110 foot catamaran for sale

• Newsletters
• Long Island
• Contact & Address
• Surroundings

mousetrap – 110′ Carbon Sailing Catamaran

The mastery of composite for the construction of a Maxi catamaran.

This exceptional sailing catamaran, built using carbon, is one of the largest in the world today.  This multihull was designed to offer at once comfort – thanks to the spacious interior, and sailing performance – witnessed by a sail plan inspired directly from racing trimarans. Van Peteghem Lauriot Prévost, world leader in multihull design is the architect of this 110’.  This firm of naval architects has earned its stripes by designing record-breaking racing multihulls as well as many large custom sailing catamarans.

Specifications

• About Aeroyacht
• Aeroyacht Design
• Aeroyacht TV
• Mission Statement
• Aeroyacht Racing
• Favorite Links
• Customer Testimonials
• Office Location
• BUY A MULTIHULL
• Specifications
• Photo Gallery
• Try Before You Buy
• Yacht Ownership and Demo Sails
• BUY A POWER CATAMARAN
• Yacht Business Ownership FAQ
• MULTIHULLS FOR SALE
• Aeroyacht Superyacht Catamarans
• Global Multihull Search
• Buy A Multihull
• Sell a Multihull
• Multihull News
• Publications & Articles
• Commissioning & Delivery Services

NEW 100′ SUNREEF catamaran

The 100′ Sunreef catamaran is a new luxury catamaran, created by the expert builders at Sunreef Yachts.

Sunreef Yachts adds a new superyacht to its range of exclusive sail catamarans. The Sunreef 100 is an imposing craft made for cruising worldwide in total luxury. The yacht follows the design of the success of the Sunreef 50 , Sunreef 60 , Sunreef 70 and Sunreef 80  catamarans. With a 41.9’ beam, this seaworthy custom superyacht will boast 4660 sqft² of living space including an immense flybridge and bow terrace.

This magnificent superyacht multihull is available in the trademark timeless yet modern style. The 100′ Sunreef catamaran is designed to comfortably accommodate 16 guests in up to 8 staterooms, each with its own bathroom and a separate shower. Crew members are located in a detached area with 2 cabins that can easily house up to 3 persons and one cabin in the forepeak for additional adaptable space.

Only partly occupied by impressive table and broad sofa, ample cockpit will allow for a lot of usable area as well as plenty of possibilities for various arrangements. The Over 800 square feet of fly-bridge constitutes an ideal spot for sunbathing. Equipped with a huge forward cockpit, numerous sun mattresses, dining table and sofas this yacht is the ultimate in luxury and living aboard in comfort.

Shop for a New Multihull

• NEEL TRIMARANS
• NAUTITECH CATAMARANS
• McCONAGHY CATAMARANS
• POWER MULTIHULLS

Catamaran News

Planet Sail tests a McConaghy Multihull

Charles Caudrelier wins Arkea Ultim Challenge

Nautitech 48 – Control of the Wind

Boat Test: Nautitech 48 Open catamaran

NEEL 52 Trimaran VIDEO – Sailing at 17 knots

• Catamaran Steering Positions
• Catamarans vs. Monohulls
• Catamaran Learning Center
• Catamaran Speed
• Catamaran Efficiency
• Catamaran Stability
• Catamaran Safety
• Catamaran Shallow Draft
• Catamaran No Heel Sailing
• Catamarans and Seasickness
• Catamaran Space
• Catamaran Boat Handling
• Catamaran Advantages over Monohulls
• Wave-Piercing Bows
• Catamaran Sailing Schools
• Catamaran Insurance
• Catamaran Charter Business and Tax Savings
• Ask the Owner
• 5 Valuable Tips
• Survey Checklist
• Sea Trial Checklist
• MULTIHULLS & CATAMARANS App for Iphone
• Catamaran Surveys
• Multihull Services
• Catamaran Build Consultation
• Financing Services
• Catamaran Repair & Service Facilities
• Catamaran Demo Rides & Shows
• Catamarans for China
• Yacht Design
• Interior Styling & Yacht Art
• Photography

McConaghy MC63 Power Tourer – showing her pace

Nautitech 48 Open catamaran – Video

Nautitech 48 catamaran – Interior Design

How the Nautitech 48 catamaran was conceived – Designer Comments.

Launched ! – McConaghy MC82P Power

McConaghy 75 catamaran – Stunning NY Loft-Style Interior

VIDEO: Nautitech 48 catamaran walkthrough. Part 1. EXTERIOR

VIDEO: Nautitech 48 catamaran walkthrough. Part 2. INTERIOR

McConaghy 75 Launched.

NEEL 52 trimaran nominated European Yacht of the Year 2023

Helpful tips from aeroyacht.

AEROYACHT PUBLICATIONS

Catamaran books by gregor tarjan.

JOIN AEROYACHT’S NEWSLETTER

110′ Yachts for Sale

Find the perfect 110 feet yachts for sale.

Our website features plenty of 110′ superyachts all around the world, discover the perfect yacht closer to you!

Explore the pinnacle of luxury yachting with FGI Yacht Group’s exclusive collection of 110′ yachts for sale. These resplendent vessels represent the ultimate confluence of elegance, innovation, and nautical mastery. Exquisitely crafted to meet the discerning demands of our esteemed clientele, our 110-foot yachts exude sophistication and unparalleled grandeur. With palatial interiors, technologically advanced amenities, and robust performance capabilities, each yacht is a testament to the fine art of maritime craftsmanship. The 110′ category invites you to indulge in a realm where every detail is meticulously curated to create a transcendent experience on the open sea. Allow FGI Yacht Group to expertly navigate you towards a 110′ yacht that embodies your vision of luxury and seamlessly elevates your seafaring adventures.

JOHNSON 115 SKYLOUNGE W/FB

2026 INACE EXPLORA 115

ECO YACHT 115

DIONYSOS 35

Contact broker, would you like us to call you back.

Your Name Your phone number Best time to call

• Search Used Yachts For Sale
• Search Boats By Brand
• Search Boats By Type
• Search By Location
• Search By Price
• What's My Boat Worth?
• Search Boats Just Listed
• Small Yachts
• Custom Sport Fishing Boats
• Finance A Boat
• Amer Yachts
• Cabo Yachts
• French Yachts
• Gulfstream Yachts
• Hatteras Yachts
• Solaris Yachts
• Sunpower Yachts
• Sunreef Yachts
• Vela Boatworks
• Virtus Yachts
• Why List With United?
• Why Own A Boat Or Yacht?
• Custom Website For Your Yacht
• United Sold Boats
• Buy A Yacht With Crypto
• Find a Yacht Broker Near Me
• Search For Broker By Name
• Meet The United Support Team
• Our History
• Fort Lauderdale Boat Show
• Stuart Boat Show
• Miami Boat Show
• Palm Beach Boat Show
• Other Boat Shows
• Yachting News
• Yacht Closing Services
• River Forest Yachting Centers

Search All Yachts

SUNREEF 100 POWER CATAMARAN

The incredible Sunreef 100 Power Catamaran is the ultimate in luxury cruising. From the massive on board living spaces provided by her 44' 3" beam, to the extraordinary outside entertaining areas, the Sunreef 100 meets all of your criteria. Fully-customizable to the owner's dreams and wishes, the Sunreef 100 Power now offers an incredible array of eco-friendly options as well.

SPECIFICATIONS

• Make Sunreef Yachts
• Model 100 Power Catamaran
• Length 100'
• Length Overall 93' 9

For the environmentally conscious yacht owner who wants to reduce their carbon footprint, a variety of propulsion and power methods including solar, wind, and hydro-electric.

Thanks to the in-house designed and developed solar panel system covering up to 200m², the 100 Sunreef Power maximizes solar energy generation with 40kWp of capacity. Owners have the option of using solar panels, wind turbines, and hydro-electric power derived from the propellers, to charge the ultra-light battery bank which are completely state-of-the-art. It's important to note that these exclusive lithium batteries are 30% lighter than the average marine battery and outperforms it.

If you have any interest in finding out more about Sunreef's incredible eco-friendly luxury catamarans, we invite you to contact United's Jorge Cabre' at (305) 773-2095 or by email at [email protected].

Worldwide Yacht Sales

• Luxury Yacht Price
• Why Are Boats Expensive?
• Boats For Sale Washington
• Sailboats For Sale NJ
• 50 Million Dollar Yacht
• Virginia Yacht Brokers
• Boats For Sale in Maryland
• Boats For Sale Corpus Christi
• Boston Yacht Sales
• Sailboats For Sale NC
• Boats For Sale Canada
• 20 Million Dollar Yacht
• Oregon Yacht Sales
• Yachts For Sale California

Luxury Boats & Yachts

• Yachts For Sale Houston
• Sabre 45 Se For Sale
• Used Center Console Boats For Sale in Florida
• Prestige Yachts For Sale Canada
• Trawler Boats For Sale
• Yachts For Sale Near Me
• Rybovich Boats For Sale
• Used Bertram Boats For Sale
• Azimut Boats For Sale
• Cabo Fishing Boats
• Ocean Boats
• 60 Ft Yacht For Sale
• Viking Sportfish For Sale
• Used Hinckley Boats For Sale
• Used Small Boats For Sale

Popular Builders & Models

• Pilothouse Trawler For Sale
• Motorsailer
• Cabo 35 Express
• Boston Whaler 350 Outrage For Sale
• 52 Viking For Sale
• Aquila Catamaran For Sale
• 54 Hatteras Motor Yacht For Sale
• 61 Viking For Sale
• Sport Boats For Sale
• Sailboats For Sale in South Carolina
• Edgewater Boats For Sale
• Flybridge Yacht
• 55 Viking For Sale
• American Tug

Trending Brands & Types

• San Lorenzo 86 Yacht For Sale
• Fairline Yachts
• Belzona Boats For Sale
• Valhalla Boats For Sale
• Trinity Yachts For Sale
• Sunreef Catamaran For Sale
• Galeon Boats For Sale
• Hunt Yachts For Sale
• Riva Boats For Sale USA
• Legacy Boats
• Henriques Boats
• Outer Reef Trawler
• Ritchie Howell Boats For Sale
• Mag Bay Yachts

Interested In This Yacht?

Contact United Yacht Sales below!

Sunreef 80 Eco

Sunreef 80 Power Catamaran

Sunreef 70 Power Catamaran

Sunreef 70 Eco

(215) 508-2704

• Tao Catamarans
• Dolphin Catamarans
• Voyage Catamarans
• All Pre-Owned Catamarans
• Exclusive TMC Catamarans
• Sold Catamarans
• Buying A Multihull
• Selling A Multihull
• Sailing Schools
• Yacht Charters
• TMC Newsletter
• Employment Opportunities
• Mission Statement
• Affiliations

Catamarans For Sale

minimum    -   maximum

Log in or create an account to save searches, connect directly with your broker and get regular updates on desired boats and services.

Username or Email *

Remember Me

Lost your password?

Not a member yet? Register now.

• Login with google

Save or Modify Current Search

Found 879 yachts, catamaran 24.

• US$1,415,440

World Cat 320 DC

• Delray Beach

Fountaine Pajot Bahia 46

• Fort Lauderdale
• US$1,625,000
• Aegean Islands

Leopard 44 Sailing catamaran

Lagoon 420 owners version, invincible 40 catamaran.

• Miami Beach

Sunreef Power Catamarans

• US$4,999,999

Lagoon 52 F

Leopard 51 powercat.

• Cape Canaveral

Soubise Plaisance Soubise 50

Lagoon 450 f.

• Le Lavandou

Custom Mystique Yachts Silhouette 800

• US$4,950,000

Aquila 36 AHG CRUISER

Statement 360 cat, fountaine pajot lucia 40.

• Mar Tirreno

Dufour Catamarans 48

Invincible 35′ catamaran.

• Orange Beach

Nautitech 46 Open

• Redwood City

Gemini 105Mc

• West Palm Beach

Lagoon 450 s

• Road Town, Tortola

Fountaine Pajot Astrea 42

• Fernandina Beach

Leopard 53 Powercat

• US$1,690,000
• Saint Petersburg

Invincible 46 Catamaran

• Melbourne Beach

Fountaine Pajot Salina

• SABLES D OLLONNE

Seawind 1260

• Shelter Bay Marina

Fountaine Pajot Helia 44

Privilege serie 5, recent news, the multihull company announces the sale of the first pre-owned balance 482.

The Multihull Company is pleased to announce the closing on the Balance 482 "SeaLife" We wanted to take a moment and thank her new owners on their amazing new catamaran, and to also congratulate our team handling the sale. TMC agent Andrew Hodgdon successfully represented the buyers on the sale of the vessel, while TMC CEO Will Miller represented the...

THE MULTIHULL COMPANY ANNOUNCED AS DEALER FOR THE VOYAGE 590

The Multihull Company is pleased to announce their appointment as a dealer for Voyage Yachts and their new model – the Voyage 590!  The Voyage 590 is being celebrated as the ultimate, luxury sailing catamaran with all the comforts of home surrounded by panoramic views of paradise. She maximizes luxury accommodation and comfort, with the performance and blue-water capability characteristic...

6 Great Starter Catamarans

In early 2023, Cruising World approached us to seek our opinion on recommending a couple of brokerage catamaran options for first time catamaran buyers to consider when they first stepping into the catamaran market. Here are six boats hand-picked by The Multihull Company’s president and CEO, Capt. Will Miller, as excellent choices for brokerage-catamaran seekers. These are all worth a...

The Multihull Company Named Exclusive Dealer for Dolphin Catamarans and their New Model, the Dolphin 380

The Multihull Company, the world’s leader in multihull sales and service is excited to announce that it has been named the exclusive dealer for Dolphin Catamarans, a premier builder of high-quality catamarans, and their newest model, the Dolphin 380, designed by Philippe Pouvreau. "We are thrilled to be working with Dolphin Catamarans again and to be able to offer their...

Visit Us at the 2023 Miami Boat Show

The Multihull Company is thrilled to announce our participation in the Miami Boat Show, taking place on February 15-19, 2023. As one of the premier boat shows in the world, this event is the perfect platform for us to showcase our wide range of high-quality multihulls for sale.  We are committed to providing our customers with the best experience possible,...

Introducing the Tao 452: On Display At The Annapolis Boat Show October 12 – 15, 2023

The Multihull Company is thrilled to unveil the new Tao 452, an exciting addition to the world of blue-water performance cruising catamarans. Meticulously engineered and crafted to perfection, the Tao 452 is set to redefine the catamaran experience for sailors worldwide. If you've ever felt the need for more sailing performance from your current production charter catamaran or been disappointed...

Join Us At The Annapolis Boat Show Aboard the Voyage 590

The Multihull Company is excited to announce its participation in this year's Annapolis Sailboat Show. The event will be held from October 12 - 15, 2023 in downtown Annapolis, and The Multihull Company will be showcasing the exquisite Voyage 590 catamaran from Voyage Yachts. The Annapolis Boat Show is a highly anticipated annual event that brings together boating enthusiasts, industry...

Ian Edmonson Joins TMC As Yacht Broker in Fort Pierce, FL.

The Multihull Company is thrilled to announce the appointment of Ian Edmonson as a yacht broker at its newly opened Fort Pierce location. Ian brings a unique blend of boating passion, brokerage experience, real estate expertise, and customer-focused mentality to the team. Ian's love for boating began at an early age and has only continued to grow, leading him to...

The Multihull Company Opens New Office in Virginia

We are thrilled to announce that Alan Prater has joined The Multihull Company team as a Yacht Broker in Virginia covering the Hampton Roads area of Virginia. With a lifelong passion for the water and a career spent in the US Navy and as a maritime training professional, Alan brings a wealth of experience and expertise to our team. Alan...

• Read All Articles

We take pride in our happy customers

Your team delivered on every mark. You’ve got an amazing broker in Mark Wattrus and I’m confident you will have continued success moving forward together. He was available 24/7 whenever I had questions. We had a great initial visit on the boat and his marketing plan and photos were superb

I bought a yacht that I had never seen. I did this because I trusted my broker Andrew Holland. It was not an easy job for Andrew, as I am an experienced boat builder and owner of previous yachts, but work in West Africa. Imagine how hard it was to communicate what I was looking for. Andrew came up with exactly what I wanted. He dealt with time delays, all my questions at odd hours, and was there for the survey. He reported honestly and professionally. After buying the yacht, I arrived at the boat on a Sunday night, after dark, after travelling from West Africa to the Caribbean, and found it was better than expected. He never pulled punches and made me aware of shortfalls. I expected to spend my one month leave working on the boat, but actually spent less than one week, and was able to spend 3 weeks sailing – wonderful bonus.

Thank you Andrew for putting up with all my questions, all my worries and all my crazy out of the time zone concerns – you were totally professional, but also I know that if and when we meet up, it will be like a friend finally meeting. You are always welcome on Aseka.

— Beverly Cory

Outstanding company with professional subject matter experts. If I were to buy or sell cruising sailboat, particularly a catamaran, Andrew would be my go to broker.

I have been sailing since I was a child and attended Massachusetts Maritime Academy. But when my wife and I began the process of purchasing an ocean cruising/racing catamaran, I realized that this is a world unto itself. Obviously, we needed to find someone knowledgeable to help us make an informed decision. More importantly, we needed someone honest and willing to put our interests before his or her own. I was lucky to work with Phil Berman at The Multihull Company. He repeatedly shunned the fast buck, choosing instead to work the long road to connect us with the “perfect boat”. I would be glad to recommend Phil and his company to anyone planning to purchase or sell a performance sailing machine.

— Eric Boutiette

Andrew Hodgdon was our broker when we bought our 2018 Lagoon 450F in Antigua in April 2922. He provided great service and was very attentive to our needs. We would highly recommend Andrew and the Multihull Company.

Trust & Expertise About Us

Successful relationships cannot exist without it. At The Multihull Company we base every relationship on a firm commitment to earning and retaining our client’s trust.

Advice of any kind is valuable only when grounded in hard-won expertise. It too, must be trustworthy. Trust and expertise define the heart and soul of The Multihull Company. We are a team of skilled professionals who thrive on providing expert, trustworthy advice and service to catamaran and trimaran sailors around the globe.

Follow us @themultihullcompany

• Pre-Owned Sales

Global Locations

New England +1-267-324-9067

Philadelphia +1-215-508-2704

Virginia +1-757-407-2526

Annapolis +1-703-350-8160

Charleston +1-843-364-4123

Brunswick +1-937-243-2213

Saint Augustine +1-910-477-2508

Fort Pierce +1-904-315-0997

West Palm Beach +1-561-312-0010

Ft. Lauderdale +1-484-744-2740

Miami +1-513-677-5338

San Francisco +1-215-508-2704

Seattle-Tacoma +1-206-297-1151

St. Martin +590 690 58 66 06

Grenada +1-473-457-3245

Puerto Rico +1-787-379-7348

Panama +1-305-735-1661

Trinidad +1-868-680-8909

Croatia +385 95 849 8009

France +33 (0) 6 73 97 17 30

Mauritius +1-215-508-2704

Australia +61 (0)7 5444 4822

Cape Town +1-843-614-2028

© Copyright 2024 The Multihull Company. All rights reserved.

Professional BoatBuilder Magazine

An aluminum expedition catamaran.

By Dieter Loibner , Apr 5, 2022

With 110′ LOA, a 35′ beam, and 45′ (33.5m, 10.6m, and 13.7m) of bridge clearance, the H-2 catamaran seeks to make a case for U.S. custom boatbuilding.

Hauling toys beyond the horizon is the raison d’être for a rugged go-anywhere catamaran designed and built in the U.S., a notable exception in the world of big yacht projects.

Gunboat might have left town, but there’s another big catamaran under construction in its old facility in Wanchese, North Carolina. It’s called H-2 , short for Hippocampus 2 , a stout 110-footer (33.5m) that liberally and intentionally quotes from the expedition/workboat vernacular. It’s built from aluminum and was conceived to go to the back of the beyond, where adventure beckons and Vessel Assist doesn’t operate. Aside from commodious and cushy accommodations, the boat offers grid autonomy, ocean-crossing range, and cargo capacity to match the mission of hauling a 26 ‘ (7.92m) tender, a 17 ‘ (5.8m) skiff, a two-person submarine, a four-seat ATV on the main deck, and a small helicopter on the flight deck aft.

The boat was commissioned by Brian Schmitt, 67, a real  estate executive in the Florida Keys, who pilots his own plane to commute to the Bahamas, where he keeps Hippocampus , his current 57 ‘ (17.37m) cold-molded wood/epoxy catamaran. I asked him about the jump from 57 ‘ to 110 ‘ . “I never thought I’d have the ability to do that in my own boat until probably the last few years,” he replied, adding that “it would be 120 ‘ [36.58m] if I had to do it today.”

Its predecessor, Hippocampus, built in wood/epoxy, was launched in 2003. At 57′ (17.37m), it is about half as long as H-2, but with 22,500 miles under its keels, it was a useful starting point for designing the new vessel.

Wearing shorts and a shirt with the new boat’s name and logo to our meeting, Schmitt talked openly about his project, which he manages as attentively as his real estate brokerage with 130 agents. Communication is his thing, responding to e-mail questions in near real time (in ALL CAPS) and talking to contractors directly. No project manager.

A passionate diver who habitually explores remote and exotic locales, Schmitt said he was happy with the first Hippocampus , which has three staterooms and cruises at 15 knots on twin 370-hp Yanmars. “It was the vehicle that got our 17 ‘ tender wherever we needed it.” But running the little boat 60 or 70 miles a day lost its charm. “One of the things I wanted was a twin-engine tender that would have more room for dive gear. That ended up being a 26 ‘ Calcutta, so I needed a bigger mother ship.”

With accelerating climate change, the carbon footprint of ships and large yachts is under scrutiny, but hydrocarbons still win when speed, range, and payloads are priorities. While H-2 doesn’t break the mold there, Schmitt pointed to the project’s virtues as a U.S. domestic build. “You can’t complain about global warming when you’re flying around in your G500 jet that’s contributing more CO2 emissions than anybody else in the world,” he said. “You can’t complain about all the boats being built in Germany, The Netherlands, and Italy, and then go buy a boat [there].” Schmidt wanted to build locally, keeping jobs and money in the U.S. Besides, he noted, this approach simplified communications and enabled him to personally check on progress during COVID. Perhaps most importantly, he could pick a team of trusted and compatible mates to turn his dream into a boat.

The vast build hall left vacant when Gunboat left Wanchese, North Carolina.

He selected John Marples, a fellow pilot, inventor, and multihull specialist for the design and Felix Herrin to build H-2 . Both men had worked for him on Hippocampus , and their familiarity helped when meeting today’s challenges, such as damaging trade tariffs that drove up aluminum prices, and a pandemic that killed millions, wreaked havoc on global supply chains, and caused labor shortages in industrial sectors. These factors have conspired to delay H-2 ’s launching by roughly two years and counting.

Advantage Aluminum

A key decision early on was to build in aluminum, which promised a robust structure but required extra steps to deal with corrosion and noise mitigation. “Construction was reduced to something simple—a V-bottom deadrise model, stretched out,” Marples explained. “There wasn’t any benefit to round bilges on an aluminum boat. You’d have to add internal structure to support the flat panels, and it drives the cost and difficulty of construction way up. We’re talking about a speed-to-length ratio of 2 or less, which is not a big deal. His current boat would do a speed/length of about 3, so the extra length means that you’re never really pushing the boat that hard, so shape was not a huge consideration.”

Marples and Herrin go back at least three decades to their mutual acquaintance with naval architect and boatbuilder Dave Dana, who assisted Marples with the hull design for Admiral Pete , a catamaran passenger ferry still serving Puget Sound. Herrin works with different construction materials, but having built crew boats for Petróleos de Venezuela (PDVSA) at Sea Force in Palmetto, Florida, he has spent considerable time with aluminum.

Taking a break during IBEX 2021 are builder Felix Herrin (left) and owner Brian Schmitt. H-2 is their second joint project with designer John Marples.

The structural components on H-2 are 5083-H32 alloy aluminum plate and extrusions of 6061-T6 alloy. Scantlings, materials, and weldment comply with the American Bureau of Shipping’s (ABS) 2016 design guidelines for pleasure motoryachts. Hulls and wing structures have transverse frames and bulkheads spaced on 36 “ (0.91m) centers. Those frames are supported by substantial centerline vertical keels (CVKs) welded atop twin 3 “ x 8 “ (76mm x 203mm) solid extruded-aluminum-bar keels. Intermediate subframes in the forward and aftermost hull compartments strengthen the hulls for operating in ice. Schmitt indicated he wants to traverse the Northwest Passage. For the same reason, there’s 3⁄8 “ (10mm) plate running the length of the boat above and below the waterline.

The topside and underwing plating is primarily ¼ “ (6mm), with areas of 5⁄16 “ (8mm) to strengthen slamming zones in the bow. The main deck plating is also 1/4 “ while the foredeck plate is specified at 5⁄16 “ . The bottom plating is 5⁄16 “ in the aft two-thirds of the hull and 3⁄8 “ forward. “We built all the frames and bulkheads first, then scarfed together the keel sections [and] lined those up on the bunks that we built on,” Herrin explained. “We welded the CVK on top of the keel, then started installing frames.”

Hulls and wing structure have transverse frames and bulkheads on 36″ (0.91m) centers. The hulls are supported by centerline vertical keels.

Herrin said he changed aluminum suppliers midway through the project, sourcing from Bayou Metal Supply , an ISO 9001:2015–certified distributor in Slidell, Louisiana. “We sourced the material from Greece and from domestic suppliers,” said Taylor Smith, who handles Bayou’s sales. Tariffs, he said, did not slow down business much, but the aluminum cost more. “Felix sent cut files. We had the material in inventory, we cut it, processed it on a router, and shipped it on time. Everything flowed well.”

Naval and structural engineering and detailing was contracted out to Van Gorkom Yacht Design in Portsmouth, Rhode Island. “My first responsibility was looking at structures,” Geoff Van Gorkom said. “Given that this is an aluminum yacht, we can do literally all the structures in 3D and have all the metalwork precut before it came into the yard. All the frames and longitudinals and all the primary structure were precut, which saved huge amounts of time.” Van Gorkom said he uses Rhino 3D and some of the numerous modules such as Orca 3D for hydrostatics and hydrodynamics, and 2D AutoCAD to produce construction details.

Helping save time and money, 3D-modeling allowed frames, longitudinals, and the primary structure to be cut before being sent to the building site.

Van Gorkom observed that H-2 is not a fussy high-performance vessel that needs minimum weight to achieve maximum speed. Besides ABS guidelines that address torsional loads in catamaran structures, he also consulted A.L. Dinsenbacher’s paper “A Method for Estimating Loads on Catamaran Cross-Structure” ( Marine Technology , Vol. 7, No. 4, October 1970) to estimate load conditions in beam and quartering seas. “This is going to be a very stiff boat. It’s going to be a very strong boat simply because it has to be, and that was one of the criteria that Brian put out there right from the very start of the project. The boat is sturdy and stout, a strong expedition yacht.”

Van Gorkom also engineered the setup for a folding deck crane housed under a flush hatch in the helideck on the port side to launch and retrieve the two-man submarine or the ATV. “It’s basically an enclosure that opens up, so the crane extends out,” he explained. “It comes up on a telescoping pipe to swing out and pick up something from the side of the boat.” It required support from beams on each side of the crane and cutting a slot in the helideck for the lifting bridle so the loads can move inboard or outboard. On the starboard side, the 5,500-lb (2,492-kg) Calcutta tender is an even heavier load moved by twin overhead beam cranes. The 17 ‘ Twin Vee is launched and retrieved from the foredeck with a 2,500-lb-capacity (1,153-kg) crane.

Catamarans are known to be weight-sensitive, so how will H-2 handle the weight of all the toys and high superstructure? The arch over the flybridge is 33 ‘ (10.05m) above waterline, Van Gorkom confirmed. “Add another 10 ‘ [3.05m] for the radar, mast, etc., so a comfortable bridge clearance would be around 45 ‘ [13.7m].” Marples conferred with Van Gorkom about the effect of the added weight on the center of gravity, which was deemed “almost imperceptible,” Marples remembered. A quick calculation suggests that a 5,500-lb deck load is equal to only 1.57% of a full-load displacement given as 350,000 lbs (158,550 kg).

High Power, Low Noise

Van Gorkom hired engineers at HydroComp to evaluate the design’s hydrodynamics and propulsion systems, including the influence of hull-shape parameters and demi-hull spacing on resistance. HydroComp also offered a speed-power prediction to aid with engine selection and recommended optimum shaft rpm and propeller parameters. Technical director Donald MacPherson, who prepared the report, outlined the process and findings: “Particularly interesting for this project was the use of its novel analytical distributed volume method [ADVM] for the vessel’s resistance modeling. This 2D technique (between parametric methods and CFD) uniquely allows for assessment of the influence of local sectional area curve regions (such as ‘shoulders’ or inflections) in wave-making drag. It also directly evaluates the effects of catamaran hull spacing.” HydroComp helped optimize the hulls by identifying the regions that contribute most to wave-making drag, and securing a 3% reduction in total drag at the design speed by making what MacPherson called “very minor changes to the immersed volume distribution.”

Rob Ayers works on the installation of the starboard engine’s Evolution Marine Shaft System that will be fitted with a 36″ (0.91m) five-blade propeller.

That simulation was mapped to benchmark performances of four similar catamarans, and the process was run for two design variants, followed by a propulsion simulation for partial-load conditions. The hull-spacing study concluded that the originally designed 35 ‘ (10.7m) beam remained suitable despite the boat being 20 ‘ (6.1m) longer than originally drawn. The chosen propulsion system comprises two MTU 10V 2000 M96, 1505-mhp diesels with ZF 3000 flange-mounted marine gears, providing an estimated top-speed range of 20–22 knots, cruising speeds of 12–15 knots, and 10–13 knots for long-range voyaging. Actual performance will be established during sea trials.

The recommended propeller specifications developed by HydroComp were for five-blade models with 36 “ dia­meters. HydroComp applied Prop­Elements, a wake-adapted propeller-analysis tool, to determine the advisability of installing a nozzle or shroud to restrict transmission of pressure pulses to the hull and to create a more uniform inflow. This would reduce interior noise but would increase appendage drag and power demand. Schmitt said he will wait to see if cavitation or prop noise is an issue before making a final decision.

He invested heavily in noise and vibration mitigation, knowing that an aluminum boat won’t provide the natural sound-dampening of a wood/epoxy structure like that of his first Hippocampus . Consulting with Soundown of Salem, Massachusetts, Schmitt wanted to replicate what worked well on his old boat, starting with the Evolution Marine Shaft System, in which the prop shaft runs in an oil-filled tube and uses roller and needle bearings instead of standard water-lubricated bearings. “You have a lot less shaft noise, but one of the primary benefits of an integral thrust bearing is that it transmits all the thrust directly into the hull, as opposed to pushing on the gearbox or the engine and gearbox combination,” said Sam Smullin, Soundown’s marketing and quality assurance manager. “It allows for a much softer engine mounting, so you reduce the noise from the shaft itself and get a much quieter engine installation, which reduces structure-borne noise.” Because of the relative weight sensitivity of catamarans, Smullin said, “it’s particularly important to do a really good job on the driveline.” His father, Joseph Smullin, president of Soundown and J&A Enterprises Inc., an engineering firm for noise and vibration control, estimated that this could reduce driveline noise levels by 5 dBA to 10 dBA compared to a conventional system.

Clemente Perez, one of Herrin’s build crew, works on the interior. The extensive sound and thermal insulation includes foam sprayed into the cavities.

Soundown also looked at the two 38-kW Northern Lights gensets, which have double-isolation mounts to reduce structure-borne noise. The firm also recommended structural changes to ensure that the mount foundations were as stiff as possible.

Energy from propulsion or generator engines invariably transmits to the boat structure and then resonates through big, flat panels like bulkheads, decks, ceilings, and liners, causing the familiar vibrating rattle. To dampen those vibrations, Herrin said he used Roxul, a lightweight, semi-rigid stone-wool insulation for fire resistance and sound control. His crew also sprayed cavities with Dow Froth-Pak, a quick-cure polyurethane foam for thermal insulation, and installed Sylomer (a microcellular PUR-elastomer) between the structural components and the floors, walls, and panels. “We glued the Sylomer, which is kind of a spongy foam, to the structure of the boat, and then the plywood of the subfloors and walls are glued to that,” Herrin explained, adding that this created a floating interior without any fasteners.

The plywood, called QuietCore, is a composite sandwich panel comprising marine plywood skins and an acoustic damping layer that converts acoustic energy into small amounts of heat that are dissipated. Soundown claims that an 18mm (0.7 “ ) QuietCore bulkhead can reduce noise transmission by up to 10 dBA, an audible reduction 50% greater than with regular marine plywood of equal thickness.

Electricity for a Small Town

Going off grid on H-2 does not mean anyone will suffer, as long as the electrical system keeps powering the boat’s myriad house loads—hydraulic Maxwell windlasses and thrusters; a Webasto air-conditioning system; two full-size stand-up freezers, two refrigerator freezers, and two under-counter refrigerators in the galley, all by Vitfrigo; Krüshr compactors for recyclables and garbage; Headhunter sewage-treatment system; Alfa Laval fuel-polishing system; two FCI watermakers; a complete set of Garmin navigation electronics with full redundancy; and a Böning vessel control and monitoring system.

Two Northern Lights 38-kW gensets are the heart of H-2’s AC system, which also includes a 37-kW Atlas inverter to connect to shore power in foreign ports.

Much of the AC side was designed and specified by Ward’s Marine Electric in Fort Lauderdale, Florida, in cooperation with OceanPlanet Energy of Woolwich, Maine, and principal Bruce Schwab, who helped design and integrate the DC components. “Today there’s a big trend in the industry to use shore-power converters as inverters and superlarge lithium-ion battery banks to provide power, at least temporary power, for major loads like air-conditioning, chiller plants, and things like that,” said Ward Eshleman, chairman of Ward’s Marine Electric. “So, rather than using only smaller inverters and synchronizing them and stacking to get additional kW, the trend for the larger vessels is to use shore-power converters as inverters. There is an inverter bus in the main switchboard.”

True to its go-anywhere mission, H-2 was fitted with an Atlas 37-kW inverter to connect to shore power in places that do not serve 60 Hz, 240V single-phase power. “We can take anything from 90V to 400V and pretty much anything from below 50 Hz to the 60 Hz and single- or three-phase,” Herrin explained.

Eight GTX24V315A-F24 lithium-ion batteries from Lithionics are split between a house bank that can run all DC loads for at least 24 hours, and an emergency bank to operate critical DC loads—display screens, radios, nav lights—for 24 hours. The boat is equipped with 10 Solara Ultra-S 160W panels paralleled in two groups of five each, connected to two Victron SmartSolar MPPT 100/50 solar controllers to charge the house bank. Given enough sunshine, solar and battery power should be “capable of running lights and refrigeration but not air-conditioning or heating,” Schmitt said. “Since we will likely spend most of our time in the tropics, we did not believe that solar power alone could do the job we needed.”

OceanPlanet Energy specified four Victron Buck-Boost DC-DC converters, two for each engine, to help charge the house bank from the starter batteries without having to modify the engines’ stock alternators, which would have voided the warranty. “The converters activate based on the input voltage from the starting batteries,” Schwab explained. “With lower rpm, the alternators would not produce enough current to feed both converters without the starting-battery voltage dropping, turning the converters off. Then the voltage will rise, the converters turn on again, drop the voltage, turn off…over and over. Staggering the input voltage cut-in, hopefully starting the converters one at a time, will more smoothly supply power to the house bank across the engine/alternator rpm range.”

OceanPlanet Energy specified the DC system including DC/DC converters and hefty battery banks to power house loads and critical electronics.

There are two 4,500-watt 240V split-phase engineroom-ventilation fans connected to two Victron Quattro 5-kW 24V inverter-chargers configured for 240V/120V split-phase AC loads. They can accept AC inputs from two sources (shore power or generators) and automatically connect to the available source. “In the event of a grid failure or power disconnect, they take over the supply to the connected AC loads by inverting from the Lithionics house-battery bank,” Schwab said.

“It’s more complicated than that,” according to Herrin. “Typically, we’re going to be operating with the A-bus and the B-bus tied together, so we can power everything with one generator. The B-bus actually passes current through the Victron inverter-chargers on its way to the load. We have the ability to split the A-bus and the B-bus and run the A-bus on one generator and the B-bus on the other in the few instances we’re exceeding the capacity of one of the generators. If we lose both generators, then the essential loads are still going to be carried,” meaning engine vents or water pumps.

Redundancy and emergency backups also figured largely in the deliberations of John McKay, manager of the Switchgear Systems Division at Ward’s Marine Electric and point man for this project.

One of his challenges was limiting the voltage drop in the estimated 53 ‘ (16.2m) cable run between engines, which in an emergency allows the starboard engine to be started from the port battery and vice versa. “For a starter group, you can allow a 20% voltage drop,” McKay said and noted that starting the engines requires 720 amps, while the gensets needed only 200 amps. “I was keeping the 720-amp current between 7% and 11% voltage drop, getting up to some pretty good-sized copper. Some sections of the run were 240mm2 [500MCM] cable.” Knowing that the boat is capable of going to high latitudes, McKay recalled his youth and the frigid winter mornings in Massachusetts, “where you can crank a diesel all day long at a low rpm, and it’ll never start. You just need to turn it over one or two times at a higher rpm, and it’ll be running. So, I was making certain that the starter was going to crank at the highest rpm possible and not lose it all to voltage drop.”

Protecting Assets and Finishing the Job

No matter how fast or how far H-2 will travel, corrosion caused by galvanic current between dissimilar metals, by stray currents or by electric fault, is an enemy that needs to be kept in check. That’s the calling of Ted Schwartz, who runs Electro-Guard (Mount Shasta, California). He’s one of the country’s foremost experts on cathodic protection, and also served on ABYC’s E2 Cathodic Protection Project Technical Committee.

“We designed the system and supplied all the equipment and steered them through the installation,” Schwartz said. It’s a 15-amp impressed-current-cathodic-protection (ICCP) system, model 715 A-2, with three anodes and two reference cells. Regarding the boat’s Evolution shaft system with driveshafts running inside an oil-filled tube, Schwartz said: “It was a real challenge because you can’t actually make contact with the propeller shaft on the inside of the boat.” He consulted with Soundown and found a solution. “At the coupling on the inboard end of the tube, a bit of the shaft stuck out through the seal,” Swartz said. “There’s this coupling that Soundown built that fastens to the shaft, and we asked them to provide a surface on that coupling where we could put our silver slip rings on [to provide an electrical connection] to protect props and shafts.”

Every anode can deliver up to 5 amps of current using its own current controller that receives a signal from the main controller, which determines exactly how much current each anode will put out. The entire system consists of three anodes, three current controllers, the main controller, and a separate monitoring station connected to the controller by signal cable. Later, Schmitt also ordered a backup system employing aluminum sacrificial anodes.

On catamarans, the company installs a reference cell aft near the prop of each hull, and an anode on the aft section of each hull, and one anode amidships on the inboard side on one hull.

Chromate, two layers of epoxy, copious amounts of fairing compound, and various primers rendered the surface fair and ready for a yacht-quality paint job.

At the time of this writing, the vessel had been shot with chromate and two layers of epoxy before approximately 500 gal (1,893 l) of fairing compound and 325 gal (1,230 l) of various primers rendered the surface fair and ready for a yacht-quality Alexseal paint job with 35 gal (132.5 l) light ivory, 24 gal (91 gal) stark white, and 2 gal (7.6 l) cordovan gold. Parallel to the exterior, construction was on the home stretch with installation of the crew quarters and the saloon overhead. On the systems side, pressure checks were performed for hydraulics and plumbing.

Since H-2 is a much larger and more complex vessel than the original Hippocampus , with a multitude of systems that need to be managed, monitored, and maintained, I was curious how many crew Schmitt was planning to hire to help run his new boat. He said he consulted with captains and headhunters, and “the consensus is three or possibly four at most. I just completed my 100-Ton Masters and will build time on the new boat as well. We won’t charter and are not accustomed to being cooked for or served or having our beds made and all that. So mostly I’m looking for a qualified captain and engineer to maintain the systems.”

Little surprise that a hands-on operator like Schmitt does not want to cede too much of the game he loves to play. But as big, bold, and broad-shouldered as H-2 will be when she finally emerges from the old Gunboat shed in Wanchese, the proud owner is quick to remind anyone that it’s still “a vehicle to get the toys wherever.”

H-2 : The Designer’s View

H-2 ’s owner, the adventurous Brian Schmitt, has dived into deep caves to see submerged caverns, hand-fed large sharks that would normally view him as food, and spent years in his off-time exploring Caribbean archipelagos in Hippocampus, his current 19-year-old 57 ‘ (17.4m) power catamaran. Nearing retirement age, he gave the order for his “ultimate” yacht.

The foldable hydraulic deck crane to launch and retrieve a two-man electric submarine or an all-terrain vehicle required cutting a slot in the helicopter deck for the lifting bridle.

The first talk about the new design was between the owner, the builder, and me. As we discussed the mission of the boat, it became clear that it would fall into the category of expedition vessel with more guest staterooms, more range, and more room for equipment than his old boat. Brian defined the function of the vessel as a carrier for a 26 ‘ (7.92m) twin-outboard catamaran, an outboard skiff, a small car, and a small helicopter, which needed a flight deck. This vessel was to be used with family and guests while also serving as an operations base for outbound travel by air, land, or sea.

Aside from commodious accommodations, a key requirement was comfortable motion on rough seas. This was to be a catamaran, like his current boat, which offers extensive real estate afloat in a seagoing vessel. The only restriction for the new design was a beam no greater than 35 ‘ (10.6m) to fit the largest Travelift.

The trade-off for overall beam width involves room versus roll motion. A wider catamaran responds more quickly to roll in seaways but with less amplitude, whereas a narrower beam rolls more slowly with slightly more amplitude. The slower roll is preferable as long as overall roll stability is maintained. Roll in catamarans is unlike roll in single-hulled vessels. Because the vessel is supported by two buoyancy chambers (hulls) with distance between them, motion has little to do with roll inertia, but rather with response of the hulls to the seaway. Each hull responds to a passing wave independently by heaving (up/down) and rolling, which is a circular motion around the center of gravity (CG) that translates to lateral motion when standing above the CG, especially high up on the bridge. Power catamarans, unlike sailing catamarans, do not require wide hull spacing to generate righting moment (to support a sail plan), so they can have closer hull spacing, which still preserves sufficient stability, slows wave-response roll characteristics, and takes up less space in port.

One of the expected routes for this vessel is the Northwest Passage over the top of North America. Boats venturing there can expect floating ice, so we added thicker hull plating at the waterline and an ice-separation chamber on the cooling water intakes. We also designed the hull to give the propeller protection by positioning it behind a deep canoe-stern afterbody with no exposed shaft. A rudder horn, below the propeller extending aft from the hull, adds support for the rudder and protection for the prop. This configuration is useful as a hedge against the possibility of grounding. In fact, this boat can be careened on the beach between tides if necessary for repairs. The hull includes a strong, deep, vertical keel structure that allows for blocking anywhere along its length.

Speed and range became the largest determinates of the design. A maximum range of 4,000 miles at 15 knots (enough to cross the Atlantic Ocean) was proposed. Catamarans are easily driven at modest speeds due to lack of significant wave resistance by narrow hulls. A preliminary speed prediction analysis showed that we would be in the ballpark with about 1,400 hp (1,050 kW) and 5,000 gal (18,925 l) of diesel per hull. The final installed fuel capacity is 12,500 gal (47,313 l).

The general arrangement plan shows crew quarters in the hulls, three guest cabins, office, saloon, and galley on the main deck and owner’s suite on the bridge deck level.

A totally new design normally goes through a lengthy proposal and critique cycle between designer and client, especially if the client is knowledgeable and involved. The vessel’s first iteration started at 90 ‘ (27.43m) LOA, but it became evident that it needed more length to relieve a number of ills. After adding 10 ‘ (3.05m) we saw improvements, but it wasn’t until the 110 ‘ (33.5m) length proposal that we felt all the requirements had been satisfied: more slender hull shape, more open interior space, and better placement of machinery and tankage. The flight deck for the helicopter became larger, and the forward superstructure fairings gave the boat a sleeker look. And at 110 ‘ we achieved an efficient length versus waterline beam ratio that reduced wave drag and fuel consumption at the target cruise speed.

While beam remained at 35 ‘ , lightship displacement increased significantly to 230,000 lbs (104,190 kg). Accommodations now include crew quarters for four persons in the bows; three double guest cabins and a ship’s office forward; a large saloon amidships with adjacent galley, and a dive and a storage locker aft on the main deck. The upper deck is arranged with a full-width-bridge steering station forward, protected by a Portuguese bridge, and a master stateroom with en suite bathroom aft. The flight deck extends aft of the master stateroom. Access to the upper deck is by either a staircase from the foredeck, an interior staircase adjacent to the ship’s office, or by stairs from the starboard side deck.

The largest variable weight on the boat is fuel, so the tankage is located amidships to minimize its influence on trim. Engine and machinery rooms aft of the tankage take up the remaining spaces all the way to the transoms. Other amenities include a utility area aft of the crew quarters port side with storage and washing machines, and a walkway through the tank spaces and enginerooms to the boarding decks at each transom. Another late addition is the flying bridge to aid with shallow-water operation by improving the vantage point to see coral heads and other obstructions. Its protective bimini serves as a mounting platform for lights and antennae.

—John R. Marples

Read more Construction , Design , Drawing Board , Yards articles

• CNC Construction on the Rise

How computer-aided design and software-controlled manufacturing technologies have reshaped custom and semi-production boatbuilding.

Hull Vane: A Wing With Benefits

Typically, military ships are designed and built for specific missions, not to curb their carbon footprint. However, if the Dutch navy serves as an example, that is about to change…. Read more »

Reid Bandy, the Carbon Minimalist

Reid Bandy designs and builds a stripped-down superefficient carbon fiber sportfisherman.

Recent Posts

• Learn Electrical Systems from Nigel Calder
• PRO-SET Epoxy Named an Official Supplier for New York Yacht Club American Magic, Challenger for the 37th America’s Cup
• Marine Trade Education News
• Sea Hawk Paints’ Colorkote is ‘reinventing the art of antifouling’
• Companies (82)
• Construction (105)
• Design (156)
• Drawing Board (8)
• Education (24)
• Environment (15)
• Events (20)
• Materials (48)
• Obituary (17)
• People/Profiles (46)
• Products (16)
• Propulsion Systems (30)
• Racing (15)
• Repair (37)
• Rovings (313)
• Short Cuts (3)
• Sponsored Partner News (13)
• Systems (80)
• Task Sheet (1)
• Uncategorized (26)
• Wood to Glass (7)

ProBoat.com Archives

Our Listings

• 39 Inquiries
• 2,090 Views

SUNREEF 114 ft Type: Sail | Condition: Launched Model: Sunreef 114 Launched Gdansk Poland

"PAJOT 110 CUSTOM"

• 68 Inquiries
• 3,047 Views

ECO YACHTS 110 ft Type: Sail | Condition: New Model: Eco Yacht 110 Catamaran for Sale Ancona Italy

• 115 Inquiries
• 1,081 Views

2009 SUNREEF 102 ft Type: Sail | Condition: Launched Model: Sunreef 102 Catamaran for Sale Call Italy

"SUNREEF 92 DOUBLE DECK NEW BUILD"

• 18 Inquiries
• 1,328 Views

SUNREEF 92 ft Type: Sail | Condition: Launched Model: Sunreef 92 DD Launched Gdansk Poland

• 176 Inquiries
• 17,944 Views

2012 SUNREEF 82 ft Type: Sail | Condition: Used Model: Sunreef 82 DD Catamaran for Sale Cannes France

• 13 Inquiries

SUNREEF 82 ft Type: Sail | Condition: Launched Model: Sunreef 80 Carbon Line Launched Gdansk Poland

"MAGIC CAT 83"

• 37 Inquiries
• 1,154 Views

1995 MULTIPLAST 82 ft Type: Sail | Condition: Used Model: Magic Cat 82 Catamaran for Sale Sètes France

"SUNREEF 80 POWER ECO YACHT"

• 35 Inquiries
• 1,253 Views

SUNREEF YACHTS 80 ft Type: Power | Condition: New Model: Sunreef 80 Power Eco Catamaran for Sale Factory Poland

• 8 Inquiries

2021 SUNREEF 80 ft Type: Power | Condition: Used Model: Sunreef 80 Catamaran for Sale

"SEACLUSION"

• 5 Inquiries
• 1,601 Views

2020 SUNREEF 80 ft Type: Sail | Condition: Used Model: Sunreef 80 Catamaran for Sale Fort Lauderdale Florida

"READY NOW"

2023 SUNREEF 80 ft Type: Power | Condition: New Model: Sunreef 80 Power Catamaran for Sale Gdansk Poland

• 11 Inquiries

1991 CUSTOM US BUILT 80 ft Type: Sail | Condition: Used Model: Morelli/Miller Catamaran for Sale Phillipsburg St. Martin

• 4 Inquiries

2016 GUNBOAT 78 ft Type: Sail | Condition: Used Model: Gunboat 78 Catamaran for Sale

2019 LAGOON 78 ft Type: Power | Condition: Used Model: Lagoon Seventy-8MY Catamaran for Sale Ho Chi Minh City Vietnam

"KINGS RANSOM"

• 73 Inquiries
• 6,078 Views

2008 MATRIX YACHTS 76 ft Type: Sail | Condition: Used Model: Silhouette 760 Catamaran for Sale Tortola British Virgin Islands

SUNREEF 74 ft Type: Sail | Condition: Launched Model: Sunreef 74 Launched France

"BLUE DEER"

• 9 Inquiries

"19TH HOLE"

• 12 Inquiries

SUNREEF 74 ft Type: Sail | Condition: Launched Model: Sunreef 74 Launched Italy

• 2,232 Views

2018 SUNREEF 74 ft Type: Sail | Condition: Used Model: Sunreef 74C Catamaran for Sale Hollywood Florida

• 42 Inquiries
• 3,223 Views

2010 PRIVILEGE 74 ft Type: Sail | Condition: Used Model: Privilege 745 Catamaran for Sale Fort Lauderdale Florida

"SOVEREIGN"

• 28 Inquiries
• 3,753 Views

2006 LIDGARD 73 ft Type: Sail | Condition: Used Model: Executive 73 Catamaran for Sale Gloucestar Virginia

• 7 Inquiries

2012 SUNREEF 71 ft Type: Sail | Condition: Used Model: Sunreef 70 Catamaran for Sale Honolulu Hawaii

"ALMA DIVA"

2022 SUNREEF 70 ft Type: Power | Condition: Used Model: Sunreef 70 PC Catamaran for Sale Palma Spain

"OCEAN VIBES"

• 3 Inquiries

2020 SUNREEF 70 ft Type: Sail | Condition: Used Model: Sunreef 70 Catamaran for Sale St Thomas U.S. Virgin Islands

"BLUE BELLY"

SUNREEF 70 ft Type: Power | Condition: Launched Model: 70 Sunreef Power Launched Gdansk Poland

SUNREEF 70 ft Type: Power | Condition: Launched Model: 70 Sunreef Power Launched Mexico Mexico

• 31 Inquiries
• 1,410 Views