hake yachts

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

How Dangerous is Your Shore Power?

DIY survey of boat solar and wind turbine systems

What’s Involved in Setting Up a Lithium Battery System?

The Scraper-only Approach to Bottom Paint Removal

Can You Recoat Dyneema?

Gonytia Hot Knife Proves its Mettle

Where Winches Dare to Go

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Rhumb Lines: Livin’ the Wharf Rat Life

Re-sealing the Seams on Waterproof Fabrics

Safer Sailing: Add Leg Loops to Your Harness

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews

A trailerable pocket cruiser introduced in 1984 by Hake Yachts, this pricy plumb-bowed sloop is made for exploring the shallows. It's laid out for a cruising couple or young family.

Nick Hake graduated from the Milwaukee School of Engineering in 1974, then pulled up stakes and left the cold Great Lakes winters for sunny Miami, where he became head chef at Horatio’s restaurant in the tower of the Coconut Grove Hotel. While working nights in that occupation, he began building boats for profit, starting with molds and dinghies. Of those times, he says “It’s what I wanted to do. I love boats and always wanted to be self-employed.”

Within the year, he was ready to take the plunge into full-time boatbuilding, so he hung out his shingle and set up shop. In the ensuing eight years he built 2,000 dinghies before introducing a 17-foot sloop he called the Slipper. Eventually stretched to 18 feet, the boat was renamed The Fox, to distinguish it from a competitor’s daysailer called The Hen.

Five years later Hake introduced a 22-footer, and named his company Seaward. He eventually stretched the 22 into a 23, which he still builds; then, exhibiting a case of one-foot-itis, made a 24-footer. That one he stretched to 25 feet—and that boat is the subject of our story. It’s built in the Stuart, Florida warehouse that Hake established in 1984. along with its 18, 23-, and 32-foot siblings.

All of Hake’s boats are shallow-draft designs for trailer sailors. He’s in the process of building tooling for the prototype of a 45-footer for his personal use that will be put into production after testing in the Caribbean. It, too, is designed with a shallow draft for gunkholers.

Since its formation, the company has produced 2,000 dinghies, 1,000 Foxes, 300 23-footers, 591 25-footers, and 41 of its relatively new 32- footer.

In 1993 Hake was approached by a group of Philadelphia lawyers who owned a conglomeration of other businesses, and he sold them the company. However, after two years, the economics of the boatbuilding business wore thin with the investors. When they offered to sell the company back to Hake for pennies on the dollar, he again assumed ownership. “I learned how much I missed the business,” he says. “Now I have the luxury of managing it as a non-starver, compared to some other builders.”

Design Of his designs Hake says, “I have no interest in racing, but I do want to go fast. I want to design and build boats that will go as fast as possible, within the context of boats that are gunkholers.”

He categorizes the Seaward 25 as a “pocket cruiser for adult audiences. I designed a boat that is the target boat I would build for myself for cruising in Florida’s waters and in the open sea down to the islands. I built it for the stuff I do.”

The hull is designed with a nearly plumb bow and stern to maximize waterline, and performance. The company’s brochures are misleading here: The LWL is published as 23′, but is 23’8″; the LOA is 26’9″. However, the length on deck at the headstay is nearly identical to the LWL, the difference accounted for by the anchor platform.

Hake describes the hull shape as having a “spherical tumblehome,” with soft chines and bilges, as compared to flatter sections on other boats. Considering her displacement of 3,600 pounds, of which 1,200 pounds is ballast, and 280 square feet of sail, the design produces a tender performer.

He says she performs best when heeled 10 degrees, and that sail should be shortened when the wind pipes up to 15-17 knots. Sailing a test boat in 8 knots of breeze with a full main and 135% genoa, we were within Hake’s recommended heel angle and the helm was balanced.

Of the relatively high topsides and bow, he says “they’re designed that way because I don’t want water coming over the bow. I don’t like to be wet.”

Underwater appendages are a shallow, 2′ 1″ deep, 8-foot long fixed keel, and a fairly small, low-aspect transom-hung rudder. In a modification from early models, Hake added a 26″ wing to the aft part of the keel in 1989. The wing helps increase the keel’s profile when heeled, and, according to Hake, improves upwind perfomance.

The Seaward 25 has been on the market since 1984 in various models, and is continually evaluated with an eye to improving performance or livability. It was last redesigned in 1995.

Appearance Curbside, this boat’s appearance and hints of her personality seem to change with one’s point of view. Viewed from the forward quarter, her most striking characteristics are a plumb bow, a high, sloping sheer line, and beam carried well aft, with a bit of tumblehome near the cockpit.

In profile, she looks workmanlike. A moderate sailplan on a single- spreader 7/8 rig balances a cabintop extending far enough forward of the mast to carry headroom into the forward cabin without appearing top-heavy.

Her profile is accented by the anchor platform, four shiny stainless steel ports, and bow and stern pulpits. Call her gracefully workmanlike, or purposefully fair, depending on your point of view.

Deck Layout Since she was conceived by Hake as a “sailboat for mature audiences,” the rig, layout of deck gear, and cockpit size are straightforward and uncomplicated. Though wheel steering is an option, and space is available for installation of cockpit speakers, she’s a far cry from a dockside entertainment center. The wheel diameter is 24″, which allows easy movement for helmsman and access to the stern gate. However, after our test sail we concluded that we’d prefer steering with either a tiller or a larger wheel, so steering from the rail doesn’t wear out the triceps.

With 46″ of clearance between the wheel pedestal and companionway, and 25″ wide cockpit sole, she’ll seat four on seats and two in aft corners. Seats are 15″ wide and backrests 11″ high, adequate for most adults. Moving around in the cockpit while underway will be a greater challenge if she’s equipped with a tiller.

With the mainsheet located mid-boom, the trimmer operates at the companionway. Primary winches are close at hand, so the helmsman can steer without interfering with crew; conversely, the controls are close enough to allow relatively easy singlehanded sailing.

Halyards are led aft through stainless turning blocks to Ronstan rope clutches and an Anderson #10 winch. Replacement of primary winches with Anderson #16 self-tailers is a $650 option.

The starboard lazarette is 28″ deep, 34″ inches wide, and more than 6 feet long—adequate for storage of an inflatable dinghy or spare sails. Space for a 6-gallon fuel tank is located under the aft starboard seat. Whether equipped with a one-lung diesel or outboard, this is a good idea that other builders of boats this size would do well to emulate. The tank is easily accessible, portable, saves space belowdecks, and reduces production costs.

There’s no locker to port since the space below is occupied by a quarterberth. The seat lid raises to provide access or ventiliation to the berth.

A recent change from wood to Delrin runners for companionway hatchboards means the hatch has decreased friction, maintenance needs, and cost, and greater weather resistance.

The deck is surrounded by 22″ pulpits and a 20″ tall lifeline. Movement underway was unimpeded, except by a dodger that narrowed the space between the cockpit and toerail. Shrouds dead-ended at the top of the cabintop and stainless steel handrails on the cabintop all provide excellent handholds. The nonskid has a very aggressive pattern that provides grip on a wet deck and adds to her appearance.

At the bow, a stainless steel strike rail forward of the hawsepipe protects the deck from being damaged by ground tackle. The anchor well, a compartment isolated from the forward cabin, holds 20-30 feet of chain and 150 feet of line. It drains overboard. A single 10″ stainless cleat, larger than those found on most similar-sized boats, is on the foredeck. A Bowmar bow hatch is 17″ square.

As on many boats with deck-stepped masts, electrical connections may create problems. The wiring connections at the butt of the mast can be damaged or kicked loose, but maybe that goes with the territory.

The backstay is attached to the stern pulpit, and this concerned us: It was hard to see how to get good headstay tension, and with mid-boom sheeting we thought there might even be mast stability worries. Hake says the mast is so stiff that bending it is not worth trying. As for strength, he provided photos of a boat suspended from a crane with lines attached to bow and stern pulpits.

Belowdecks Hake espouses two principles that affect his approach to designing spaces belowdecks. The first places function ahead of form: “We use every inch of space we can, and design so everything can be removed and the interior hosed out for cleaning.” That’s a worthy objective, certainly more easily accomplished on a 25-footer than a larger cruiser. Solid doors, however, are installed for privacy in the forward stateroom and head.

Second: “We use no carpeting, cloth, or Formica, because they tend to absorb moisture and odors, peel, chip and tear, and are hard to clean.” The company will, however, install wood battens on the hull in the cabin for owners wishing for a warmer feel.

Arrangement of spaces belowdecks is straightforward. The galley runs fore and aft to port, opposite the head; a short settee to port sits opposite a 6- footer to starboard that converts to a berth. Other sleeping accommodations are in the bow and a quarterberth in the port quarter.

The dining table is mounted on the bulkhead and secured with an eye and hook, but has no legs. It is deployed by being unlatched to a horizontal position and moved horizontally on a stainless steel bar until situated amidships. At that point, two adults on both sides of the table can dine. It’s a good arrangement, except that when not in use, the wire securing the table to the bulkhead forms a loop that could catch an unsuspecting passenger. Add Velcro and the problem is solved.

Headroom in the cabin is 5′ 6″, but slightly higher in the galley when the hatch is open.

Operating space on the galley counter is 19″ x 15″ inches, and the space in which the stove is mounted 25″ x 42″—adequate for the preparation of typical sailing meals. The galley may be equipped with a one- or two-burner Origo alcohol stove. The ice box is big enough to hold two large ice blocks.

While there are bunks for four, real privacy will be hard to find, as on any boat this size. It’s best for a couple, or a couple with one or two small fry.

The forward cabin has a 7′ V-berth that is 57″ wide at the head. Clearance between the top of the cushion and the deck is 39″, so there’s room to dress while seated on the cushion without banging the deck. A vanity to starboard is 30″ x 16″; storage is in a hanging locker to port and shelves lining the hull. Fresh air comes from three vents.

Like most quarterberths, this one is designed to double as a storage area. The berth is 80″ long and 32″ wide, outfitted with a thin pad. When not in use, the pad can be rolled up and stored in straps attached to the hull. However, a crewmember intending to sleep frequently in the space will benefit from a thicker pad.

Interestingly, the designer’s intent is for two crew to sleep athwartships when the port and starboard settees are united across the center of the saloon to create a double berth.

The head is a small, enclosed space with a sit-down shower, Jabsco toilet, and one opening port. There’s no sink, and pressurized hot water is an option.

If installed, a diesel is located below the companionway steps, with 270-degree accessibility from the cabin. Access aft is from the starboard cockpit cocker, or by removing a panel in the quarterberth.

Common complaints about the boat are the lack of engine and ice box insulation.

“Those are legitimate,” Hake says. “We had to sacrifice somewhere, so the thickness of insulation in the ice box is between 1-3/4″ and 2-1/2″. But it’s been improved in the last year. We can always add insulation to the engine box, but that adds a lot of weight.”

Construction Hake estimates that 500 man-hours are spent in the construction of each Seaward 25. Based on our inspection of four boats, three used, it appears that his crew is doing good work.

The lamination schedule for all Seaward models is substantially the same: following the application of a gelcoat, vinylester resins are employed in the skin coat. The next step is the layup of 1.5-ounce chop-strand mat applied with a chopper gun. “I know some people don’t like that,” says Hake, “but it’s an effective way of assuring that there’s resin on both sides of the strands.”

The balance of the layup includes a layer of 2 mm Coremat, which helps prevent print-through from the main laminate, followed by 1.5-oz.mat, 34-oz. triaxial cloth to add density and strength, and 1708 biaxial or 34-oz. triaxial mat. There’s no wood or structural coring in the layup of a hull.

In the deck, PVC foam and Coremat are provide structure and sound deadening, and the headliner is a solid fiberglass structural member vacuum-bonded to the deck.

Deck hardware is tapped into 1/8″ aluminum plates bedded in the fiberglass lamination, which has been tested to 14,000 psi, Hake says. “The aluminum has been tested to withstand 20,000 psi.”

The hull-deck joint is bonded with a slurry of polyester putty impregnated with talc and fibers, and fastened with stainless steel bolts on 6″ centers. The keel is constructed of a hollow fiberglass structural mold into which a slurry of resin and lead are added. It is attached to the hull with 5/8″ threaded rods embedded into the ballast and bolted, glued, and glassed to the hull.

The company fabricates most of its stainless steel parts, including shiny, precisely fabricated stainless steel ports, and four-bolt cleats.

With such a long production run, there are some differences in construction details and quality between model years. Prospective buyers should consult online discussion groups for specifics, for example the Seaward Yachts Forum linked through www.trailersailor.com .

Performance With assistance from Karen Trusty of The Sailing Life in Portland, Oregon, we sailed a two-year-old Seaward 25 on the Columbia River. At 6′ tall and weighing 165 pounds, the owner of the boat claims that he can rig and launch the boat by himself in only 1-1/2 hours.

Once underway we learned that she turns in a boatlength, despite the length of her keel, and backs in a straight line once the helmsman compensates for prop walk.

We sailed in 8-10 knots of wind, flying a 135-percent genoa, the maximum recommended by the designer, and full mainsail. The helm was responsive, and the boat quickly accelerated with the occasional puff of breeze.

In a steady breeze we sailed at 4-5 knots on a reach. Hardening up and pushing to within 45 degrees of the wind, speed dropped by about a knot. We couldn’t record precise speeds because of a dirty speedo impeller. In fact, it was hard to get an accurate feel for her performance altogether, because the river current flows into the prevailing winds. However, sailing cross-current on a beam reach, she showed good speed, helm balance, and tracking. We’d like to take a longer sail to weather in open water.

She did provide a comfortable ride, especially when compared to water- ballasted trailerables, and was easy to sail with little muscular effort.

Power Optional powerplants are an outboard or 9- or 20-horsepower Yanmar diesels. Most boats are equipped with the1GM10, but owners in areas with stronger current and bigger seas voice the opinion that the larger engine is a better choice.

Price Characterized by Hake as a “Volvo,” there’s no arguing that the boat is priced in the upper stratosphere, compared to similar-sized trailerables.

Base price for the Seaward 25 is $34,000, FOB the factory. Add a wheel ($1,900), mast crutch ($210), 25 gallon portable head ($375), one-burner Origo stove ($250), Yanmar 1GM10 ($7,100), galvanized double-axle trailer ($3,600), instruments, and other accessories, and the price escalates by 25-40 percent.

Of the price, Hake says, “First, stand back and look at the boat. It’s very nice to have people stop you wherever you go and say ‘nice-looking boat.’ We pay more for one of our ports than the production builders pay for all of theirs, and ours are worth it.  Same for our 4-bolt  cleats, stanchion bases, winches, blocks. Our glasswork is several steps better. We recently made our trailer people use 2″ bearings, 6-ply steel-belted tires, and the best brakes you can put on a trailer.”

Conclusion We examined four of the boats, one new and three used. We found the workmanship to be consistent. Gelcoat surfaces were smooth and free of printthrough. We saw no evidence of crazing. Except for normal wear and tear, a well-maintained boat appears to stand up well to normal use. Construction is certainly solid, and the hardware first-rate. We still aren’t sure about the backstay connection, but do acknowledge the picture of the boat being suspended by the pulpits.

The basic hull design and rig are well-suitedfor coastal sailing, real gunkholing, and fairly easy trailering. The cockpit, deck, and running rigging layouts are simple and workable for a singlehander. The layout belowdecks shows a sensible mix and weighting of elements—an enclosed toilet and a workable galley in a boat this size are pretty fair accomplishments. The “camper” elements—portable fuel tank provision, ability to access the quarterberth from the cockpit, large ice-box space with the sacrifice of insulation—seem to us wise choices, considering how the boat will likely be used.

For most potential buyers, her greatest drawback will be price. Water-ballasted, trailerable 25-footers (her competition) sell for significantly less, assuming the use of outboard power. They aren’t built as robustly, and will depreciate faster and farther, but they get the basic job done. The extra $300-400 per foot that Hake charges for the Seaward 25 might, for the devoted cruising couple in Florida, the Bahamas, or anywhere there’s shallow water to be explored, be worth the difference in the long run.

In the used-boat market, the resale value of a five-year-old Seaward 25 is typically between 85 and 90 percent of its original price. At press time, there are 12 used Seaward 25s advertised for sale on the Internet. Asking prices range from $13,500 to $53,900, with the average around $42,000.

Hake Yachts, Inc. 772/287-3200 www.seawardyachts.com

RELATED ARTICLES MORE FROM AUTHOR

Hello owner of 1995 seaward 25 26,9 with 9 hp can I install a 3 cyl fresh water Yanmar with out much difficulty

also added 2 in forward and 2 in depth on rudder, was thinking of adding 4 in to the wing keel Thank You

I have a 25′ from 1990, Great boat ! considering replacing the rigging soon. Does anyone know if the end fittings on mast are Seaward/Hake specific?!

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

Island Packet 370: What You Should Know | Boat Review

How To Make Starlink Better On Your Boat | Interview

Catalina 380: What You Should Know | Boat Review

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

For more than thirty years, Nick Hake owned and operated a highly successful sailboat building business in Stuart FL. The company was Hake Yachts, and the boats produced were Seaward Yachts.  Since Nick retired and sold Hake Yachts, the company is still going strong under new ownership, building and selling the boats Nick designed and refined over the years.  Nick was a hands-on owner then and is now as owner of NH Designs , a company providing brokerage, transport, repair and consultation to the

sail and power boating community across the country.

Nick's goal at NH Designs is to make his customers the beneficiary  of the knowledge and experience he gained while designing, building and selling boats. 

Seaward 19RK

Pocket cruiser

F rom Hake Yachts comes this true pocket cruiser. The designer's name is not listed, but I think I spot the work of Nick Hake's hand in this design.

This is a handsome little cruiser with a perky spring to the sheer and a low, well proportioned cabintrunk. The short ends give it a purposeful look. The LOA of 21 feet 6 inches includes the rudder. The actual LOA from tip of stem to tip of transom is 19 feet, hence the 19RK.

With 19 feet of hull to work with you might expect this to be a chubby little boat. The D/L is 159 and the L/B is 2.53 indicating a very beamy boat. The hull is all pure sailing length with only a tiny bit of overhang in the bow. Both the keel and the rudder retract vertically for shoal-draft capability and trailering convenience.

There is an 800-pound bulb at the tip of the lifting keel. My guess is that with the keel down and the 4-foot 6-inch draft, this little hooker will go to weather quite nicely and be a sweet little sailing boat.

Note that the plan form of the rudder blade is about 80% of the plan form of the keel fin. That means the rudder will provide a lot of lift for the 19RK to go to weather. With the rudder and keel retracted the draft is only 8½ inches. That should let you step right off onto the beach. Who needs a dinghy?

The accommodation layout is critical in a pocket cruiser. Of course, cruising in Florida in September is one thing, and cruising in the Pacific Northwest in September is another. Cruising a small boat in a chilly and wet climate is always a challenge. If you cruise in a dry and warm area you can use the cockpit as an extension of the accommodations. In Seattle? Not so much on many days. You will be stuck inside the boat.

So, keeping that in mind the fact that I live north of Seattle, I look at this layout and think: Where would I sit? The settee portion of the quarterberths are short, but it's important to remind myself that this is only a 19-foot LOA hull.

The enclosed head is convenient and a luxury on a 19-foot pocket cruiser. If the enclosed head were eliminated and replaced with a stowed portable head, the starboard berth could creep forward alongside the keel trunk to increase sitting room.

The galley is really tiny, but with a one-burner stove, some ingenuity and some creativity, I would image some decent meals could be prepared. It's asking a lot for a 19-foot boat to have "cruising accommodations."

This is a very simple rig and will be easy to take down for trailering. The swept shrouds do not need spreaders due to the wide beam of the boat. Diamond shrouds stiffen the lower section. There is enough sweep on the shrouds to eliminate the need for a backstay. This means you can use a square-head mainsail and not worry about clearing the backstay. The SA/D is 16.94. The short LP jib will be a breeze to tack and this should be a very easy boat to sail. An optional 6-horsepower outboard will provide auxiliary power.

Doing a cruising boat in 19 feet is a real challenge. I think Nick Hake and the crew at Seaward have done a good job putting together a design that will have a lot of sailors dreaming about starting out on a life of cruising.

Also in Perry on Design

• Dragonfly 40
• Wallyrocket 51
• Clubswan 28
• Beneteau Oceanis 37.1
• M.A.T. 12.2

Also from Robert H. Perry

• Today's news
• Reviews and deals
• Climate change
• 2024 election
• Fall allergies
• Health news
• Mental health
• Sexual health
• Family health
• So mini ways
• Unapologetically
• Buying guides

Entertainment

• How to Watch
• My watchlist
• Stock market
• Biden economy
• Personal finance
• Stocks: most active
• Stocks: gainers
• Stocks: losers
• Trending tickers
• World indices
• US Treasury bonds
• Top mutual funds
• Highest open interest
• Highest implied volatility
• Currency converter
• Basic materials
• Communication services
• Consumer cyclical
• Consumer defensive
• Financial services
• Industrials
• Real estate
• Mutual funds
• Credit cards
• Credit card rates
• Balance transfer credit cards
• Business credit cards
• Cash back credit cards
• Rewards credit cards
• Travel credit cards
• Checking accounts
• Online checking accounts
• High-yield savings accounts
• Money market accounts
• Personal loans
• Student loans
• Car insurance
• Home buying
• Options pit
• Investment ideas
• Research reports
• Fantasy football
• Pro Pick 'Em
• College Pick 'Em
• Fantasy baseball
• Fantasy hockey
• Fantasy basketball
• Download the app
• Daily fantasy
• Scores and schedules
• GameChannel
• World Baseball Classic
• Premier League
• CONCACAF League
• Champions League
• Motorsports
• Horse racing
• Newsletters

New on Yahoo

• Privacy Dashboard

15 men brought to military enlistment office after mass brawl in Moscow Oblast

Local security forces brought 15 men to a military enlistment office after a mass brawl at a warehouse of the Russian Wildberries company in Elektrostal, Moscow Oblast on Feb. 8, Russian Telegram channel Shot reported .

29 people were also taken to police stations. Among the arrested were citizens of Kyrgyzstan.

A mass brawl involving over 100 employees and security personnel broke out at the Wildberries warehouse in Elektrostal on Dec. 8.

Read also: Moscow recruits ‘construction brigades’ from Russian students, Ukraine says

We’re bringing the voice of Ukraine to the world. Support us with a one-time donation, or become a Patron !

Read the original article on The New Voice of Ukraine

Recommended Stories

Dodgers' reported reaction to shohei ohtani's $680 million deferral request: 'holy f***'.

Andrew Friedman reacted like the rest of us when he heard Shohei Ohtani's contract proposal.

Boeing targets a culprit of 737 MAX production woes: 'Traveled work'

Boeing's CFO today outlined the steps the company is taking to address a series of issues affecting the safety and reliability of its planes (not to mention the company’s reputation).

Jon Rahm finds that there’s one thing LIV money can’t buy

Jon Rahm says leaving behind PGA Tour traditions is ‘difficult.’

Pass or Fail: Houston Texans show off new road uniforms after Reddit leak

Texans CEO and Chairman Cal McNair took to Reddit to show off one of the team's new uniform combinations in response to a leak.

2024 Fantasy Baseball: 12 sleeper pitchers not getting enough love in drafts

Fantasy baseball analyst Dalton Del Don wraps up his positional sleeper series with the pitchers!

A 15-year problem that has plagued corporate America is finally turning around

Productivity is rebounding after 15 years of no gains. That could help drive stocks higher.

2024 Fantasy Baseball: 7 potential draft busts from the infield

No one likes talking about busts, but identifying them can help you avoid a problem down the line. Fantasy baseball analyst Dalton Del Don highlights some infield draft fades.

2024 NFL free agency: Fantasy football winners and losers

With the massive wave of NFL free agency moves behind us, fantasy football analyst Matt Harmon shakes out who saw their fantasy value rise or fall for 2024.

2024 Fantasy Baseball: Wyatt Langford leads 7 key draft sleepers from the outfield

Fantasy baseball analyst Dalton Del Don continues his sleeper series identifying draft gems at every position. This time, he highlights some outfielders.

Dodgers' eighth-inning rally sparked by ground ball going through Jake Cronenworth's glove

A potential inning-ending double-play wound up being a game-changer for the Dodgers.

What does Clemson's lawsuit against the ACC mean? Here are 4 key questions on move that could have massive implications

The result of FSU and Clemson’s legal claims could impact all of college athletics. Will more schools join in? Where could Clemson and Florida State land?

Iowa OT Kadyn Proctor reportedly leaving Hawkeyes after 2 months, likely returning to Alabama

The former five-star recruit and freshman starter appears to be returning to Alabama.

MLB 26-and-under power rankings, Nos. 10-6: Reds' young hitters, Dodgers' young pitchers among baseball's best

The Reds, Dodgers, Brewers, Padres and Tigers round out the top 10 of this year's young talent rankings.

The best soundbars for 2024: My 7 top picks for theater-quality audio at home

A soundbar is one of the best TV upgrades you can buy. Here are the best models for every type of viewer.

20 most dangerous counties for fatal crashes with big trucks

Federal crash data show the 20 worst counties for fatalities with a big truck, by percentage. In one West Texas county, trucks were involved in more than half the traffic deaths.

Players react to Rams DT Aaron Donald announcing his retirement: 'THANK GOD'

Not everyone was sad to see the three-time DPOY leave the game.

March Madness: A breakdown of North Carolina and the West region from an odds perspective

Can North Carolina make a run through the West Region?

UFC reaches settlement in antitrust lawsuits, agrees to pay out $335 million

The settlement, which was reached on March 13, will see TKO Group pay out $335 million.

Has Caitlin Clark locked up Naismith Player of the Year? Here are 5 contenders for the nation's top award

Clark's record-breaking season has transcended college basketball, but there are several deserving candidates this season.

Nearing a loaded 2024 NFL Draft, Justin Fields and the 2021 QB class remind us the position is a crapshoot

Why Fields wasn’t scooped by other teams largely centers on his one year of rookie contract control, which features a fifth-year option that will be set at $25.6 million.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Seaward 23 is a 24 ′ 6 ″ / 7.5 m monohull sailboat designed by Nick Hake and built by Hake Yachts (Seaward) between 1984 and 2002.

• 1 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 2 / 15 Alum Creek, OH, US 1996 Seaward 23 $12,500 USD View
• 3 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 4 / 15 Alum Creek, OH, US 1996 Seaward 23 $12,500 USD View
• 5 / 15 Alum Creek, OH, US 1996 Seaward 23 $12,500 USD View
• 6 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 7 / 15 Alum Creek, OH, US 1996 Seaward 23 $12,500 USD View
• 8 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 9 / 15 Alum Creek, OH, US 1996 Seaward 23 $12,500 USD View
• 10 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 11 / 15 Alum Creek, OH, US 1996 Seaward 23 $12,500 USD View
• 12 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 13 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 14 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View
• 15 / 15 Nashville, IL, US 1996 Seaward 23 $24,000 USD View

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Also offered with an unstayed cat rig. Yanmar inboard offered as an option.

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Turn Your Curiosity Into Discovery

Latest facts.

Facts About The Research in Epithalon Properties Overview Analysis

How To Protect Children From Junk Food Marketing

40 facts about elektrostal.

Written by Lanette Mayes

Modified & Updated: 02 Mar 2024

Reviewed by Jessica Corbett

Elektrostal is a vibrant city located in the Moscow Oblast region of Russia. With a rich history, stunning architecture, and a thriving community, Elektrostal is a city that has much to offer. Whether you are a history buff, nature enthusiast, or simply curious about different cultures, Elektrostal is sure to captivate you.

This article will provide you with 40 fascinating facts about Elektrostal, giving you a better understanding of why this city is worth exploring. From its origins as an industrial hub to its modern-day charm, we will delve into the various aspects that make Elektrostal a unique and must-visit destination.

So, join us as we uncover the hidden treasures of Elektrostal and discover what makes this city a true gem in the heart of Russia.

Key Takeaways:

• Elektrostal, known as the “Motor City of Russia,” is a vibrant and growing city with a rich industrial history, offering diverse cultural experiences and a strong commitment to environmental sustainability.
• With its convenient location near Moscow, Elektrostal provides a picturesque landscape, vibrant nightlife, and a range of recreational activities, making it an ideal destination for residents and visitors alike.

Known as the “Motor City of Russia.”

Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname “Motor City” due to its significant involvement in the automotive industry.

Home to the Elektrostal Metallurgical Plant.

Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.

Boasts a rich industrial heritage.

Elektrostal has a long history of industrial development, contributing to the growth and progress of the region.

Founded in 1916.

The city of Elektrostal was founded in 1916 as a result of the construction of the Elektrostal Metallurgical Plant.

Located approximately 50 kilometers east of Moscow.

Elektrostal is situated in close proximity to the Russian capital, making it easily accessible for both residents and visitors.

Known for its vibrant cultural scene.

Elektrostal is home to several cultural institutions, including museums, theaters, and art galleries that showcase the city’s rich artistic heritage.

A popular destination for nature lovers.

Surrounded by picturesque landscapes and forests, Elektrostal offers ample opportunities for outdoor activities such as hiking, camping, and birdwatching.

Hosts the annual Elektrostal City Day celebrations.

Every year, Elektrostal organizes festive events and activities to celebrate its founding, bringing together residents and visitors in a spirit of unity and joy.

Has a population of approximately 160,000 people.

Elektrostal is home to a diverse and vibrant community of around 160,000 residents, contributing to its dynamic atmosphere.

Boasts excellent education facilities.

The city is known for its well-established educational institutions, providing quality education to students of all ages.

A center for scientific research and innovation.

Elektrostal serves as an important hub for scientific research, particularly in the fields of metallurgy, materials science, and engineering.

Surrounded by picturesque lakes.

The city is blessed with numerous beautiful lakes, offering scenic views and recreational opportunities for locals and visitors alike.

Well-connected transportation system.

Elektrostal benefits from an efficient transportation network, including highways, railways, and public transportation options, ensuring convenient travel within and beyond the city.

Famous for its traditional Russian cuisine.

Food enthusiasts can indulge in authentic Russian dishes at numerous restaurants and cafes scattered throughout Elektrostal.

Home to notable architectural landmarks.

Elektrostal boasts impressive architecture, including the Church of the Transfiguration of the Lord and the Elektrostal Palace of Culture.

Offers a wide range of recreational facilities.

Residents and visitors can enjoy various recreational activities, such as sports complexes, swimming pools, and fitness centers, enhancing the overall quality of life.

Provides a high standard of healthcare.

Elektrostal is equipped with modern medical facilities, ensuring residents have access to quality healthcare services.

Home to the Elektrostal History Museum.

The Elektrostal History Museum showcases the city’s fascinating past through exhibitions and displays.

A hub for sports enthusiasts.

Elektrostal is passionate about sports, with numerous stadiums, arenas, and sports clubs offering opportunities for athletes and spectators.

Celebrates diverse cultural festivals.

Throughout the year, Elektrostal hosts a variety of cultural festivals, celebrating different ethnicities, traditions, and art forms.

Electric power played a significant role in its early development.

Elektrostal owes its name and initial growth to the establishment of electric power stations and the utilization of electricity in the industrial sector.

Boasts a thriving economy.

The city’s strong industrial base, coupled with its strategic location near Moscow, has contributed to Elektrostal’s prosperous economic status.

Houses the Elektrostal Drama Theater.

The Elektrostal Drama Theater is a cultural centerpiece, attracting theater enthusiasts from far and wide.

Popular destination for winter sports.

Elektrostal’s proximity to ski resorts and winter sport facilities makes it a favorite destination for skiing, snowboarding, and other winter activities.

Promotes environmental sustainability.

Elektrostal prioritizes environmental protection and sustainability, implementing initiatives to reduce pollution and preserve natural resources.

Home to renowned educational institutions.

Elektrostal is known for its prestigious schools and universities, offering a wide range of academic programs to students.

Committed to cultural preservation.

The city values its cultural heritage and takes active steps to preserve and promote traditional customs, crafts, and arts.

Hosts an annual International Film Festival.

The Elektrostal International Film Festival attracts filmmakers and cinema enthusiasts from around the world, showcasing a diverse range of films.

Encourages entrepreneurship and innovation.

Elektrostal supports aspiring entrepreneurs and fosters a culture of innovation, providing opportunities for startups and business development.

Offers a range of housing options.

Elektrostal provides diverse housing options, including apartments, houses, and residential complexes, catering to different lifestyles and budgets.

Home to notable sports teams.

Elektrostal is proud of its sports legacy, with several successful sports teams competing at regional and national levels.

Boasts a vibrant nightlife scene.

Residents and visitors can enjoy a lively nightlife in Elektrostal, with numerous bars, clubs, and entertainment venues.

Promotes cultural exchange and international relations.

Elektrostal actively engages in international partnerships, cultural exchanges, and diplomatic collaborations to foster global connections.

Surrounded by beautiful nature reserves.

Nearby nature reserves, such as the Barybino Forest and Luchinskoye Lake, offer opportunities for nature enthusiasts to explore and appreciate the region’s biodiversity.

Commemorates historical events.

The city pays tribute to significant historical events through memorials, monuments, and exhibitions, ensuring the preservation of collective memory.

Promotes sports and youth development.

Elektrostal invests in sports infrastructure and programs to encourage youth participation, health, and physical fitness.

Hosts annual cultural and artistic festivals.

Throughout the year, Elektrostal celebrates its cultural diversity through festivals dedicated to music, dance, art, and theater.

Provides a picturesque landscape for photography enthusiasts.

The city’s scenic beauty, architectural landmarks, and natural surroundings make it a paradise for photographers.

Connects to Moscow via a direct train line.

The convenient train connection between Elektrostal and Moscow makes commuting between the two cities effortless.

A city with a bright future.

Elektrostal continues to grow and develop, aiming to become a model city in terms of infrastructure, sustainability, and quality of life for its residents.

In conclusion, Elektrostal is a fascinating city with a rich history and a vibrant present. From its origins as a center of steel production to its modern-day status as a hub for education and industry, Elektrostal has plenty to offer both residents and visitors. With its beautiful parks, cultural attractions, and proximity to Moscow, there is no shortage of things to see and do in this dynamic city. Whether you’re interested in exploring its historical landmarks, enjoying outdoor activities, or immersing yourself in the local culture, Elektrostal has something for everyone. So, next time you find yourself in the Moscow region, don’t miss the opportunity to discover the hidden gems of Elektrostal.

Q: What is the population of Elektrostal?

A: As of the latest data, the population of Elektrostal is approximately XXXX.

Q: How far is Elektrostal from Moscow?

A: Elektrostal is located approximately XX kilometers away from Moscow.

Q: Are there any famous landmarks in Elektrostal?

A: Yes, Elektrostal is home to several notable landmarks, including XXXX and XXXX.

Q: What industries are prominent in Elektrostal?

A: Elektrostal is known for its steel production industry and is also a center for engineering and manufacturing.

Q: Are there any universities or educational institutions in Elektrostal?

A: Yes, Elektrostal is home to XXXX University and several other educational institutions.

Q: What are some popular outdoor activities in Elektrostal?

A: Elektrostal offers several outdoor activities, such as hiking, cycling, and picnicking in its beautiful parks.

Q: Is Elektrostal well-connected in terms of transportation?

A: Yes, Elektrostal has good transportation links, including trains and buses, making it easily accessible from nearby cities.

Q: Are there any annual events or festivals in Elektrostal?

A: Yes, Elektrostal hosts various events and festivals throughout the year, including XXXX and XXXX.

Was this page helpful?

Our commitment to delivering trustworthy and engaging content is at the heart of what we do. Each fact on our site is contributed by real users like you, bringing a wealth of diverse insights and information. To ensure the highest standards of accuracy and reliability, our dedicated editors meticulously review each submission. This process guarantees that the facts we share are not only fascinating but also credible. Trust in our commitment to quality and authenticity as you explore and learn with us.

Share this Fact: