GAM antenna & cable.-Hall Spars painted carbon fiber whisker pole.-Hall Spar Whisker Pole Track and Car.-Hall Spars 3rd folding mast step.-Hall spars Dutchman mast sheave.-Hall spars Dutchman Halyard.-Flag Halyard & Hardware.- S. S. Turnbuckle Covers (6).-Cockpit Full Glass and Screen Enclosure.-Dodger to Bimini Insert.-Helm Pedestal Cover.-S. S. Grab Rail along aft edge of Dodger.-S. S. Grab Rails port & starboard on Dodger sides.-S. S. Dodger & Bimini supports in lieu of straps.-S. S. Bimini handrails port & starboard.-Power engine oil pump-out system.-Max Prop 3 Blade Feathering Propeller.-Dripless shaft seal.-Memory foam mattress in forward cabin in lieu of std.-Second custom V birth insert for additional standing room.-19” HD flat panel TV and small DVR.-2nd bottom refrigerator door.-Alpine stereo AM/FM w/6 disc CD player & Bose Marine cockpit speakers.-Weems & Plath Brass Ships Clock.-Weems & Plath Brass Barometer.-Variable Speed Cabin fans fore and aft cabins and main salon.-Prime bottom plus VC-TAR plus 2 coats VC-17 anti-fouling paint.-Awlgrip Hull Flag Blue w/Red Boot Stripes.-Patriot American Flag Graphics. Sail Package (Quantum): -Kevlar/Mylar/Dacron Tri Radial Cut full Batten Main & 135% Genoa.-MC6000 105% Cruising Jib.-Antal Mast Cars.-Dutchman Flaking System.-Asymetrical Spinnaker w/deployment bag.-Antal spinnaker Snuffer.-Harken Mark II Roller Furling System. B & G Hydra 2000 Navigator Pack: -Navigator Pack, Hydra 2000, Type 2.-Standard Full Function Display Pack, Hydra 2000.-20/20 Display Pack, Hydra, Green Backlight.-20/20 Display Pack, Hydra, Red Backlight.-Depth Sensor with Bronze Flush Mount Hull Housing.-Speed Sensor with Bronze flush Mount Hull Housing.-Analog display Pack, Apparent Wind Angle, 360 degrees w/cable.-Linear Rudder Position Sensor Pack, w/installation kit for Type 2 Ram.-Pilot Ram Drive Pack, Type 2 w/cables (12Vdc, adjustable rose joint).-Cable, 213 Mast w/bkt, 80ft.-Pin, Quick Release, Pilot.-Edson J46 Tiller Arm. Raytheon Radar/Chart Plotter and Accessories: -Upper Station – 7”Color LCD Pathfinder Radar w/Raychart and 24” 4kw Raydome.-WAAS GPS Antenna.-Cmap NT Northern Michigan.-Cmap NT Lake Huron and North Channel.-Radar Cable Connector (Radar Mast Base).-Edson 3-1/2” Deluxe Mast 144”.-Edson Adapter.-Edson Radar Platform, Deluxe.-Edson Long Antenna Bracket-Starboard and Port.-Edson 28” Antenna Hoop.-Edson 13” Antenna Extension (GPS antenna mount).-Shakespear TV Antenna 2030-G. Communications Options: -ICOM M502 VHF w/ Optional Cockpit HM-127 Remote-12 Volt Pedestal Outlet-Telephone and TV cable cockpit to nav station Safety Equipment: 2 Sospenders inflatable PFD w/harness, lanyard & rearm kit1 Crewfit inflatable PFD w/harness lanyard & rearm kit2 Regular PFD w/harness & lanyard4 Regular PFD6 Throwable floatation cushions2 Jack Lines 45 ft port & starboardI Radar reflector1 Bosun chair1 Throwable Life Sling1 deployable auto inflatable Life Saver Buoy4 Fire extinguishers – various types1 Submersible Hand Held HX460S VHF Marine Transceiver w/ barometer sensor1 Throwable Rescue Line Bag1 Avon 48lb Inflatable dinghy w/ Poly pro towing line, bridle & elect pump – fits in aft cockpit locker1 Honda 2hp 4 cycle dinghy motor & aft pulpit motor mount1 Winslow 6 person Super-Light Offshore Life Raft w/ SEP packed Survival Supplies Inflatable insulated double floor Heavy duty TriPod Arch tubes w/canopySpare parts: water pump impeller, 2 Racor fuel filtersVarious sizes of tapered wood emergency thru hull plugs 1 Handheld compass1 backup Yeoman digitized chart plotter with hand-held Magellan GPSVarious rescue flares as required by Coast GuardLakes Michigan, Huron and North Channel Charts Ground Tackle: 1 44lb Spade anchor w/swivel shackle, 25ft high test 3/8” chain and 250ft 5/8” rode1 Fortress Fx-37 Alum. Anchor w/ 15ft 5/16” chain & 200ft 5/8” rode in deployable anchor bag 250ft 5/8” Line for on-shore anchoring Dock Lines & Bumpers: 3 Taylormade bumpers w/blue covers6 Yale Red Colorline braided 5/8”x40ft dock lines w/Perma Buoy chafe guards Shore Power: 1 50ft 50 amp power cable1 60ft 30 amp power cable1 Adapter 50 amp to 30 amp Maintenance equipment: 1 Universal Pole w/boat hook, 2 brush heads & curve end1 50ft water hose Note: All 4 house batteries and the engine starting battery replaced May 2015 with Lifeline AGM (house) and Optimus (engine) batteries. J/46 Specifications Hull & Deck SCRIMpTM infusion molded sandwich construction using triaxial, biaxial and unidirectional glass reinforcements with Lloyd's and ABS approved end-grained balsa core. (SCRIMpTM is the patented resin infusion molding process of TPI Technologies, Inc.)TPI transferable ten yearwarranty against hull blisters. Interplastic vinylester resin on the outer hull layer.Lead & antimony fixed 9,350 lb., 6.2' draft, and fin/bulb keel bolted to a deep molded stub.White (other light colors are optional) Gel Coat hull with double tapered bootstripe and molded indented cove stripe. White gelcoat deck with choice of five non-skid colors in tones of white, gray and beige.HUIl-to-deck joint bond,ed with 3M 5200 and Plexus MASSO on the transom, side decks are covered with a thru-bolted clear anodized aluminum toe-rail.Two lazarette lockers on fantail, port cockpit seat locker and port utility locker for helmsperson outboard of wheel. Propane locker outboard of wheel to starboard drained and vented overboard with two 10lb aluminum bottles. Molded instrument pods on port and starboard coamings and on wheel pedestal.Molded companionway seahood with integral instrument pod.(3) Oorade boxes molded integrally into deck for ventilating owner cabin, main cabin and forward head area.Molded swim platform with off-center gate and fold-up ladder.Gasketed bow anchor locker and spinnaker storage area with overboard drain.316 stainless handrails on cabin trunk (4) total.GRP molded main structural bulkhead, glassed fore & aft on hull and deck as support for shroud chainplates with single door opening to v-berth cabin.Heavy duty molded structural keel support grid including engine bed, mast step, and longitudinal stiffeners. Fabricated aluminum mast step and engine bed tapping plates molded into structural keel grid.Positive traction nonskid on horizontal deck surfaces. Propulsion & Steering Yanmar 4JH-TE turbq-charged 76 hp, 4 cylinder, diesel engine with fresh water-cooling, dual R~cor fuel filters and 150 amp alternator.Yanmar C-type recessed engine instrument panel in cockpit with Acrylic cover including gauges for tachometer, fuel level, operating hour meter, fresh water temperature, amperage, oil pressure and oil temperature. Morse-type control gear shift and throttle mounted on pedestal.Parallel fuel system with 60 gallons in primary tank below the aft starboard berth, and 30 gallons in secondary tank behind aft bulkhead to starboard. Secondary tank gravity feeds into primary for 90 gallon total capacity.Two blade 20" Max Prop with 1..25" Aquamet shaft.AquaOrive self-aligning thrust bearing to minimize shaft vibration.Ultra Sound Acoustics VO-1 00 insulation in engine compartment.Balanced spade rudder constructed with unidirectional glass and large diameter shaft mounted in Harken composite rudder bearing to exceed ABS requirements.Aluminum emergency tiller.Edson 60" diamond series aluminum wheel with leather grip.Custom molded pedestal with guard and integral binnacle, 5" Ritchie compass, 9" x 12" instrurnent mounting area & Edson thru-shaft wheel brake.(2) Teak helm-station foot braces. Interior Satin varnished cherry bulkheads and furniture panels with cold molded cherry trim, drawer and cabinet faces. Main bulkhead with single opening and recessed cherry paneled door with Mobella lock-sets. Forward and aft heads trimmed in teak.Cherry trimmed vinyl headliner throughout forward, main and aft cabins. Polyurethane teak & holly veneer floor panels with underside and end-grain sealed with epoxy.Choice of interior cushion fabric colors. (ultra-suede or ultra-leather options available)5" layered & bolstered main settee split wrap-around cushions with two-tier split backrests. 4" foam cushions in fwd and aft cabins. Large twin berth forward cabin featuring 4 drawers, 4 lockers, hinge-up bunk tops to maximize storage; hinged V-berth filler; changing seat, hanging locker w/louvered door, and bureau/vanity with 2 drawers. locker. and cabinet above with cherry louvered doors & shelf.Forward head includes vanity with mirrored acrylic slider storage, teak towel rack, mirror storage cabinet below molded sink, enclosed by cherry paneled door (on outer face) and white laminate finish on head side.Stall shower with teak slat bench seat, cabinet locker with mid-height shelf outboard, shower fixture mounted on bulkhead with adjustable shower faucet. Local self-priming pump services shower sump and drains overboard.Pilot berth in main cabin to port with small mid-height convenience shelf at aft end.Two storage cabinets with 'Iouvered doors to ~ccommodate main cabin entertainment center above starboard settee. (2) Book storage shelves between cabinets with removable cherry retainer battens.One large drawer and one locker outboard of starboard settee backrest cushions.Settee backrests of cherry veneer and cherry trim.Varnished cherry wood hull slats in main, aft and V-berth cabins.Cherry main cabin drop-leaf table with removable fiddles, two drawers and internal bottle storage.Large 30 x36 sit-down. forward-facing navigation station with hinged tabletop. Features include; outboard shelf, access to chart storage and sliding organizer tray below table top, cushioned seat of layered bolstered foam. instrument cabinet with (2) large wood panel faces hinged at the bottom for quick access, file storage drawer below nav seat to fit hanging files, binocular & misc. storage cabinet outboard of seat, and series of three utility drawers on inboard tabie support face.Starboard aft cabin with recessed cherry paneled door, hanging locker with louvered door and bureau/vanity with 2 large drawers. hinged footlocker, and cabinet with cherry louvered door & shelf. Additional drawer above engine.Aft head/shower combination accessed via cherry paneled door. wet hanging area outboard. cabinet below molded sink, mirror, (2) teak grab rails and direct access door to lazarette locker area equipped with fore and aft divider. Teak companionway steps cold molded with angled ends & Treadmaster non-skid for safe entrance and exit. Cherry overhead grab rails in main cabin.All drawers and cabinets with polished positive-latch push buttons. Galley "Wheat Matrix" Fountainhead color for counter tops with cold-molded varnished & tapered cherry fiddles.Scandvik polished 8" deep SS double sink recessed below Fountainhead on forward island with deluxe hot/cold pressure-water gooseneck faucet and manual fresh water faucet with whale foot pump. Storage areas in louvered doors below sink for cleaning supplies and garbage pail with flip lid access.6.5 cu.!!. Deluxe icebox located on center island. Features include molded GRP box insulated with Glacier Bay Ultra R vacuum insulation panels and foam top. Organizing shelves & interior light included.3.5 cu.!!. ice box, convertible to optional freezer, located outboard of sink. Featuring molded GRP box with 3-1/2" foam insulation and mounting space for refrigeration cold plates.Three-burner Force 10 propane stove/broiler/oven with thermostat control, patented slide-away oven door recess and S.S. stove bar. Additional storage foot locker below oven.Plate, bowl, cup, and glass storage compartment on bulkhead att of stove.Top access dry good storage compartment below counter top directly outboard of sink.(3) Large cabinets mounted outboard and covered by three louvered cherry doors. Aft two cabinets installed with mid-height shelves. (Optional Microwave replaces middle cabinet door and area).Dual slider cabinet, bin storag8. and AC outlet mounted below cabinets. Flatware drawer, utensil drawer and utility cabinet with mid-height shelf and louvered door under outboard counter. Sink-top cutting-board.Stainless grab post on forward inboard galley corner. Plumbing Hot & cold pressure water system with 12-gallon hot water tank and accumulator tank. Service to (2) heads, forwa~d shower, galley, & swim platform shower.Self-priming direct sump pumps for showers draining into seacocks.Automatic bilge pump with float switch and dedicated panel in nav station wired direct to DC system. 120 gallons total water capacity in (2) custom molded tanks complete with baffles, inspection ports, and secured in place below main cabin settee berths.Raritan PH-2 heads with holding tanks. Overboard "Y"- valve offshore discharge and holding tank pump out systems. Two manually operated bilge pumps, one mounted in the cockpit and another in aft head with hose to reach bilge. (ORC category 2). Electrical Standard system batteries include: (1) group 40 (210 amp) and (2) group 31 (105amp) deep cycle batteries to serve the house, and (1) Optima 1000 (1,100 CCA) battery for dedicated service to the engine. All batteries are Concorde's Lifeline AGM sealed, absorbed glass mat type series.ProMariner ProMatic 30-3 Battery Charger. Balmar 91-150 Alternator and Max Charge external regulator with temperature sensor for altemator.BattJMaxx Automatic Battery System with remote momentary parallel switch near cockpit engine panel. .Master battery switch at n~l.Vstation with 1,2,Both,Off for House batteries and single On/Off switch for engine start battery.Deluxe Bass AC/DC backlit electrical panel w/digital condition meters, circuit breakers, accommodation for optional generator installation and air conditioning systems. Panel accommodates 33 DC breakers (24 occupied w/two spare standard) and 11 AC breakers (9 standard).Navigation, steaming/foredeck, anchor and tri-color masthead lights.50 amp 11OVAC shorepower system with 6 outlets, 50ft shore power cord and Guest galvanic isolator.Bonding system to meet ABYC project E-1.Propane solenoid switch panel in galley.Ten swiveling Imtra stainless halogen reading lamps, halogen overhead lights in main cabin, flexible armed lamp at navigation station, two florescent lights, one in each head.Four Hella variable speed cabin fans over berths. Deck Hardware (2) Lewmar 64CCST self-tailing 2-speed all chrome primary winches with gear ratio of 3.1: 1 in 1 gear and power ratio of 64:1 in 2nd gear located in recessed bases on cockpit coamings. "'(2) Lewmar 54CCST self-tailing 2-speed all-chrome halyard/reef/spinnaker secondary winches on cabin trunk.(2) Lewmar 48CCST self-tailing 2-speed all-chrome mainsheet winches outboard of traveler in recessed bases. (3) Lock-in Harken Speed-Grip 10" winch handles, (2) 8" Speed-Grip handles for mainsheet. Four cockpit mounted PVC winch handle holdersThurston cockpit dodger with roll-up forward window, removable side curtains, stanchion supports and stainless grab bar on aft edge.Thurston deluxe helmsman bimini with stanchion supports & viewing window (same color as dodger).Five white acrylic cockpit cushions for helmsman and cockpit seats.(2) Harken Black Magic 3010 (1OOmm) footblocks for genoa sheets when using dodger, mounted on cockpit coamings aft of primary winctTes. (2) Harken Black Magic 3006 (75mm) double footblocks with lock-off outboard of the primaries for spinnaker sheets and checkstays.(2) Harken Black Magic 3005 (75mm) mainsheet foot blocks wllockoffs mounted on angled pads at winches.2:1 Mainsheet system consisting of (2) Harken 1969 AirBlocks (75mm) mounted on traveler and (1) 3007 AirBlock (100mm) attached to boom bale. Harken 560-S Big Boat mainsheet traveler track with Harken 1939/1935 car w/control blocks for 6:1 purchase led to both sides of cockpit to 1893 track control ends through cockpit side mounted 222 blocks to 150 cam cleats. (2) 168 swivel blocks to adjust traveler from forward or aft side of track.Single rope clutchmounted in cockpit for heads ail furling. Lewmar Concept 2 anchor windlass system with #203 ropelchain gypsy, manual override, 1S0 amp breaker in nav station, hand held control unit mounted in forward deck anchor locker. Gypsy requires 3/8" ACCO G40 or G80 chain and S/8" braided rope.Custom 316 stainless mast collar with 10 bales for halyard and reef lines and forward halyard bar. (9) Schaefer 08-0S stainless halyard and reef blocks wlinvestment cast shackles.(4) Lewmar Superlock double rope clutches, mounted in pairs forward of each secondary winch.(2) Harken 1969 (7Smm) AirBlocks shackled to U-bolts at transom corners for mainsail checkstays.(2) Harken 1969 (75mm) AirBlocks shackled to U-bolts aft on toerail for spinnaker sheets.(2) Clear anodized aluminum "T" tracks (13' x 1.25") for jib/genoa leads. Additional 3' x 1.2S" track mounted outboard of1 00% jib position for outboard lead.(2) Schaefer 32-33UC screw-pin type jib/genoa lead blocks.(2) Schaefer OS-99 snatch blocks for spinnaker twingslor outboard jib/genoa leads.(2) Stainless t-track slider cars.Asymmetric.spinnaker deck gear including: (2) Harken 1969 (75mffi1 Airblocks mounted on "U" bolts near sternpulpit and (1) 1969 75mm AirBlock mounted on anchor roller.White molded flagstaff mounted in 316 SS deck socket on aft deck edge close to centerline with 4 x 6 American flag. aRC Bow pulpit of 316 SS with double rail offshore navigation lights and forward gate.aRC Stern rails of 316 SS w/2 rail split design including a stern boarding gate to starboard and stern light. Tapered 316 SS lifeline stanchions with SS bases mounted to toe rail.Double lifelines heights to meet ORC standards with boarding gates to P&S using Gibb hooks.Padded Sunbrella lifeline covers for each lifeline outboard of helmsman's station w/color to match dodger & bimini. Two 10" bow cleats, two 8" stern cleats, two 8" amidships cleats.Custom designed 316 SS bow roller/stem~ead to accommodate Simpson-Lawrence Delta 35,45 & COR 35,45 and Bruce 45 anchors. (Optional removable anchor roller to port)Seven Lewmar Ocean series articulated, bronze tinted ac,ylic hatches: size 70 on foredeck, size 60 in main cabin, (4) size 12 over forward cabin, aft cabin, shower, and head and (1) size 10 in aft head.White framed Bomar opening ports w/screen~ in cabin trunk and in cockpit walls for aft quarter cabin and head. Acrylic companionway hatch and two-part acrylic offshore drop-boards with inside/outside opening, lockable hasp. Four 12x20 and two 12x24 poly mesh line bags, one foredeck double line-bag. .(4) Vetus 4" dorade cowl ventilators to service forward cabin and head and main cabin. Removable stainless guards for forward dorades.316 SS swim ladder with gray PVC treads mounted on swim platform. SS step with PVC tread mounted on transom. Spars & Rigging Hall Spars carbon fiber mast of pre-preg carbon fiber autoclaved at 80 PSI at 250 deg F. Mast includes double airfoil carbon spreaders, carbon gooseneck, Awlgrip off-white finish, painted black bands, wire runs in conduit, Hall/Antal mainsailJrack with loader and end fittings to accommodate sail maker provided Antal mainsail sliders and/or boltrope. Also included with the mast are; Spartite mast wedge material, offshore tricolor/anchor light, bow and deck light with SS guard andJlag halyard cheek block at masthead and cleat at deck. Hall Spars boom of 6061-T6 aluminum with off-white Awlgrip finish, welded gooseneck fitting, lug for OuikVang internal 12:1 mainsail outhaul with external cleat, bale for mainsheet block and painted black bands. Outboard end to accommodate single line reef to starboard and 2nd clew reef to port. .Hall "J" length carbon fiber whisker pole with 2 bridles and trip line, short track on front of masJ, and two deck mounted retaining clips shipped loose for owner to locate.Navtec continuous rod rigging and N690 style open body turnbuckles with headstay -17 pre-assembled for furling system, backstay -17, uppers -17, intermediates -12, lowers -22.Harken MKIII Unit 2 size furling system with airfoil performance extrusion, corrosion proof spool and drum, tapered torque tube, AirSwivel for reduced weight aloft, cast aluminum Hardcote anodized chafe guard, and all black low stretch New England adjuster line.Hall Rigging package includes; two Technora jib halyards .and one Spectra spinnaker halyard each with Tylaska T-12 SS shackles and flemish eye terminations['2:'1 ',riain halyard of Technora with Wichard #1495 shackl~, XLS Mainsheet and two traveler control adjuster'lines, two XLS-900 Spectra genoa sheets, two Maxibraid taperedSpectra spinnaker sheets, one XLS Dacron spinnaker tack line, single 3/8" Crystalyne checkstays that can beclipped forward when not in use, burgee halyard of white 5/32" Dacron cord. Three reef lines are also included; Tack reef & clew reef #1, together, are one continuous reef line to starboard. Tack reef #2 doubles as cunningham to port. Clew reef #2 is included with it's own dedicated hardware. 2:1 Whisker pole foreguy with Schaefer 504-09 block with snap shackle.Sailtech -17 Long integral hydraulic backstay adjuster. Hall D-30 aluminum Ouik-Vang w/ Harken 30:1 cascading adjuster tackle & powerful stainless return spring to lift boom in light air and support boom with sail furled, eliminating the need for a topping lift.Custom designed 316 SS chainplates, stemhead and backstay tang. Installed Package Options Refrigeration PackageSeafrost Mechanical Refrigeration.Additional Plates & Controls for Freezer Supplementary 11OVAC Shorepower Assist. Supplementary Power PackageAdditional 210 amp Lifeline AGM Battery for total of 630 amps for house banks (location is in lieu of bottom nav station drawer).Heart Freedom 25 Inverter/Charger (in lieu of standard ProMariner 30-3 charger).Heart Echo Charger (to service engine start battery through AC system).Heart Link 2000 Battery Monitor (for (2) house battery banks).Heart Link 10 Battery Monitor (for engine battery). Supplementary Plumbing Package Vacuflush Forward Head. Dockside Water Inlet.Seagull Water Purifier in Galley. Cruising Accessory Package Cockpit Table.Companionway Screens.Espar D5LC heating system with ducting into the two sleeping cabins and main cabin.Lewmar 64CEST Two Speed Electric Primary Winches.UltraSuede or UltraLeather Covered Cushions in Main Cabin (in lieu of standard).Edson Radar Mast Thru-Deck and under-deck mounting platform (for 3.5" diameter mast). Microwave Oven in GalleySea Water Washdown in Anchor Locker.Harken Adjustable Genoa Leads.Many additional photos herehttps://docs.google.com/document/d/1QEllizB6x4FKTe3kGwlbjYaLgJMrQEg8x6PdVtIa14Y/pub Manufacturer Provided Description Great boats don’t happen overnight. Helped by new materials and techniques, they evolve from the joint experiences of designer, builder and owners to become state-of-the-art. J/46 is such a vessel, inheriting the proven hull shape of the J/44, an offshore blue water classic, having won the Fastnet, Sydney-Hobart, NYYC Queen’s Cup and Trans-Atlantic races. J/44 is the only Class of yacht ever to be given its own class start by the Cruising Club of America in the Newport-Bermuda Race. To create the J/46, a foot of sailing length is added for speed; a transom swim/boarding platform for convenience; a carbon fiber mast and low VCG 6.2’ shoal draft keel for more stability; and a resin-infused, composite hull and deck for greater strength. Below decks, the choice was clear, use the same beautifully varnished cherry or teak joiner work, entertainment center and styling so highly acclaimed in our deluxe J/160. J/46 is a maxi-Ditch yacht, the tallest yacht that can fit under the bridges of the Intra-Coastal WWaterway. Yet she is non-intimidating. A high length-to-beam ratio on the waterline of this sea-kindly yacht significantly improves tracking offshore in large waves and makes sail plan balance less critical. J/46 sails with either main or jib only, always responding predictably to a light touch on the helm. Sail power with good stability allows cruising with working jib rather than large genoa. That’s less work for the crew and improved visibility for the person on the helm. J Boats’ unique spinnaker system makes downwind sailing possible for two. A modern asymmetric spinnaker attaches to the top of the anchor roller, is contained within a cockpit-controlled snuffer, and is stored, ready-to-use, in the bow locker. The spinnaker is hoisted to the masthead, 2’ above the headstay intersect, leaving space for the snuffer to shift on a jibe. Jibing is then easy. One simply lets off one spinnaker sheet and pulls in the other.

1987 Hunter Legend 37 - Fantastic Condition - Many Upgrades - Sailboat - 375 38

Pensacola, Florida

Model Legend

Length 37.5

Owned by a 50T Coast Guard Master Licensed Captain with sailing/towing endorsements. We're offering for sale our Legend 37 sailboat. She has around 500 hours on the Yanmar 3HM35F 34hp diesel. Injectors and injection pump have been rebuilt. New lift pump. ~450w of solar panels and a Xantrex 2000 inverter. Sails are two years old. 3 year old Hypalon dinghy on davits with 9.8hp Tohatsu outboard. Honda eu3000i generator. Cash only (no seller financing, etc).She is priced on the upper end of her class, but the others aren't necessarily turn-key. We'd be happy to take a serious buyer out for a daysail to experience how quick and smooth she runs.Our vessel is turn key after we have gone through everything over the years. We have owned her around 5 years and now have 10 footitis.Five year old bimini and dodger installed (along with targa fill piece) and replaced the standing rigging.September 2010 we replaced the steering chain, steering cable, throttle cable, and shift cable.In March 2011 we installed a new Mermaid M16 (16,500 BTU) reverse cycle heat and air unit with FX1 digital control system.We also hauled out in March 2011 for fresh bottom paint. SR60 by Petit was what we used. 3 coats overall and 4 along the waterline, leading and trailing edges. Paint is still in great condition according to our diver and will probably last another year or two with maintenance, but we'd be happy to repaint the bottom for a buyer after closing.August 2011 we purchased a Honda eu3000i electric start generator, which runs the a/c and all power as needed.November 2011 we installed a complete new Coldmachine refrigerator with a small freezer box. It is a large fridge area. November 2011 we rebuilt all of the winches and replaced any worn parts.February 2012 we replaced the head.May 2012 we installed 3 140w solar panels and a Xantrex SW2012 100amp charge/inverter with control panel.June 2012 installed 4 Klipsch outdoor speakers ($500/pair).August 2012 we replaced the two burner stove/broiler, with a new Force 10 two burner stove/oven and a new 17# fiberglass propane tank.September 2012 we replaced the mainsail with a new custom built sail and a new mainsail cover; we still have the repaired original that is usable, but not necessary with the new sail. We also rebuilt the injectors, injection pump, and replaced the lift pump, so the fuel system is in top shape.March 2013 we replaced the holding tank with a 20 gallon waste grade bag.August 2013 repainted the non-skid.September 2013 we replaced the headsail with a new one. We still have the old one, which is still usable. We still have the usable sail we removed. November 2013 we installed the R2D2 Raycor filter gauge.August 2014 replaced the wall carpet in the v-berth. We also had the a/c professionally serviced by the factory to keep it in top running condition. We have also touched up the non-skid in high wear areas.Manson Supreme anchor, which has held over 300k pounds of boat (rafter on a single hook) with friends who will back that up. We have 120 feet of chain and 250 feet of line for a 370 foot total rode.Wifi boost antenna and router which enhances wifi reliability on the boat tremendously.She has well supported davits holding a 2011 RIB and 2012 9.8 4-stroke outboard.She also has a spinnaker with sock.6 Group 29 batteries with nearly 700aH of capacity. With the solar, you can stay out for days without charging.

Narrow Results

Current search reset all.

• Keyword: force 5 sailboat
• Force 5 (2)
• Canadian Sailcraft (1)
• HUTCHINS (1)
• Hughes Columbia (1)
• J Boats (1)
• Tayana 37 (1)
• Cruiser Motorcycles (4)
• Racer Boats (2)
• Sloop Sailboats (2)
• California (4)
• New York (4)
• Connecticut (3)
• Florida (3)
• Michigan (2)
• Maryland (1)
• Massachusetts (1)
• Ontario (1)
• Vermont (1)
• Wisconsin (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

2021 Crestliner 2250 Sportfish

Port Clinton, OH

2017 South Bay Tritoon

Wesley Chapel, FL

2009 Steiger Craft 26 Miami

Cranston, RI

2015 Robalo 226 Cayman

Cleveland Heights, OH

2014 MasterCraft X30

The Lakes, NV

2008 Correct Craft Nautique 236

2007 Scout 242 Sportfish

Indianapolis, IN

Create Alert

Please, name this search

Select Interval

Alert Successfully Created