• Canoe Sailing
  • Kayak Sailing
  • Dinghy Sailing
  • Snark Car-Topping Sailboats
  • Canoe Stabilizers (Outriggers)
  • Rowboat & Porta-Bote Sailing
  • Parts and Accessories
  • Boats (without sail rigs)
  • Motor Mounts
  • Portage Carts
  • Small Outboards
  • Specialty Boats
  • Shopping Guide
  • Testimonials


Details & Specifications


Occupants: 1 - 2

Weight limit for people gear: 310 lbs

Hull length: 11 feet

Hull width (beam): 3 feet 2 inches

Hull weight: about 43 lbs

Fully rigged weight: about 50 lbs

Hull material: EPS foam core (no voids) with vacuum formed ABS polymer armorclad skin for both cockpit and exterior.

Sail area:  about 45 square feet

Sail type: Lateen

Warranty:  6 months against manufacturer defects

snark sailboat hull

The Super Snark Hull shown without any rigging.

Whats Included

Complete sailboat including:

Hull with mast socket and rudder mount

Mast, Sail, Boom, Spar, and ropes 

Rudder, Tiller, and Rudder Pin

Daggerboard (like a centerboard or keel)

All necessary hardware

Owners Manual ( download copy )

Snark Learn-to-Sail Instructions

Link to SailboatsToGo's exclusive Snark assembly video

Hull colors :  Super Snark hulls are white inside the cockpit and either blue, red or white outside.  Sorry, the manufacturer does not provide an option to choose your outside color and we cannot predict what it will be.  Sunflower  hulls are always yellow outside.

Sail colors :  There will be a colorful sail packed with the boat.  We can't predict the design of that sail, but we can assure you it will be color-coordinated with the hull outside color.  

Sail Swap option : If you want to choose a sail design, you can, no additional charge! How about a pirate sail ! We will mail your chosen sail ahead of the boat delivery, and then you will send back to us the sail packed with the boat.  The post office provides suitable envelopes for free and your postage cost will be about $5 to $7. 

We offer 7 different nylon sail designs for the Sail Swap . You can choose one at no additional charge: Click Here  to see the options. Nylon is durable, easy to fold, and is the material that has been standard for Snark sails for 50 years.  

Dacron (polyester) is a premium sail material, almost universally used on bigger boats for the main sail, because it holds its airfoil shape better in a strong wind. Theoretically, this should be better for upwind performance. We offer dacron sails for the sail swap at $29 extra for white or $70 extra for multi-color with premium-quality workmanship. For white Dacron  Click Here . For the multi-color Dacron sails Click Here , You can choose from either our Pastel Corners or Candy Stripes dacron sails.

Questions?  Email [email protected] or phone Jim at 1-978-263-7598 

Ordering a Super Snark

Click the "Add to Cart" link below. You can then check out or continue shopping for  Snark Options and Upgrades  or any of our other products. 

You can also click "Add to Cart" just to see the price.  No obligation. Shipping is not included.*

Add to Cart

We will contact you with actual shipping cost and get your approval  and you'll have the opportunity to cancel.  Pick up in Adrian, MI if you want to avoid shipping cost.  We will arrange it with you and the factory.

Phone orders or questions: Call 1-978-263-7598 or toll-free at 888-JOY-SAIL.

Sorry, returns without just cause cannot be accepted due to the manufacturer's policy.  

Shipping is done by small carriers.  Each order is put out to bid.  Usually it is in the $400 to $800 range.  You'll be given an opportunity to cancel before being charged for shipping.

To order, click the Add to Cart button above. You will receive an order confirmation by email. .

When the boat reaches your area, the trucker will call to set up a delivery appointment so you can be there to inspect the boat and sign for it. In the unlikely event your boat arrives damaged, contact us immediately, while the trucker is still there.  617 645 1605 is our number..     

Sail Swap and more Ordering Details

Before you check out, visit our  Sail Swap  page and select your sail if you want to exchange the sail that will come with your boat for one of our sails.  This will add the sail to your cart at no additional cost. Then, with your  sailboat and any other options or upgrades you want also in your cart, proceed to checkout. When you checkout there will be an "order comments" space near the top left of the screen. Write any important messages to us there.   After completing the rest of the order page, click the "process sale" button. You will see a confirmation screen with a button to display your invoice. A confirmation will also be sent to the email address you entered.

Options and Upgrades

In addition to the  Sail Swap  option, we also offer several add-on products for the Snark line including a rowing rig, stabilizer pontoons to help prevent tipping, an extension to raise the sail higher giving you more headroom, portage carts, and roof racks for your Snark! Click:   Snark Upgrades and Accessories

The Sail Swap option is described at left (bottom of middle column).   The "Zowie" nylon sail is pictured below:

snark sailboat hull

Super Snark, with SailboatsToGo co-owner Jim Luckett (crew)  and his granddaughter Vida (captain).  This sail is "Zowie", it's one of the nylon options available as a no cost exchange through our Sail Swap  optiion. It goes well with any hull color. 

Ian Schaefer

some things

Super Snark Sailboat

Super Snark Sailboat - Aft port view

I just bought this sailboat, an 11′ Super Snark. I’ve wanted to learn to sail for a few years—this seemed like the perfect sailboat with which to start. It is purportedly unsinkable and very stable. The ABS clad EPS foam hull certainly seems very durable and indeed, could not possibly sink even if completely swamped.

I had it out for the first time this weekend and had a fantastic time. This was my very first time sailing, but I found the boat quite easy to handle – the basic sailing instructions I’ve read were enough to get me underway with this small sailboat. With a little ‘effort’ I was even able to capsize the Super Snark and shortly thereafter learn how easy it is to right this boat. I’ll save the details of that story for another time.

After the first trip out I realized that all the wood parts – rudder, tiller, keel, transom – needed some attention. The marine plywood rudder was delaminating, and though it would be simple to cut a new one, I thought it might be worthwhile to repair it. After gluing and clamping the rudder in several places, I sanded and varnished all of the wood parts.

I also plan on painting the outside of the hull – navy blue. I’ll keep the white gunwhale and medium blue bumper as is. This motif should work nicely with then existing blue-white-blue-white striped sail and equally well with an Egyptian cotton colored sail I’d like to have.

Super Snark Links

  • CastleCraft Repair Tips for Snark Sailboats
  • CastleCraft Super Snark Sailboat Parts
  • Snark Sailboats Group on Yahoo! – Membership required
  • How to Sail a Boat – wikiHow [This article is short and to the point. I think it’s worth a read if you are new to sailing.]
  • Grog’s Boating Knots Index [Note: start with the figure eight and bowline knots.]

Want a New Snark Sailboat?

I was surprised to learn that Snark sailboats are still being made – not only the Super Snark, but also the Sea Skimmer, Sunflower, and others. If you don’t have the time or inclination to repair an older boat, a shiny new Snark is still a relatively affordable way to start sailing. Here are a few links to the best prices available through Amazon.

Rigging the Super Snark

Super Snark sail: detail of head grommet and stay

More Snark Upgrades

Splash Deck – I am planning to sail in the bay at Stone Harbor, New Jersey in late September. It can get choppy there – and while the summer boat traffic will have diminished I have yet to deal with the wake of a decent sized powerboat. The splash deck covers the area of the otherwise open hull from the mast step forward to the bow, shedding water the boat might take on from chop and wake. Coming over the bow. I am nearing completion of a wooden splash deck and I am excited about my design and the results. I will post photos and detail soon. Boom Vang – Provide downward tension on the boom for better sail shape and to minimize ‘bounce’. Use the free end of the halyard through the gooseneck of the boom and back to the cleat.

Traveller – create a bridle using a short length of line between the two screw eyes on the inside of the transom, leaving enough slack in the line to come up and over the tiller with clearance. Thread a small block on the bridle before fastening the line on the eyes. Then the tack end of the main sheet is secured to the dead eye of the block allowing the tack to travel along the bridle.

Tiller Tamer – Loop a short bungee cord around the tiller and connect to the screw eyes on the inside of the transom. This should exert just enoungh tension on the tiller to bring the rudder back to center when the tiller is released.

Daggerboard Retainer – attach on or two screw eyes into a small plywood plate on the stern end of the daggerboard trunk. From these eyes, run a bungee cord around the aft edge of the daggerboard. Pulling on the bungee allows the daggerboard to be raised or lowered – releasing it should hold the board in any vertical position.

Kickup Rudder – Design and make a two-piece rudder to replace the old one-piece rudder, allowing for easy beaching of the sailboat.

82 thoughts on “Super Snark Sailboat”

I just bought my first sailboat, a 1972 Sea Snark. It has the ABS coating but is bubbling and cut in places. Is this something I will need to replace and cover with fiberglass or is there and easier way to eliminate the bubbling and fix the small cuts everywhere. Not opposed to the fiberglass and it will have a great finish – just don’t have any clue what it’d be doing. Doesn’t look terribly hard to do though. Thank you for any help.

P.S. This is a great forum, thank you very much for creating it. Lots of great help, ideas and information.

Am I the only person in the world to own Snark Mayflower??? Mine needs some minor hull repairs, but its a wonderful boat. I am “older” and cannot handle the heavier boats, so this boat is great for me. I am wondering if anyone has made a pvc trolley for a 90# (without rigging) boat? I am thinking something with a sling in the rear? I plan to use larger all plasitc wheels, but the design is making me nuts. In the past have used a prebuilt hand cart with wood handle extensions, but now I want the stern at the rear of the trolley and that is the problem….suggestions? Also, when you painted did you remove the rubrail and what was that like???

I Love this site! Thanks!

Marci, not sure if you are still out there, but my dad is trying to repair the hull on our Mayflower, which we’ve been sailing on a small pond for years. He is 86 now. Years ago it smashed against a tree (the wind picked it up) and snapped in half. He repaired it at the time, but over the years it has taken on water, with a particular crack around the centerboard well. This summer he removed part of the skin and patched some of the holes in the foam with sections he created from an old styrofoam beach board. He also plans to build up the well internally. Not sure when he’ll be able to finish. I miss it dearly! I’ve tried buying a new hull for him in the past but could never find any for sale.Happy sails to you.

I can’t help you, except to say that, yes, someone else once owned and enjoyed the Snark Mayflower from 1974-1978. I used to carry it on my back over the rocks at Folly Cove on Cape Ann, Massachusetts each time we wanted to sail. My wife is writing a memoir of an one hour Gilligan’s Island sail that four of us took across Ipswich Bay in gentle swells . By the time we reached Plum Island seven hours later, they had turned into 10 foot breakers. Yes, a wonderful boat, so sturdy for being only a piece of foam and plastic. I found your post because my wife didn’t believe it was called a Mayflower, and I had began to believe our little Mayflower never existed. Do you have any pix? Love to see one again.

I just acquired an old super snark – no sail, rudder or daggerboard. I got it to learn to sail. I had read that this was the way to go and I thought I got a great deal – $40. However, I am now concerned – the thing is a lot more than 50 lbs. it took my husband and I a lot of effort to lift and slide into our van. Someone suggested water issues? Could there be a heavier model out there?. This has some kind of coating over the styrofoam. any thoughts to help me figure out whether to invest more money into parts.

Today, I went to the beach front with my kids. I found a sea shell and gave it to my 4 year old daughter and said “You can hear the ocean if you put this to your ear.” She placed the shell to her ear and screamed. There was a hermit crab inside and it pinched her ear. She never wants to go back! LoL I know this is entirely off topic but I had to tell someone!

My web blog: Golf Star Hack Download ( Irwin )

Peter, there are some photos of the Snark Mayflower here. I am a writing coach—you can find me at my writing coach dot net if your wife needs any help with her memoir! We are not far from Plum Island and would love to hear the tale. http://photobucket.com/images/snark%20mayflower?page=1

Dear all, how nice to found you all in the www. My Sunflower hull is delaminating arround the dagger board. Does someone have ideas and experiance in how to fix this? Thank you so much. Daniela Is there a overview of serial-numbers available, that will tell the year of manufacture?

Last fall I saw a Sea Snark at a thrift shop and got it for $65. A small hole in the sail but serviceable. A busy spring / summer but finally got my chance to sail two days ago. Wow what a rush. I went out in 3 mile/hour wind and gradually increasing to 5. The wind was was fluky and changing direction and after 2 1/2 hours this old guy at 69 was bushed. Looking at videos and instructions for rigging the main sheet I could see many versions. I saw one photo with a traveller. I wondered about needing a hiking strap but wondered if the hull might crack in half. Reading here about a bow splash. My idea is to keep the boat light so I will not add anything slick to the styrofoam. I think I should graduate to a bigger boat for such niceties. Going sailing alone on this craft is the way to go and encourage others to club for racing. This Sea Snark and some lawn mower racing. Retirement is great. Thanks to all to you who have suggested repairs and improvements to this newbie.

Wow…happened to come across this site and am glad to have found it. I purchased a Snark back in 1972. It had been stored in my parent’s garage and now that I have a cottage on a lake, I am going to restore it. I need to replace the sail for mice have wrecked havoc to the old one. In 1972, I fiber-glassed the bottom and that needs to be repainted, will decide on a color once I decide on he sail. I need to do a little repair for a mouse nest in the bottom had caused some damage. I think I have all the parts. I am looking forward to reading the rest of the thread. Hard to believe it has been 42 years…

Snagged an older Snark from neighborhood group site (!) and been out three times so far – is great!

Two questions:

1) I want to fortify hull – Snark people suggested using 2 part epoxy, but NOT marine grade (will melt the styrofoam) – any suggestions on a decent, but reasonable option and how much it takes to do the whole hull?

2) The third time we went out, my son and I were going pretty fast but maybe because we were causing a bit of waves (?) the boat suddenly filled with water – less than a minute. Yikes! I had to bail like a madwoman (once the water is higher than the centerboard hole it is pretty hard!!). I need to make a splash guard – can you post a pic of the one you made? So many thanks!!

What do you do when you’re on the water, swilling and you need to put the sail down? I have a super Snark. The sail does not come down at all and in very windy conditions, this could be dangerous.

I am coming late to the party here, but just retired and am determined to get my “freebie” 1969(?) Mayflower in the water. I had to buy a new sail for it because the one on it was roached. Is there somewhere I can see a diagram to show this newbie how to properly rig this little boat? Thanks in advance!

I have found an excellent repair for styrofoam to the plastic hull. I fixed the centerboard trunk works excellent. It’s called 5200 from 3M, very messy but works great an won’t harm styrofoam. I got it at Home Depot, an it’s not cheap. $14.00 a tube.

I have a 11′ Snark Sunflower in my garage (it was left by the home’s previous owner). It looks in great shape, as if it rarely saw the water! If anyone has an interest in purchasing, please contact me. I’d be happy to send pictures to anyone interested. Alan 215.630.9508 Newtown, Pa

The sail should come down by loosening the halyard. Here is a video on proper assembly and you will see how the halyard line is used to raise and lower the sail: http://www.sailboatstogo.com/content/Super_Snark_Sailboat_Delivery_Assembly_and_Rigging

Super Snarks are being sold on SailboatsToGo.com here; http://www.sailboatstogo.com/content/Snark_Super_Snark_Sunflower__Sailboats

Here is a new video of my granddaughter sailing a Super Snark: https://youtu.be/JMfLjxqQTeg

This page has links to 3 videos of the larger Snark, the Sunchaser. http://www.sailboatstogo.com/content/Sunchaser_I_Snark

This page has the history of the brand: http://www.sailboatstogo.com/content/Snark_History

This gadget makes the mast taller so you get more headroom under the boom: http://www.sailboatstogo.com/catalog/PARTS/5211

I have a super snark. we stored it in a storage unit for a number of years. but my dad back in the 80s took 4 inch PVC and put two screw fittings on the ends and created a tube to protect the sail during transport and storage.

Hey! I just got a Snark Sea Skimmer off of craigslist for just a few dollars. The Hull is in pretty bad shape (lots of duct tape patches) and the deck has some cracking i’m sure from age. It is in one piece tho and all of the pieces parts are there. Any suggestions on where i should get started on repairing the Hull? Products, techniques?

Hello, I also just purchased a Super Snark and have repaired the hull, a few dents and cracks with PC-11. Going to sand it a bit and then paint it. The original color is red but I may want to change it. Just wondering how the Krylon Fusion paint held up. I also think the Navy blue would be beautiful! Enjoying learning from fellow sailors! Thanks

Hey all –

I just did a Super Snark restoration in August and September. There is a yahoo user’s group for Snark sailboat owners which is active and helpful.

I have a photo album there showing my restoration from a hull that sat in the weeds for years to a fun and portable sailboat. Good luck!

I used Krylon fusion on my Snark and it worked great!

Hey I was wondering all the dimensions of the Rudder and dragger Board? I received a super snark in excellent condition for free. it just doesn’t have mast sail dragger board or rudder and I plan on making most of it my self any help or suggestions will be appreciated! New to sailing so be easy on me! Thanks again! Devin

I’m about to buy a very old snark, the unclad Kool cigarette version. Has anyone had any problems with these, as far as the hull breaking or getting waterlogged, etc.? Thanks!

Does anyone know what happen to the Snark Sailboat Owners Yahoo Group? I just bought a Sunflower. I have joined, but being a restricted group, its been more than a week and I have not heard back. I also tried to go to the group website and it is not working. (www.wisdomsecurity.com). What I wanted to know is: Has anyone set up a jib on a Sunflower? How did it work? How it was done? Thanks.

I have a 1972 Kool Snark. Smoked Kools to have required cartons and $99.00 to buy it. We did an amateur fiberglass job on it in 1972 but it has served the family well on lake and beach adventures. Would like to sell it. Any takers?Contact cbrittain47 @carolina.rr.com

What a treasure trove of information!

First of all, if anyone knows of a Snark Mayflower for sale in the eastern half of the US, please contact me. I will come and buy it.

Second, yes, the Snark Mayflower did exist. They discontinued them in…maybe 1979? Or in the 1980s?

My Uncle bought one in the late 1970s and had it at his lake cabin in Minnesota. I learned to sail on it in the late 1980s. I sailed it off and on for years when I was up there in the summer. It was a wonderful boat, simple to sail, and basically impossible to capsize. I sailed it one time for the first time in like 10 years in 2011. I have a blog post about it here: http://craigsteffen.net/blog/2011/07/2011_07_18_23_21_50_A.php Not a year after that, possibly that summer, it was apparently beyond repair and my uncle cut it up and threw it away.

The Mayflower hull (and some of the other Snark boats too) is a styrafoam core with a plastic outer shell. Having talked to people, apparently it’s generally fine if you keep it indoors when it’s not on the water. If you leave it outside all the time, however, the plastic will eventually develop cracks and let water in. My uncle had repaired it with fiberglass several times but finally just couldn’t keep up with it. When it cut it apart water poured out of the voids in the hull.

There is, by the by, a supplier in Europe that sells them. The Snark supplier in the US says that they will not ship them to the US, and the company is uninterested in resurrecting the design.

I would love to make one myself. There are drawings around. I could almost do it with photos and dimensions memory. I think cutting the shape out of styrafoam wouldn’t be too terribly hard; I’d then have to figure out how to make the hard outer shell. Fiberglass? Maybe carbon fiber is cheap enough nowadays?

If you’re looking for information on it, here’s a great resource: http://www.castlecraft.com/snark_assembly.htm It’s a collection of Snark product assembly manuals. It includes discontinued products like the Mayflower: http://www.castlecraft.com/PDF/Snark-Mayflower-Manual.pdf

Craig Steffen [email protected] 217-979-2392

I have a 1972 Sea Snark for sale. It’s in great condition & only used 4 times since refiberglassed. It’s to heavy for top of my new car

Just acquired a snark mayflower for 40 bucks. Out of the shark models, I have struggles to find much for any info on the mayflower specifically…anyone else own one?? The ABS had gouges and cracks that we have been working to repair. Where the rubber molding strip attaches, there is silicone or similar product that was used to seal the seam and it’s a real bear to remove. Anyone have any suggestions on what we can use to make it easier that will be safe to the foam and ABS? Think we could just cut a 2in strip off all the way around on both the inside and outside ABS peices and use fiberglass cloth or something to replace that area? I appreciate any input. Thanks.

Anyone tried fitting a 55 f sail (with adj to mast etc) to the supersnark? Any info on this? Stability?

Hi John G – I was wondering the same thing! I’ve just come upon one of the ABS-clad supersnarks and was curious about sail surface area upgrades. Are you still around, and did you try anything with any success?

I just purchased a 1989 super snark and am painting and restoring. Bought a beautiful new sail from sailboatstogo. will sail and post pics next week when I can figure out how to post them

Leave a Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

  • GPU Display Stand
  • 5" LCD PC Display 120mm Fan Mounting Kit
  • Best Custom PC Builds & PC Case Mods For Giveaways
  • Enlight EN-7237 Vintage Beige ATX Mid Case (USED)
  • 1998 Inwin Q500 ATX Stock Full Tower Case (USED)
  • 2001 Inwin Q500N Vintage ATX Case Mods (USED)
  • 1998 Inwin Q500 Vintage ATX Tower Mods (USED)
  • 1998 Vintage Beige ATX CK-152 Case (NO RETURNS)
  • 1998 Vintage Beige ATX Case Cooling Mods (USED)
  • Inwin Q500N Case Panel, Left (USED)
  • Inwin Q500N Case Panel, Right (USED)
  • Inwin Vintage ATX Case Front Fan Speaker Cage Holder
  • Inwin Vintage ATX HDD 3.5" Cage Holder (USED)
  • Lian Li PC-60 ATX Mid Tower Case (USED)
  • Vintage Computer Motherboards
  • Vintage Gaming Computer Gallery
  • Vintage Computer LED Cooling Fans
  • ATI Radeon HD 5870 Mac Pro
  • Plus Deck 2C BTO PC Computer Cassette Deck Tape To MP3
  • Retro Enlight Sleeper Gaming PC
  • Retro-Style Beige Inwin Sleeper Gaming PC
  • Corsair iCue 5000T RGB Case Gaming PC LCD Mod
  • Incarnate Extreme Custom Gaming PC Mod & Build
  • Prebuilt Star Wars Gaming PC Mod
  • Prebuilt "Metro Exodus" Gaming PC Build
  • Prebuilt "Borderlands 4" Custom Gaming PC
  • Prebuilt "Forza Horizon" Gaming PC
  • INTEL NUC Beast Canyon 11BTMi9 PC
  • Prebuilt Cherry Blossom Gaming PC
  • Prebuilt "Outer Worlds" Gaming PC Case Mod
  • AMD Prebuilt Gaming PC Wolfenstein Case Mod
  • Custom Prebuilt "ORCS MUST DIE 3" Gaming PC Build Mod.
  • Buy DDR5 SDRAM KITS for Prebuilt Intel Gaming PC
  • Lian Li 120mm PC Cooling Fan
  • Extreme PC Mods by Maximum PC Book (Used)
  • Corsair 250D CNC Milled Vented Front Bezel Plate
  • Fractal Design HDD Tray Define R6
  • Corsair 400R 500R HDD Trays
  • Cooler Master Masterbox NR200 N200P Feet
  • Cooler Master NR200P Vertical GPU Bracket
  • Cosmos Single Bay Cage
  • Cooler master Cosmos c700m c700p Rear Cover
  • Corsair RapidRoute Loop Cable Strap Hook Tie
  • Corsair ATX Power Supply Wall Outlet Cable
  • Corsair PSU Replacement Cables
  • Corsair Velcro Cable Strap Tie
  • Corsair XF Compression fittings
  • Corsair 45 Degree Rotary Adapter
  • Corsair 5000T panel latch
  • Corsair 5000T PCI Cover
  • Corsair 5000T HDD Storage Cage
  • Corsair 5000T SSD Tray
  • Corsair 5000T 3.5" HDD Tray
  • Corsair RGB Pump Cap
  • Corsair Velcro Cable Strap
  • Corsair iCUE SP120 RGB Fan
  • Corsair 570x PSU Filter
  • Corsair SP Lighting Controller
  • Corsair 6-Port RGB Fan HUB
  • Corsair 570X Glass Panels
  • Corsair 570x Front Badge LED
  • Corsair 570x Power Switch Panel
  • Corsair PSU Logo White LED
  • 570x TG Tempered Screw
  • Corsair Crystal 570X HDD Tray
  • Corsair Crystal 570X SSD Tray Sled
  • Crystal 570X Top Dust Filter, White.
  • Crystal 570X Front Dust Filter, White
  • Corsair Crystal 570X PSU Logo Cover
  • Corsair 570x Top Trim Piece
  • 5" LCD HDMI Fan Grill Aida64 Display Kit
  • Panaflo NMBT MAT FBA12G12L 120mm Fan
  • Cooler Master 140mm Fan
  • Corsair ML120 Premium Magnetic Levitation
  • Corsair 570x Top Radiator Support
  • Corsair RGB 120mm Fan
  • Lian Li 120mm Fan
  • Phanteks 140mm, 3 pin Case Cooling Fan
  • Mnpctech PC Mod Ruler Reference Tool
  • PC Pop Rivet Tool
  • Metal Nibbler Hand Tool
  • Dremel 426 Reinforced Cut Off Wheels
  • PC Cooling Fan Retaining Ring C-Clip Pliers
  • PC Pop Rivet Silver
  • PC Pop Rivet Black
  • Copper Pop Rivets
  • Lian Li Pop Rivets
  • PC Chassis Pop Rivet Gun Hand Tool
  • Honeycomb Mesh
  • Colored Acrylic Sheets
  • Satin Matte Black Acrylic Sheets
  • Light Transmissiting White Acrylic Sheet
  • Brushed Chrome Vinyl Film
  • Diamond Plate Film
  • Army Digital Camouflage Vinyl Film
  • Blue Digital Camouflage Vinyl Film
  • White Digital Camouflage Vinyl Film
  • Di-Noc Carbon Fiber Sheets
  • Engine Turned Vinyl Film
  • Darkside 12" ( 30cm ) Dimmable PC LED Strips
  • Darkside LED Molex Power Adapter Cable
  • Darkside LED Light Strip Mount Base
  • Darkside LED SATA Power Adapter Cable
  • Darkside LED 3 Pin Motherboard Power Cable
  • 5mm LEDs Pre-Wired
  • 3mm LEDs Pre-Wired
  • Darkside PC LED Y-Cable Splitter
  • DIY PC Case Window Kit
  • Bitfenix Prodigy
  • Clear PC Windows
  • Colored PC Window
  • Corsair C70
  • Fractal Design Nano S
  • NZXT H440 Clear Custom Window
  • "3 Gas Mask" PC Window Decal
  • "AMD" PC Window Decal
  • "AMERICAS ARMY" PC Window Decal
  • "Anti Mac" Skull PC Window Decal
  • "AUTOBOT" PC Window Decal
  • "Break Glass" PC Window Decal
  • "DECEPTICON" PC Window Decal
  • "H2O COOLED" PC Window Decal
  • "Intel Inside" PC Window Decal
  • "LIAN LI" PC Window Decal
  • "MSI" PC Window Decal
  • "SNIPER" PC Window Decal
  • Small U-Channel
  • Wide U-Channel
  • 120mm Hexagon Honeycomb PC Fan Grill
  • AIO Cpu Cooler Grill
  • Mesh PC Fan Grills
  • AMD Ryzen PC Fan Grills
  • ASUS ROG PC Fan Grill
  • Overkill "Fallout Vault-Tec" Grill
  • Overkill "Nautilus" PC Fan Grill
  • Overkill "Honeycomb" PC Fan Grill
  • Overkill "Ring" PC Fan Grill
  • Overkill 360mm Open radiator Grill
  • Chrome PC Fan Wire Grills
  • Open Air Aluminum Fan Frames
  • Black PC Fan Wire Guards & Grills
  • 120mm Round Hole Pro-Line PC Fan Grills
  • 120mm Honeycomb Pro-Line PC Fan Grills
  • 200mm / 230mm PC Fan Grills & Guards
  • Computer Power Supply Filters
  • Corsair 750D "High Airflow"
  • PC Cooling Fan Filters
  • Fan Silencing Grommets
  • PC Magnetic Filter Screens
  • PC Grommet Small
  • PC Grommet Large
  • Round PC Grommet
  • Phanteks Cable Grommets
  • PC Fan Screws
  • TG Panel Screws
  • Computer PC Case Thumb Screws
  • Motherboard Thumb Screws
  • Custom PC Case Thumbscrews
  • Corsair Hydro Fan Mounting Kit Screws
  • Lian Li Galahad AIO 240/360 Screws
  • NZXT Kraken Fan Mounting Kit Screws
  • M3 Socket Head Washers "Beveled" (set of 4)
  • M4 Socket Head Washers "Beveled" (set of 4)
  • 6/32 Anodized Red Screws
  • 6/32 Anodized Blue Screws
  • Corsair 570x Crystal Anodized Thumbscrews
  • PSU Thumbscrews
  • Black M3 M4 PC Radiator Screws
  • Silver M3 M4 PC Radiator Screws
  • 2x120mm Fan & 240mm Radiator Mounting Plate
  • Corsair XR5 XR7 Radiator Screws
  • 240mm ASUS ROG Billet Rad Grills
  • 240mm PC Radiator & AIO CPU Cooler Grills
  • 360mm PC Radiator & AIO CPU Cooler Grills
  • PC Radiator Templates
  • 120mm Honeycomb PC Fan Grill
  • Beefy PC Case Feet
  • Grooved PC Case Feet, Large, ATX, EATX
  • Grooved PC Case Feet, Small, ITX MATX
  • CaseLabs BULLET Silver Case Feet, Small
  • CaseLabs ATX & EATX Cases and Towers
  • CYBERWOOD PC Case Feet
  • InWin PC Case Feet
  • Lian Li TU150 Mini ITX Case Feet
  • NCASE M1 Custom Case Feet
  • Riser Kit For NCASE M1 For Case Feet
  • SLIGER Cerberus PC Desktop Case Feet
  • SLIGER SM550 SM560 SM580 S610 S620 Feet
  • SSUPD Meshlicious PC Case Feet
  • Thermaltake Core v21 Case Feet
  • Yuel Beast Designs Chassis Feet
  • Uptop / Prinsu Billet Rack Handle
  • PC Bar Handles
  • Long PC Bar Handles
  • Recessed PC Handles
  • Spring Loaded PC Case Handles
  • Anti Vandal Push Button Switches
  • Fighter Pilot Toggle Switches
  • 2 pin Motherboard Power Switch Connector, 16" Long
  • EVGA ATX Power Supply Power Wall Cable
  • Define R6 Reservoir Shroud
  • Fractal Design Define Nano S Clear Side Panel
  • HYTE Y40 Glass Panels
  • Phanteks Hard Drive Tray
  • Phanteks Cable Grommet
  • Phanteks Primo Pro HDD Cage
  • Phanteks Enthoo Primo Side Panel
  • Thermaltake ATX Power Supply Power Wall Cable
  • 3M Scotchbrite
  • 3M 4010 Tape
  • Safety Glasses
  • Sailboat Mast Step Bolt With Wing Nut
  • Alcort & Sunfish Rudder / Tiller
  • Practice Nautical Knot Rope Tying Cleat Kit
  • Super Snark Sailboat Rudder And Tiller
  • Mooring Pennants
  • Johnson Boat Works T-Shirt
  • Used Harken 434 Jib Sail Furling Gear
  • Used Catalina Capri CP-14.2 Jib Sail, Hank on
  • Sandpiper 80, Sea Witch, Sunchaser II Main Sail
  • Used Optimist Sailboat Wood Mahogany Daggerboard (FRP)
  • Honda Transmission Fluid Refill Dispenser
  • GPU Graphics Card Display Stand
  • NVIDIA RTX 4000 Series GPU supports
  • GPU Cooling Fan Bracket
  • RTX / GTX / Radeon LE Support
  • NVIDIA RTX Series
  • NVIDIA GTX Series
  • All RADEON Series
  • SLI / Crossfire
  • STAGE 2 RTX 40 SERIES 4090 4080 Vertical Mount
  • STAGE 1 Vertical GPU Bracket
  • STAGE 2 Vertical GPU Bracket
  • STAGE 1 RTX 3090 FE Vertical Mount
  • STAGE 2 Fan Mounting Screws
  • STAGE 2 RTX 3090 FE Vertical Mount
  • NCASE M1 Vertical SFF Mini ITX Case GPU Mounting Bracket
  • Compact Vertical Mounts
  • 3.0 PCI-Express x16 Riser Cable
  • 4.0 PCI-Express x16 Riser Cable
  • GPU Waterblock
  • ATX Pin Extractor Tool
  • ATX Molex Pin Removal Tool
  • Billet PC Cable Combs
  • Stealth Cable Combs
  • Carbon Fiber Combs
  • Ensourced Cable Combs
  • Ethernet Cat Combs
  • UV Reactive Zip Ties
  • Small PC Cable Base
  • Large PC Cable Base
  • PC Cable Zip Tie Bases
  • PC Cable Clamps
  • Ethernet Cable Wall Bases
  • Motherboard & PSU Cable Clamp
  • Turntable Feet Upgrade Kit
  • Turntable Vibration Pads
  • Adjustable Height Turntable Isolation Platform
  • 1.25" Thick Turntable Isolation Platform
  • 1.75" Thick Large Turntable Isolation Platform
  • Butcher & Cutting Block Platform Feet
  • Acrylic Turntable Isolation Platform
  • 1.75" Turntable Adjustable Feet
  • 2.75" Audition Turntable Feet
  • 3" Sorbo Turntable Adj Feet
  • Wood Plinth Turntable Feet
  • Acoustic Research AR "Small" Turntable Feet
  • Acoustic Research AR "Large" Turntable Feet
  • Audio Technica AT-LP5X, LP120, LP120X, LP-140XP
  • Audio Technica AT-LPW40WN, AT-LP7 Turntable Feet
  • Bluenote Turntable
  • Denon DP-40F Turntable Feet
  • Denon DP-47F Turntable Feet
  • DENON DP-57L 59L 60L 62L 72L
  • Denon DP-61F Isolation Feet
  • Denon DP-80, DK-300 Turntable Feet
  • DENON DP-755, DP-790 Turntable Feet
  • Denon DP-1200 Turntable Feet
  • DENON DP-2000, 2550 Turntable Feet
  • DENON DP-3000, 3500, 3700 Turntable Feet
  • EAT European Audio Team
  • EMPIRE Turntable Feet
  • Fisher MT-6225, 6250 Turntable Feet
  • FLUANCE RT80 RT81 Turntable Feet
  • FLUANCE RT82 RT83 RT84 RT85 Feet
  • Fluance HiFi Stabilizer Weight
  • Harman Kardon T40 Turntable Isolation Feet
  • Harman Kardon T45c Turntable Isolation Feet
  • HITACHI HT-840 Turntable Feet
  • HITACHI HT-500, HT-550, HT-561 Feet
  • Gold Note Valore 425
  • JVC VICTOR QL Series
  • JVC QL-A5 Turntable Isolation Feet
  • JVC L-A10, L-A31, L-A55, L-F66 Turntable
  • JVC QL-Y55F Series Turntable Isolation Feet
  • JVC QL-Y66F Series Turntable Isolation Feet
  • Kenwood KP Series Turntable Feet
  • Kenwood KP-990 Turntable Isolation Feet
  • Kenwood KD-2055 Turntable Isolation Feet
  • Kenwood KD-3070 Turntable Isolation Feet
  • Kenwood KD-5033 Turntable Isolation Feet (Four)
  • Kenwood KD-500, KD-550, 5066, KD-600, KD-650 Feet
  • Lenco Adjustable Feet
  • Lenco L3808 Turntable Feet
  • LENCO M6 Thread Turntable Isolation Feet (Set of 4)
  • Linn Sondek Lp12 Adjustable
  • Luxman Turntables
  • Marantz 6100 6200
  • Marantz 6110
  • Marantz 6150, 6170
  • Marantz 6300
  • McIntosh MT10 Precision Turntable Feet
  • MCS Turntable
  • Michell Transcriptor Feet
  • Micro Seiki MB-14 Turntable Feet
  • Micro Seiki BL-91 Turntable Feet
  • Micro Seiki DDX DQX-1000 Turntable Feet
  • Mitsubishi Turntable Feet
  • Mnpctech "Legacy" Feet
  • Monolith Turntable Adj Feet
  • Music Hall Classic Turntable Feet
  • Music Hall MMF-1.3, 1.5, 2.2, 2.3, 5.3 Feet
  • NAD C-533, C-555 Turntable Isolation Upgrade Feet (Three)
  • NAD C-556, C-558, C-588 Turntable Isolation Upgrade Feet (Four)
  • Oracle Audio Delphi Upgrade Feet
  • Pioneer PL-2, 4, 5, 7, 255, 350, 400, 630 Foot Pads
  • Pioneer PL-12D Turntable Adjustable Feet
  • Pioneer PL-25, PL-31, PL-41 Feet
  • Pioneer PL-50/PL-50L Turntable Feet
  • Pioneer PL-55, PL-55X Adj Turntable Feet
  • Pioneer PL-112D, PL-115D, and PL-117D
  • Pioneer DJ PLX 500 / 1000 Turntable Feet
  • Pioneer PL-Series Black Pedestal Feet
  • Pioneer PL-510A Turntable Feet
  • PIONEER PL-560, 540, 518, 516, 514, 512 Isolation Feet (Set of Four)
  • USED PIONEER PL-530, 550, 570 Turntable Base
  • Pioneer PL-512 & A45D Isolation Feet
  • Pioneer PL-520 Turntable Feet
  • Pioneer PL-530 550 570 Turntable Feet
  • Pioneer PL-S50, PL-S70 Turntable Feet
  • Pioneer Series 20 PL-590 Turntable Feet
  • Pro-ject RPM 1, 3, 5, 5.1, 9 Xpression, Adj Turntable Feet
  • Pro-ject Debut Carbon EVO, Xpression, Classic
  • Pro-ject Debut Pro Turntable
  • Pro-ject Debut Carbon I, II, III Sorbothane
  • Pro-ject Debut Carbon I, II, III Adjustable
  • Pro-ject Essential I II III
  • Pro-Ject Audio T1 Turntable
  • Realistic Lab 500 Turntable
  • Realistic Lab 400, 420 Turntable
  • REGA Sorbothane Turntable Feet
  • REGA Rp1, Rp1 Plus, Rp2, Rp3 Height Adjustable
  • REGA RP8 Height Adjustable Feet
  • REGA Rp6, Rp7, Rp9 Height Adjustable
  • REGA Planar 25 / RP25 Turntable Feet
  • REGA Planar P9 and RP10 Skeletal Feet
  • Rekkord Turntable Feet
  • ReLoop Isolation Feet
  • Rotel RP 850 Turntable
  • Rotel RP-1001 Turntable
  • Sansui SR-717 Feet
  • SANSUI SR-535 SR-737 SR-7090 Feet
  • SANSUI SR-838 636 333
  • SANSUI SR-929
  • SANYO Turntable
  • SCOTT PS-Series
  • Sota Turntable Feet
  • Sota Comet & Moonbeam Turntable Feet
  • SONY PS-X4 PS-X5 PS-X6 PS-X7 Turntable Feet
  • SONY PS-X50, PS-X60, PS-X70 Turntable Feet
  • SONY PS-6750 Turntable Feet
  • Systemdek Turntable
  • TEAC Turntable Feet
  • Technics SL-D1, SL-D2, SL-D3, 33, SL-Q2 ,Q3, Q200
  • Technics 1200G, 1210G Feet
  • SL-10 Turntable Feet
  • Technics SL-23 Turntable
  • Technics SL-100C Feet
  • SL-150, SL-151 Feet
  • SL-110 and SL-1100
  • Technics SL-1000 Obsidian Feet
  • SL-1200 Mk7 Turntable
  • SL-1200, SL-1210 Feet
  • SL-1200G, 1200GR, 1210GAE, 1210G, 1210GR
  • SL-1200GR & 1210GR Adjustable Feet
  • SL-1350, SL-1360
  • SL-1300, 1400, 1410, 1500
  • Mk1 SL-1301, 1401, 1600, 1700, 1800
  • SL-1500C Turntable
  • SL-1600, 1700, 1800
  • SL-1900, 1950 Turntable
  • Technics SL-3300, SL-3310 Feet
  • Technics SL-5200, 5300, 5310 Feet
  • Technics SP-Series
  • SL-2000 Turntable
  • SL-BD Turntable
  • Technics SL-QL5 Turntable Feet
  • THORENS Small Feet
  • THORENS Large Feet
  • THORENS Adjustable Height Feet
  • THORENS TD 102 A Feet
  • DC VPI TNT Turntable Motor Isolation Pad
  • VPI Prime, Scout, Super Prime, Signature Adj ISO Feet
  • VPI Aries Scout Scoutmaster Feet
  • VPI Cliffwood & Player
  • VPI HW-40 Prime Scout Signature
  • VPI Classic, Nomad, Traveler
  • VPI HW-19 Series Turntable
  • VPI HW-19 Series Adjustable Leveling Feet
  • VPI Classic Signature, Scout, Super Prime Factory Feet
  • GT-2000 Turntable Isolation Feet
  • Yamaha PX-2 Turntable Isolation Feet
  • Yamaha PX-3 Turntable Isolation Feet
  • Yamaha YP-D6 Turntable Isolation Feet
  • Yamaha YP-D7, D8 Turntable Isolation Feet
  • Yamaha YP–D71 Turntable Isolation Feet
  • Yamaha YP-350, YP-701, P-751 Feet
  • Turntable Record Player Clear Bubble Level Tool.
  • Cork Pads for Turntables
  • Turntable Pads
  • Record Center Weight
  • M6 Threaded Inserts Kit
  • Dayton Audio Turntable Feet
  • Vandersteen Floor Speaker Isolation Feet, Set Of Six
  • VPI JMW alignment Jig
  • Power Cord Cable for Computer LCD Monitors
  • Power Cord Cable for Computer Printers
  • Used APPLE Power Mac G5 NVIDIA GeForce Video Card.
  • Used Apple G5 Power Mac DVDRW Optical Drive
  • Used Apple G5 Power Mac Cooling Fan 80mm
  • Used Apple Power Mac G5 Speaker Genuine 382015
  • Used Apple Power Mac G5 Dual Cooling Fans
  • Apple G5 Pro Mac 1GB Memory Ram Stick, Avant
  • Apple G5 Pro Mac 2GB Memory Ram Stick, Crucial
  • Apple G5 Pro Mac 2GB Memory Ram Stick, Micron
  • Used Apple Mac Pro PCI Expansion Slot Cover G3/G4/G5
  • Used 2009 Apple Board for Mac Pro 5.1 (820-2337-A)
  • Used Apple Mac Pro Memory Board 820-2482-A Intel
  • Apple Mac Pro HL Hitachi-LG Multi DVD Rewriter GH41N
  • Used Apple G5 Pro Mac Optical Drive CD DVD Disc Bay Cover Shroud
  • Apple Mac Pro 4,1 A1289 980w PSU 614-0435
  • Apple Mac Pro 120mm Delta Fan (AFB1212HHE)
  • Apple Mac Pro A1289 Front USB Panel Board
  • M8 to M6 Turntable Foot Thread Reducers
  • Used Stereo Cassette Players
  • Pioneer PL-100 Turntable Counter Weight (USED)
  • Pioneer PL-100 Turntable Head Shell (USED)
  • Pioneer PL-100 Turntable Slip Mat With Small Tear
  • Pioneer Pl-100 Turntable Platter (USED)
  • 5" LCD PC Display Screen Fan Mounting Kit
  • AIE-2024I 24 I-Bar Shrink Wrap Wire
  • ASUS Replacement Fans 95mm Strix 3060 3070 3080 3090
  • Gigabyte Motherboard Empty Retail Boxes
  • Gigabyte Aorus Z490 ELITE AC Motherboard Box
  • Intel 10th Gen Core i9 Empty Retail Box Only
  • Intel 12th Gen Core i9 Empty Retail Box Only
  • Amplifier, DAC, Reel to Reel Isolation Platform
  • Amplifier Anti-Vibration Pads
  • Fender Guitar & Bass Amp Amplifier Feet
  • Marshall Guitar & Bass Amp Amplifier Feet
  • 2 pin Motherboard Connector
  • Fighter Pilot Toggles
  • Mini Toggle Switch
  • Pre-wired 16mm Blue LED PC Vandal Power Switch
  • Pre-wired 16mm Red LED PC Vandal Power Switch
  • 16mm Switch Drill Bit Hole Saw Attachment
  • CD, DAC, CDT Player Isolation Pads
  • 5/16" Thick Isolating Washers
  • 1/4" Thick Isolating Washers
  • Marantz Stereo Feet
  • Marantz Wood Case Feet
  • MR88 Tuner, MCT500 CD Player Feet
  • MA-5200 Amp Feet
  • MA-6600 Amp Feet
  • MA-6900 Amp Feet
  • MA-7200 Amp Feet
  • MA-8900 Amp Feet
  • Pioneer SA Stereo Receiver Amplifier Feet (Four)
  • Pioneer SX Stereo Receiver Amplifier Feet (Four)
  • Preamp Amplifier Feet
  • Small Black Rubber Feet
  • 90 Degree Motherboard Power Connector
  • 90 Degree Right Angle USB 3.0 Connector
  • 24 Pin ATX Power Supply PSU Jumper Bridge
  • PBN AUDIO Turntable Feet
  • Rek-O-Kut Turntable Feet
  • Roper Washing Machine Water Inlet Valve
  • Speaker Vibration Pads
  • IN-12 NIXIE TUBE USB CLOCK Backup Battery
  • Schiit Audio Component Custom Stack Riser Feet
  • Thermaltake ATX PSU Power Wall Cable
  • Used 2006 Honda Element CD Radio
  • Subaru Used Hub Caps
  • Toyota Used Hub Caps
  • Used Toyota Sienna 16" Wheel Hub Cap #61124
  • Used Toyota Corolla 16" Wheel Hub Cap #61172


2 part epoxy snark sailboat , glue for snark sailboat , guide for repairing snark , repair snark hull , snark sailboat repair , two part epoxy snark sailboat , which epoxy for snark sailboat , which epoxy for snark sailboat hull - August 3, 2023

How To Guide On Snark Sailboat Hull Repair

How to repair your snark sailboat's styrofoam hull with abs polymer shell in this do-it-yourself guide..

Don't waste your time searching for the right epoxy for your Snark sailboat repair - btw, it's this Original Gorilla Glue that you mix with bits of styrofoam to repair your Snark hull. Don't waste your time trying to find out which 2-part epoxy to use. We found a faster and better solution with Expandable Spray Foam Filler. 

Say goodbye to holes and chips as we walk you through the step-by-step process of fixing your Snark sailboat hull with Spray Filler. This guide is applicable to various Snark sailboat models, including the Snark, Sea Snark, Super Snark, Snark Sundancer, Snark Fireflower, Snark Sunflower, and Sunchaser I and II. 

How To Guide On Snark Sundancer Sailboat Hull Repair

The Snark Sundancer Sailboat was discontinued from production in 1983.

Several hundred people each year buy a used Snark sailboat and face the dilemma of how to repair the styrofoam hull with ABS polymer shell. This Do-It-Youself guide can be used on any Snark sailboat with the ABS polymer shell and styrofoam hull.

Best How To Guide Step by Step Repair Snark Sailboat Hull Foam

Close look at the gouge in the bow of our Snark sailboat. We're going to fill gouge with spray foam filler, then cover the ABS polymer outter shell with fiberglass.

What Fpam Spray To Use On Snark Sailboat Hull Repair

Buy Great Stuff Gaps & Cracks Expandable Foam Spray   to fill and repair any cracks and holes in your Snark Sailboat Hull.

Use This Detailed How To Guide On Repairing Your Snark Sailboat Hull.

The Great Stuff Gap & Cracks Filler can comes with detachable long nozzle. Just insert nozzle in the hole or chip in your Snark sailboat. This filler foam expands as it cures, so you only need little squirts. Practice on scrap of cardboard or paper so you get a feel for how much foam to apply.  

Sprea Foam Filler Spray With Cardboard On Snark Sailboat Hull When Repairing It.

Use piece of cardboard to remove access foam and smooth over the Spray Filler Foam as it expands while curing. This cure time can take 20 - 30 minutes

How To Fill Hole with Foam Spray On Super Snark Sailboat Hull.

After the foam has cured, estimate 20 - 30 minutes, we use a hacksaw blade to remove the excess foam. 

Cut Excess Expandable Foam Filler Spray with Hack Saw Blade on Snark Sailboat Styrofoam Repair.

Cured foam after using hacksaw blade to remove excess filler foam in the Snark sailboat hull. This process is much faster and easier than mixing original Gorilla Glue with bits of styrofoam. 

Using Sanding Block to Smooth Expandable Foam Spray In Hole on Snark Sailboat Hull Repair Guide.

After foam has cured, use 80 grit sanding block or sand paper to smooth over the cured spray foam. If your hull is styofoam only, you don't have to do anything else from this point!

If Snark Sailboat hull has the ABS Polymer outter shell, you can seal up the foam repair with Fiberglass aover the ABS Polymer shell.

Which Fiberglass resin and two part epoxy can i use on snark sailboat hull repair?

Buy BONDO Fiberglass Resin Repair Kit

Which Fiberglass repair Bondo Kit will work on Snark Sailboat Hull?

Cured Bondo Fiberglass.

How To Carry Snark Sailboat On Car Roof after making hull repairs.

Now we're ready to get our Snark Sailboat back on the water and go sailing! 

Learn how to easily repair the styrofoam hull of your Snark sailboat with this comprehensive guide. No need to waste time and money on expensive epoxy. Use this step-by-step instruction guide on how to fill holes and fix chips in your Snark sailboat hull. This guide is suitable for all Snark sailboat models with styrofoam hull including Snark, Sea Snark, Super Snark, Snark Sundancer, Snark Fireflower, Snark Sunflower, and Sunchaser I and II sailboats. Don't let a damaged hull ruin your sailing experience - get your boat back in top shape today.

Discover the ultimate solution for repairing your Snark sailboat hull! This comprehensive guide is specifically designed for Snark sailboats with an ABS polymer shell and styrofoam hull. Forget about searching for the right epoxy or glue - we have the answer you've been looking for. Say goodbye to expensive two-part epoxy and say hello to the perfect Gorilla Glue for your Snark sailboat hull repair. Not only will we show you how to fix holes and chips in your hull, but we'll also reveal the best epoxy and glue options for all Snark sailboat models - including the Snark, Sea Snark, Super Snark, Snark Sundancer, Snark Fireflower, Snark Sunflower, and Sunchaser I and II. Don't miss out on this step-by-step instructional guide that will transform your sailboat repair process.

T. Kerst January 17, 2024

Please tell people to not store boat in the sun so it won’t delaminate. Your obligation.

Leave a comment

Please note, comments must be approved before they are published

  • #casemodding
  • #cassettefuturism
  • #computex2020
  • #gamedesign
  • #gamedeveloper
  • #gamingsetup
  • #indiegamedev
  • #pcmasterrace
  • #pcwatercooling
  • #retrofuturism
  • #screenshotsaturday
  • 011D case radiator sizes
  • 1070 gpu is running hot fix
  • 131-0051-R3-A laser cartridge
  • 2 part epoxy snark sailboat
  • 200 mph dodge rampage
  • 200mph texas speed engine
  • 2020 PC case mod looks atompunk
  • 2021 Intel PC Case Mod Level-Up Challenge
  • 2022 2021 Intel PC Case Mod Level-Up Challenge
  • 3d print smooth surface
  • 3M Bondo Fillable Primer
  • 3M Bondo Fillable Primer Review
  • 40's sci-fi computer case mod
  • 50's style computer case mod
  • add boom vang lie to lockley
  • add custom push button switch in your gaming PC
  • Add Mesh to Front of PC Case
  • add screen for rainmeter on computer
  • add uphaul line to sailboat
  • adjustable install topping lift
  • advertise indie game for free
  • airbrush weathering guide
  • Alchemist pc case mod
  • alignable email spam
  • alignable legit?
  • alignable social network scam
  • alignable spam bot
  • alternative Metal Effects Oxidizing Iron Paint
  • amazon account scam
  • amazon fallout series
  • amazon fallout series review
  • amazon warehouse computer part scam
  • amazon warehouse computer video card scam
  • amazon warehouse gpu deals
  • amazon warehouse return scam
  • amazon warehouse ripoff return scam
  • amazon warehouse scam
  • amazon warehouse unboxing
  • antique bronze metal panel latches
  • ASUS ROG Strix RTX 2080 Ti GPU amazon scam
  • ASUS ROG Strix RTX 2080 Ti GPU amazon warehouse scam
  • ASUS ROG Strix RTX 2080 Ti GPU return scam
  • asus RTX amazon scam
  • Atompunk Art piece
  • Atompunk PC case mod
  • backup copy hostgator hacked gone
  • beefurni teak cutting board review
  • Best 8.8 Inch LCD Display For Lian Li PC build
  • best butcher block size for Audio Technica turnable
  • best butcher block size for fluance turnable
  • best butcher block size for project turnable
  • best butcher block size for uturn turnable
  • Best china PC games
  • best hostgator snappy plan?
  • best hyte Y60 build
  • best indie game showcase
  • best influencer for my pc game
  • Best INTEL Alchemist ARC Gaming GPU?
  • Best Intel Alder Lake Core i9-12900k for my build
  • best LCD for AIDA64
  • best LCD for rain meter
  • best line for topping lift
  • best NIC for Fiber Optic Internet
  • best NIC for USI Fiber Optic Internet
  • best PC builder maker for gaming tournament
  • best RGB fan for HYTE Y40
  • best RGB fan for HYTE Y60 PC build.
  • Best RTX 2080 TI FE gaming computer
  • best screen for AIDA64
  • best solar led light outdoors
  • best solar lights
  • best solar lights on amazon
  • best solar lights on amazon prime
  • best solar lights on menards
  • best solar lights outdoor lighting
  • best solar pathway lights
  • best solar powered security light on amazon
  • best trailer sailboat
  • best turntable feet upgrade
  • best way to promote new game release
  • bitspower gaming pc
  • boat guy grant monster garage
  • bondo fillable primer
  • bondo fillable primer for 3d prints
  • Bondo Filler Primer 3D prints
  • build 286 Pentium Retro Gaming PC build
  • build 386 Pentium Retro Gaming PC build
  • build 486 Pentium Retro Gaming PC build
  • build my hyte y60 PC
  • build steam wishlist
  • build vintage style computer case mod ideas
  • building gaming pc's for giveaways
  • builds custom gaming PC for giveaways
  • buy $1000 gaming pc
  • buy $2000 gaming pc
  • buy best solar lights outdoor lighting
  • buy corsair 5000T PC build
  • Buy DARKFLASH DF800 case
  • Buy DDR5 38400
  • buy fallout game package
  • Buy Goldring Lenco 88 Turntable Feet
  • buy hyte Y40
  • buy hyte Y40 build ideas
  • buy hyte Y40 builds
  • buy hyte Y40 case mods
  • buy hyte Y60
  • buy hyte Y60 case mods
  • buy hyte Y60 gpu size
  • Buy INTEL Alchemist ARC Benchmark
  • Buy INTEL Alchemist ARC Gaming PC
  • Buy INTEL Alchemist ARC Test
  • buy lockley newport 17 parts
  • buy Metal Effects Oxidizing Iron Paint
  • buy new main sheet sail
  • buy new sail
  • buy new sails at sailcrafters
  • buy new sails by sailrite
  • buy new sails for catalina
  • buy new sails for flying scot
  • buy new sails for lockley
  • buy new sails for rhoads
  • buy the Mortal Shell game releases on August 18th
  • buy the best screen for aida 64
  • buyer beware amazon warehouse
  • canon pixma stopped working
  • canon pixma stopped working error 6A81
  • cassette futurism
  • centurylink slow
  • clean canon pixma black ink absorber pad
  • CNC custom gaming computer build
  • CNC machined custom gaming computer build
  • computer looks like 50's vintage appliance refrigerator
  • computer stat screen for lian li 011
  • cool down amd radeon RX 5700 XT
  • cool down computer chipset
  • cool down my pc tutorial
  • cool down overheated 1080
  • Cool down retro gaming PC computer
  • Cool down retro gaming PC computer is running hot
  • cool my computer down
  • cool my computer guide
  • cool my computer how to
  • cool off my computer guide
  • Cooler Master Cosmos c700m build
  • Cooler Master Cosmos c700m RGB
  • coolmer master case mod competition 2020
  • corona virus minneapolis
  • corsair icue case build
  • corsair rgb pc build
  • cost of Universal Laser cartridge 25 watt
  • cost to buy new sails
  • covid-19 minneapolis post office quarantine
  • covid-19 minnesota quarantine
  • custom computer mod builder for advertising
  • custom gaming computers for events
  • custom gaming pc case mod by mnpctech
  • custom water cooled PC builder minnesota
  • DARKFLASH DF800 announced
  • DARKFLASH DF800 case specs
  • DARKFLASH DF800 release date
  • Decopunk PC case mod
  • Define S bezel mesh Mod
  • Desktop custom gaming PC builder for giveway
  • Dieselpunk PC case mod
  • DIY guide installing a topping lift
  • DIY guide to building and modding gaming PC
  • doom eternal game release covid-19 minnesota quarantine
  • dsicovery+ monster garage
  • e-machine retro pc build
  • Easy way to smooth 3D parts
  • Easy way to smooth 3D printed parts
  • end humming vinyl
  • Enter Intel PC Case Mod Contest
  • enter Intel PC Mod Level-Up Challenge
  • episode guide monster garage re-boot
  • episode guide new monster garage
  • error 6A81 fix clean canon pixma black ink absorber pad
  • fallout TV Show
  • Fallout 25th Anniversary PC Mod
  • Fallout Anniversary PC Case Mod
  • fallout game style computer case mod
  • fallout gaming pc build
  • fallout theme pc case mod
  • Find Goldring Lenco 88 Turntable Restoration Isolation Feet
  • find and buy vintage IBM server tower
  • find and hire custom PC builder for esports event
  • find dieselpunk style computer
  • find solution for cooling my PC
  • Fire Effect Ember Orange Flame Simulation Led Flicker Light for Props Theatrical Scenery Sold by: Prop and Scenery Lights
  • fix amd that is running hot
  • Fix and repair centerboard line
  • Fix and repair lido centerboard line
  • Fix and repair lockley centerboard line
  • Fix and repair montgomery centerboard line
  • Fix and repair newport centerboard line
  • Fix and repair o-day centerboard line
  • Fix and repair precision centerboard line
  • Fix and repair rhoads centerboard line
  • Fix and upgrade pioneer PL turntable feet
  • fix canon pixma error 6A81
  • fix centurylink slow
  • fix ERROR 6A81 canon ip87
  • fix ERROR 6A81 canon ip8700
  • fix ERROR 6A81 canon ip8720
  • fix Metal Effects Oxidizing Iron Paint
  • fix overheating computer
  • fix overheating graphics card
  • Fix Universal Laser C-200 LaserKiosk UL-25 Watt Manual
  • FormulaMod 8.8 Inch LCD Display Install
  • Fractal design Case Front Bezel Mod Mesh
  • Fractal Design Custom Replacement Front Bezel Airflow Mod
  • Fractal Design Define S "Mesh" Custom Replacement Front Bezel Plate Case Mod
  • Front PC Bezel Mesh Grill Mod Guide
  • gaming computers for giveways
  • gaming pc for new game release
  • Gaming PC to promote new game release
  • gasification corvette
  • GDC 2020 event cancelled
  • glue for snark sailboat
  • Goldring Lenco 88 Turntable Feet For Sale
  • gpu running hot
  • grow steam wishlist
  • guide cool down my pc
  • guide for repairing snark
  • guide keep my computer cool
  • guide to wiring a Bulgin Vandal Resistant Push Button Switch to a Computer.
  • help fix canon pixma printer error
  • hire advertising china pc game
  • hire custom computer builder minneapolis
  • Hire Custom Gaming PC Builder Modder
  • hire custom pc builder for event
  • hire custom PC builder for giveaway
  • Hire Fallout Anniversary PC Case Mod
  • hire mnpctech to build your custom water cooled gaming PC
  • hire pc case modder for game release
  • hire pc case modder for giveaway
  • hire professional to build and mod my PC
  • HOGBEAR Terry monster garage
  • host gator hacked
  • host gator infected
  • host gator site lock
  • hostgator hacked
  • hostgator hacking
  • hostgator review
  • hostgator sitelock
  • hostgator sites hacked
  • hostgator snappy safe?
  • hostgator suspended my account
  • How do I Create A Realistic Looking Fire Effect with LED was Halloween Wall Sconce Fire Torch
  • how many episodes monster garage
  • how many episodes monster garage new season
  • how many episodes of new monster garage
  • how much to fix canon pixma printer error
  • how to add boom vang line
  • how to add boom vang rope
  • how to add topping lift daysailer
  • how to add uphaul rope to sailboat
  • how to build Intel Alder Lake Core i9-12900k Gaming PC
  • how to clean canon pixma black ink absorber pad
  • how to clean canon pixma ip8700 series printer error
  • how to cool down amd radeon 460
  • how to cool down amd radeon 6800
  • how to cool down amd radeon gpu
  • how to cool down amd radeon RX 480
  • how to cool down amd radeon RX 570
  • how to cool down computer
  • how to cool down desktop computer
  • how to cool down my gpu
  • how to cool down my pc
  • how to cool my computer
  • how to cool my cpu temperature
  • how to cool my GPU
  • how to cool my pc
  • how to cool up my computer
  • how to fix canon pixma printer error 6A81
  • how to get monster garage reboot
  • how to install solar light on garage
  • how to install solar light on house
  • how to install solar powered sensor light
  • how to install This Outdoor Bright JACKYLED Adjustable Solar Security Spotlight with 4400mAh Large Battery Capacity Waterproof Wireless Flood Light for Garden Porch
  • How to install threaded inserts in turntable base
  • how to keep your computer cool
  • How to make a 3D print smooth
  • how to make a topping lift
  • how to market indie game
  • how to market indie game cheap
  • how to market your game
  • how to mount solar light
  • How To PC Case Front Bezel Grill Mod
  • how to promote new indie game
  • how to promote your new PC game
  • how to replace old turntable feet
  • how to replace pioneer turntable feet
  • how to replace topping lift
  • how to replace turntable feet pioneer
  • how to screenshotsaturday
  • how to smooth 3d print
  • how to smooth 3d surface
  • How To Smooth PLA Prints
  • how to use and install jackyled solar power light
  • how to watch monster garage reboot free
  • how to wire bulgin push button
  • how to wire bulgin vandal resistant switch push button
  • how to wire bulgin vandal resistant switch push button MPI001
  • how to wire LED bulgin push button
  • hyte Y40 gallery
  • hyte Y40 gpu size
  • hyte Y40 motherboard size
  • hyte Y40 radiator size
  • hyte Y60 case gallery
  • hyte Y60 radiator size
  • Install 8.8 LCD in Gaming PC Build
  • install new turntable dampening feet
  • install security light outdoors
  • installing a topping lift
  • installing a topping lift cons
  • installing a topping lift flying scot
  • installing a topping lift Lockley
  • installing a topping lift Lockley surprise
  • installing a topping lift newport
  • installing a topping lift o-day
  • installing a topping lift potter
  • installing a topping lift pros
  • is alignable a scam?
  • is alignable real service?
  • Is bluehost hosting safe?
  • is hostgator business VPS plan safe and good
  • is hostgator dedicated IP safe?
  • is hostgator safe?
  • is hostgator VPS safe?
  • jackyled best solar lights outdoor lighting
  • jesse james hellfire sailboat
  • jesse james sailboat
  • jesse james shotgun whiskey car
  • kitchen cutting board for turntable
  • LED for realistic fire effect for halloween haunted house
  • Lian Li 011 Dynamic Mini Dimensions
  • Lian Li 011 Dynamic Mini GPU length
  • Lian Li 011 Dynamic Mini News
  • Lian Li 011 Dynamic Mini Price
  • Lian Li 011 Dynamic Mini Radiator Size
  • Lian Li 011 Dynamic Mini Release Date
  • Lian Li 011 Dynamic Mini Vertical GPU
  • lockley newport 17 review
  • Lockley Newport Boats Instructions Manual download
  • Lockley Newport Boats Manual download
  • Lockley Newport Boats Surprise
  • lockley sailboat buyer guide
  • Lockley Sailboat Instructions
  • machined aluminum small form factor PC case
  • Make 3d printed parts smooth
  • make 3d prints smooth
  • market china PC game
  • market indie game on steam
  • market indie game wishlist
  • Market my indie game tips
  • minneapolis businesses closing virus
  • Minneapolis gaming pc builder and modder
  • Minneapolis PC builder
  • mnpctech monster garage series episode guide
  • mnpctech on twitch intel
  • Mnpctech PC Case Mod
  • Mnpctech replace turntable isolation feet review
  • mnpctech works with china game publisher
  • modded gaming pc websites
  • modding pc store
  • Modern Masters Iron Paint Substitute
  • monster garage hogbear
  • monster garage sailboat
  • monster garage streaming new season
  • Mortal Shell Game PC case Mod
  • Mortal Shell Game PC Giveaway
  • Mortal Shell Game Release Date
  • Mortal Shell game releases on August 18th
  • Mortal Shell Game Review
  • Mortal Shell Game Tips
  • Mortal Shell Game Walk Through
  • Mortal Shell Game Walk Thru
  • Mortal Shell Gaming PC Giveaway
  • MPI001 how to wire bulgin switch
  • my blue host site got hacked
  • my computer is slow
  • my computer won't cool down
  • my gpu is running hot
  • my hist gator site got hacked
  • my turntable needle is skipping
  • need lockley newport 17 parts
  • Network ethernet card for USI Fiber Optic
  • new amazon scam
  • new monster garage episodes delorean
  • new monster garage S2021 episode guide pics photos
  • new monster garage season reboot cars
  • newport 17 or compac 17
  • newport 17 or montgomery 17
  • newport 17 or siren 17
  • newport 17 sailboat buyer guide
  • Order Lian Li 011 Dynamic Mini
  • outer worlds game pc case mod
  • outer worlds pc case mod
  • outer worlds theme gaming pc build
  • pc case mods for sale
  • PC gaming covid-19 minnesota quarantine
  • pc mod parts
  • performance pcs lian li
  • PLA Smoothing process
  • play computer games during covid-19 minnesota quarantine
  • Price USI Internet Fiber Optic
  • promote china PC game
  • promote PC game from poland
  • promote PC game from russia
  • protect your host gator site store
  • quick way to smooth 3d prints
  • Rae Ripple monster garage
  • record player humming
  • Repair Fix Universal Laser C-200 LaserKiosk UL-25 Watt Manual
  • repair Metal Effects Oxidizing Iron Paint
  • repair snark hull
  • Replace Fix Universal Laser C-200 Laser Kiosk Tube
  • replace pioneer turntable feet
  • replace rotted rubber turntable feet
  • replace rotten pioneer turntable feet
  • replace turntable feet isolators
  • replacement guide turntable feet
  • retro computer ATX tower with turbo button
  • retro futurism
  • Retro Gaming PC Build Gallery
  • retro gaming PC computer case mod
  • retro PC gaming room
  • Review Monster garage reboot
  • review of new monster garage
  • review sailcrafters in minneapolis
  • RTX 3080 Ti Gaming PC Build
  • RTX gpu rip-off scam
  • rules for 2021 Intel PC Case Mod Level-Up Challenge & Giveaway
  • sailcrafters in minneapolis
  • sailcrafters in minnesota
  • sailcrafters in st louis park review
  • scam amazon email
  • screen for AIDA64
  • Screw Size For Buy Goldring Lenco 88 Turntable Feet
  • See Rust-Oleum 314560A2 Universal All Satin Bronze Paint
  • sensor light looks like security camera
  • Servers.com gaming PC by Mnpctech
  • share indie game
  • shop and buy turntable isolation dampening feet
  • shop for best turntable isolation feet
  • Shop Goldring Lenco 88 Turntable Feet
  • Siri find solution for cooling my PC
  • Smooth 3d model surface
  • smooth 3d print guide
  • smooth 3d printing
  • smoothing 3d printed models
  • snark sailboat repair
  • snelling upper flats housing
  • solar led light for back door
  • solar led light for driveaway
  • solar led light for enter door
  • solar led light for front door
  • solar led light for garden
  • solar led light for indoor
  • solar light looks like camera
  • solar light looks like security camera
  • Stainless Steel Illuminated Vandal Resistant Push Button Switches
  • steampunk steamer chest
  • steampunk travel chest
  • stop alignable spam emails
  • stop turntable hum
  • stop turntable humming
  • System game stat LCD screen for Bitfenix PC case
  • System game stat LCD screen for Cooler master PC case
  • System game stat LCD screen for NZXT PC case
  • System game stat LCD screen for Thermaltake PC case
  • take apart clean corsair xc7
  • take apart clean corsair XD3
  • things to do during covid-19 corona quarantine
  • topping lift line size
  • topping lift vs boom vang
  • trailer sailor models
  • trust amazon warehouse?
  • turbify buys yahoo small business
  • turbify change password email
  • turbify legit?
  • turbify yahoo change password email
  • Turbify yahoo Small Business Email
  • Turbity is now Yahoo Small Business Log in
  • two part epoxy snark sailboat
  • upper flats apartments size
  • upper flats snelling apartment rent
  • Upper Post Flats
  • Upper Post Flats Garage Size
  • Upper Post Flats Price
  • Upper Post Flats Rent
  • US Internet Fiber Optic Installation Price
  • US Internet Gig Experience
  • USI Fiber Optic Installation Price
  • USI Fiber Optic ISP Review
  • USI Gig Experience
  • v8 gasifier corvette
  • vault 33 TV Show
  • Victorian steampunk theme PC mod
  • vintage computer case mod
  • vintage gaming PC build gallery
  • vintage pioneer replacement guide
  • vinyl records
  • watch 200 mph dodge rampage new monster garage
  • watch fallout series online free
  • water cool corsair 5000
  • weathered and distressed airbrush guide
  • what is decopunk art
  • what to do during covid-19 minnesota quarantine
  • what works with Modern Masters Rust Paint
  • where to buy Lian Li 011 Dynamic Mini De Bauer
  • where to buy Buy DDR5 38400
  • where to buy Buy INTEL Alchemist ARC GPU
  • where to enter 2021 Intel PC Case Mod Level-Up Contest
  • where to fix canon pixma ip printer error
  • where to post indie game
  • where to pre-order lian li 011D Mini
  • where to share indie game
  • which epoxy for snark sailboat
  • which epoxy for snark sailboat hull
  • which Intel Alder Lake Core i9-12900k
  • wire MP1005 bulgin vandal resistant switch push button
  • works with japan game publisher
  • Yahoo Small Business Email Changed Turbify
  • Choosing a selection results in a full page refresh.
  • Press the space key then arrow keys to make a selection.
  • Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
  • Seacycle 
  • Spring Creek



Popular Options

Sunflower on the Bay Video       

Sunflower in European Harbor  Video 

Sail and hull colors may vary from those depicted in photographs.  All equipment, specifications and materials may change without prior notice.

Click Here for Parts For Sunflower 3.3

Click Here for Rigging Instructions For Sunflower 3.3

Sailboat Owners Forums

  • Forums New posts Unanswered threads Register Top Posts Email
  • What's new New posts New Posts (legacy) Latest activity New media
  • Media New media New comments
  • Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
  • Classifieds Sell Your Boat Used Gear for Sale
  • Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
  • Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

help with snark sailboat

  • Thread starter [email protected]
  • Start date Jul 24, 2002
  • Brand-Specific Forums
  • Other Sailboats

[email protected]

We purchased an old snark sailboat at a yard sail in need of some TLC. We are trying to find out how to repair the hull. It has a styrofoam base covered with a plastic like material that has started to crack into pieces. Does anyone know how to repair or what we could put over the hull to save this old boat. We are knew to sailing and want to try to fix this before we invest in upgrading to a newer boat. Thanks for any help anyone can give us. [email protected]  

If it's foam cored fiberglass..... I do not know about the Snark, but if it'sold, I doubt that it is molded plstic like the the Walker Bay dinghies. Probably fiberglass and you may have stress cracks that are pretty easy to fill. In fact with small boat you could do the repair and regelcoat the entire boat (easier and cheaper than two-part paint). Alternatively open and fill the cracks with a two-part repair resin like Marintex, then degrease and sand the whole hull and apply a good two part urethane like Interlux. If you look above your posting to Fiberglass Trilogy II it deals with cosmetic gelcoat repairs, what you need and how to color match etc. Hope this is of some help. Anyone out there who knows more about this particular boat? Thanks ALW  

warren feldstein

No idea how to fix it but I had one 25 - 30 years ago. It was a styrafoam boat with a plastic yellow coating. I think it was called corelight? If you can figure out who manufactured it, perhaps they can help. Is there any documentation or a capacity plate. It might have been AMF. Good luck, Warren Feldstein  

Snarks are made by CastleCraft I have a Snark Sunchaser II. Its a great little sloop-rigged cartopper that is extremely easy to sail. The hull is not fiberglass - its a material that CastleCraft (the maker) calls ABS polymer, which CastleCraft says is similar to lexan or royalex. CastleCraft can be reached at 1-888-274-8490 or www.castlecraft.com. They should have tips on how to fix cracks. Good Luck! P.S. Backyard Boats in Woodbridge, Va. sells Snarks, so they may have repair info also.  

I sailed an old Snark I sailed an old Snark Mayflower for years. The core is dense styrofoam covered by ABS plastic. I never found a specific repair but have used Marine Tex on some areas like the bow chine and Silicon based caulk in places that needed more flex. Larger areas may need a plate (e.g. plywood or sheet metal) bolted to a backing plate on the other side of the hull. The good news is you can't go wrong. Mine was a great boat. You can't tear it up!! Have fun!  

Fond memories... I purchased a new Snark in 1969. In those days, the basic Snark model was a plain hunk of molded styrofoam, with no plastic or fiberglass coating. Just raw high-density styrofoam. Shortly after making the purchase, we moved from the State of Washington to New Jersy. We cartopped the Snark from one end of the country to the other. When it was a couple years old, it snapped into two pieces, laterally at the spot where the mast support hole is located. I cemented the two pieces together, using a contact cement designed for styrofoam. Then I covered the entire hull, inside and out, with fiberglass cloth and resin, in the manner we used to cover wooden boats. I set the boat on saw horses and did the job in the garage. I finished the effort by painting the fiberglass-coated hull with a two-part epoxy, bright red. If I have to say so myself, it was a beautiful job. It added a lot of stiffness to the boat, lessened the need to be super careful in avoiding dents and gouges in the raw styrofoam, improved sailing performance by giving the hull a much smoother surface, and greatly improved the appearance of the little boat. We sailed it for nearly four more years, then sold it to a neighbor when we moved back to the West. Perhaps a similar restoration would work on your boat: sand the hull thoroughly, then recover it with fiberglass cloth and resin, and give it a good coating of epoxy paint. I have fond memories of my old Snark. It was my first boat, and it taught me a lot about sailing techniques. Good luck, Dale  

No citrus cleaners on polystyrene Looked up the Castelcraft site. Very interesting.... I am looking into ways of fixing cracks in the ABS skin, there is one liquid viyl product that you can get from TAPplastics.com that might do the trick. However I understand that the older Snarks are made of polystyrene. I used to do lots of boat shows in N. California and one confusion was a stall selling a citrus cleaner. These are OK with water dilution, but the terpene based solvent is very unselective. So, pressed, when people pressed me as to why they shouldn't use Citrus stuff to vinyl, foam cored material etc and other stuff. I used to drop polystyrene peanuts into the undiluted citrus cleaners - they just dissolve. Same if you put such a cleaner in a polystyrene cup. It eats a hole in it. Therfore, if you get something on polystyrene and you want to clean it off, do NOT use terpentine or citrus products.! ALW  

  • This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

snark sailboat hull

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

  • Sailboat Guide

Mach II is a 13 ′ 10 ″ / 4.2 m monohull sailboat built by Snark Sailboats (Meyers Boat Co.) between 1976 and 1982.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

  • SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
  • D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

  • D: Displacement of the boat in pounds.
  • LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

  • D: Displacement of the boat in pounds
  • LOA: Length overall in feet
  • Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Embed this page on your own website by copying and pasting this code.

  • About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

snark sailboat hull

Snark's History

snark sailboat hull

Phone: 440-986-3366 Fax: 440-986-2072 Contact Us

Follow MolnarOutdoor.com on Facebook


  1. Snark Sailboat Review

    snark sailboat hull

  2. Snark Sailboat Review

    snark sailboat hull

  3. Super Snark Sailboat

    snark sailboat hull

  4. Sailboats To Go » Pictures of Snark Sailboats

    snark sailboat hull

  5. Snark Snark Sunflower 3.3 Sailboat (ASB194) Molnar Outdoor

    snark sailboat hull

  6. Super Sea Snark Sailing

    snark sailboat hull


  1. #boats

  2. snark sailboat Ovidiu Isfan

  3. Boats

  4. MultiSurf Quick Sailboat Hull

  5. @SeaArkBoats protege

  6. The Sailing of the Snark


  1. Snark Sailboats

    Snark Boats Snark is the world's largest Sailboat Manufacturer. Almost one half million Snarks have been built. More people have learned to sail on a Snark, than any other recreational sailboat. All Snark models are car-toppable. Snark's are unsinkable, the internal hull being completely filled with EPS foam leaving no voids.

  2. Snark sailboat

    The Snark is a line of lightweight sailboats, the most popular of which is the two-person, lateen-rigged sailboat Super Snark manufactured and marketed by Meyers Boat Company of Adrian, Michigan.The Snark was initially marketed by Snark Products, Inc. of Fort Lee, New Jersey and has been marketed with numerous slight variations, most prominently as the Sea Snark, Super Snark and Super Sea Snark.

  3. Sailboats To Go » Snark Sailboats: Super Snark, Sunflower, Sunchaser

    All our Snark boats feature ABS Armorclad TM polymer cladding on a lightweight styrofoam core. Unsinkable. Accomodates two people (310 lbs) and comes with all the riggings. Just throw it on your cartop and head for the water. Hull is 11 feet long, 3' 2" wide; whole boat weighs just 50 lbs. Sail area is 45 square feet. Hull only is 43 lbs. More ...


    Hull Speed: The maximum speed of a displacement hull (referring to a hull that travels through the water rather than on top of it, e.g. planing). HS = 1.34 x √LWL (in feet) Pounds per Inch Immersion: The weight required to sink the yacht one inch. Calculated by multiplying the LWL area by 5.333 for sea water or 5.2 for fresh water.

  5. Snark Sailboats

    - Began vacuum forming ABS plastic on hull in 1973 - Sea Witch introduced to the market in 1974 - 1974 through 1984 the names of the existing boats were changed: ... - Many variations of the Snark sailboat were introduced during the time it was located in Virginia Beach, Virginia. - Companies such as Sears and JC Penney sold Snark sailboats ...

  6. Snark Sailboats (Meyers Boat Co.)

    An abbreviated history of 'Snark type' boats in the US (from Meyers Boat Co. website): LOCKLEY - Boat business purchased from Siltronics of Oakmont, Pennsylvania in 1970 - Started out with one mold (Sea Devil / Sea Swinger) and hull covered with sprayed Eurethane - Began vacuum forming ABS plastic on hull in 1973 - Sea Witch introduced to the market in 1974 - 1974 through 1984 ...

  7. Sailboats To Go » Super Snark Sailboat

    The Super Snark Hull shown without any rigging. Whats Included. Complete sailboat including: Hull with mast socket and rudder mount. Mast, Sail, Boom, Spar, and ropes . Rudder, Tiller, and Rudder Pin. Daggerboard (like a centerboard or keel) All necessary hardware. Owners Manual (download copy) Snark Learn-to-Sail Instructions

  8. Sea Snark (Super Snark)

    The higher a boat's D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more. Formula. D/L = (D ÷ 2240) ÷ (0.01 x LWL)³ D: Displacement of the boat in pounds. LWL: Waterline length in feet

  9. CastleCraft Snark Sailboats FAQS

    Snark is the world's largest Sailboat Manufacturer. According to the 1998 Sailor's Sourcebook over 425,000 Snarks have been built. More people have learned to sail on a Snark, than any other recreational sailboat. All Snark models are car-toppable. Snark's are unsinkable, the internal hull being completely filled with EPS foam leaving no voids.

  10. Snark Sailboats

    Weight: 50 lbs. Centerline Length: 11' Beam: 3' 2" Depth-Transom Width-Transom Height-Persons : 2: Max. Capacity: 310 lbs. Max. Horsepower-Hull Thickness: ABS Armorclad

  11. CastleCraft Super Snark Sailboat

    Snark is the world's largest Sailboat Manufacturer. Almost one half million Snarks have been built. More people have learned to sail on a Snark, than any other recreational sailboat. All Snark models are car-toppable. Snark's are unsinkable, the internal hull being completely filled with EPS foam leaving no voids.

  12. Repair Tips for Snark Sailboats

    Repair Tips for Snark Sailboats. and. How to Make Your Own Parts. To Order Snark Sailboats Parts Call 1-800-247-6275 or 1-517-265-9821 between the hours of 8 AM to 4 PM Eastern Time Monday thru Friday. HULL REPAIRS : use two part epoxy cement for all repairs or reattaching rub rail. Obtain locally May use epoxy cement or automotive epoxy ...

  13. Super Snark Sailboat

    Super Snark Sailboat - Aft port view. I just bought this sailboat, an 11′ Super Snark. I've wanted to learn to sail for a few years—this seemed like the perfect sailboat with which to start. It is purportedly unsinkable and very stable. The ABS clad EPS foam hull certainly seems very durable and indeed, could not possibly sink even if ...

  14. CastleCraft Sunchaser Two Sailboats

    The Snark Sunchaser II Sailboat comes complete with Dacron main and jib sail, daggerboard, kick-up rudder and tiller, riggings and fittings. Mast and boom are aluminum. Wooden parts are marine varnished. The open cockpit design has bench seating for up to 4 adults. 2 forward built-in insulated compartments provide generous storage under the two ...

  15. CastleCraft Sea Skimmer Sailboat

    888-274-8490. Order. Sea Skimmer Sailboat. Top Value In The Small Sailboat Class. Snark Sailboats. World's Largest Sailboat Manufacturer. The Snark Sea Skimmer Sailboat provides plenty of speed with its sloop rig with 70 Square Feet of total sail. The shallow deck gives it the appearance of a large sailboard. CURRENTLY UNAVAILABLE.

  16. How To Guide On Snark Sailboat Hull Repair

    How to repair your Snark sailboat's styrofoam hull with ABS polymer shell in this do-it-yourself guide. Don't waste your time searching for the right epoxy for your Snark sailboat repair - btw, it's this Original Gorilla Glue that you mix with bits of styrofoam to repair your Snark hull. Don't waste your time trying to find out which 2-part epoxy to use. We found a faster and better solution ...

  17. CastleCraft Sunchaser One Sailboats

    Snark is the world's largest Sailboat Manufacturer. Almost one half million Snarks have been built. More people have learned to sail on a Snark, than any other recreational sailboat. All Snark models are car-toppable. Snarks are unsinkable, the internal hull being completely filled with EPS foam leaving no voids.

  18. CastleCraft Sunflower Sailboat

    The Sunflower 3.3 Sailboat is a full featured upgrade from the basic Super Snark . In additional to a larger (55 sf) sail, it has a heavier duty mast, boom, spar, and rigging. The Sunflower 3.3 Sailboat the hull is wider, higher and thicker than a Super Snark Model. Forward storage is provided under the splash deck not found on the Super Snark.

  19. help with snark sailboat

    I have a Snark Sunchaser II. Its a great little sloop-rigged cartopper that is extremely easy to sail. The hull is not fiberglass - its a material that CastleCraft (the maker) calls ABS polymer, which CastleCraft says is similar to lexan or royalex. CastleCraft can be reached at 1-888-274-8490 or www.castlecraft.com.

  20. Meyers Boat Company

    Welcome to the Meyers Boat Company website, the official home of Meyers boats, Michicraft and Sportspal canoes, Snark sailboats, Seacycle waterbikes, and Walden kayaks. Use the tabs on the top of the page to navigate the website, or alternatively click on the logos below to be taken to information of the respective brand:

  21. Mach II

    Mach II is a 13′ 10″ / 4.2 m monohull sailboat built by Snark Sailboats (Meyers Boat Co.) between 1976 and 1982. Great choice! Your favorites are temporarily saved for this session. ... This ratio assess how quickly and abruptly a boat's hull reacts to waves in a significant seaway, these being the elements of a boat's motion most ...

  22. Snark Snark Sunflower 3.3 Sailboat (ASB194) Molnar Outdoor

    Snark's are unsinkable, the internal hull being completely filled with EPS foam leaving no voids. The external hull and deck are formed out of rugged ABS polymer, which is vacuum formed over the core to give an extremely durable hull. Snark Sailboat Sunflower 3.3. Model #ASB194. Note additional shipping charges may apply.