offshore powerboat racing 2022 schedule

Powerboat P1 is the fastest growing marine motorsport series in the world and has a long term commitment to growing and developing the sport of power boating at all levels. The Powerboat P1 team works closely with the sport�s governing bodies, the UIM, APBA and the IJSBA. P1 has delivered more than 85 world championship events in over twelve different countries for more than a decade.

Cookie Policy

Contact info.

• Address: 2320 Clark Street, Suite A1 Apopka, FL 32703 United States
• Phone: +1 407 985 1938
• Email: [email protected]

Cocoa Beach

Fri 17 - Sun 19, May

Lake of the Ozarks

Thu 30, May - Sat 01, Jun

Fri 09 - Sun 11, Aug

Fri 13 - Sun 15, Sep

St. Petersburg

Fri 18 - Sun 20, Oct

222 Offshore Receive UIM Class 1 Trophy In Monaco

Alex pratt returns to class 1 with dfyoung, 222 offshore take class 1 world title, this year’s uim class 1 world championship showcased the sport at its absolute best, with 222 offshore’s darren nicholson and giovanni carpitella delivering a near faultless, season-long campaign to win the title and the sam griffith trophy, the most coveted prize in world powerboat racing., doug wright powerboats to race in uim class 1 next year.

• Fri May 17 ~ Sun May 19 2024

Latest Videos

• Use Next/Prev Buttons for more

Class 1 Teams

Class 1 2022 Results

Uim class 1 results.

• 2023 Season

Keep In Touch

Get invitations to exclusive Class 1 events, watch races for free! Also get the latest on this high-octane sport!

2023 Standings

• In the News
• Speed On The Water Videos
• Racing Reports
• Countdown To The 2024 Miami International Boat Show
• Coverage Of The 2023 Lake Of The Ozarks Shootout
• Coverage From The 2023 Key West Poker Run And Offshore World Championships
• Image of the Week
• Safe Boating
• New Products
• Featured Boat
• Latest Projects
• Year in Review Print Magazine
• Subscriber Login/Logout
• Subscribe to SOTW Magazine
• Buy Single Digital Mag Issues
• Magazine Archives
• Magazine Features
• Events Calendar
• Advertising Information
• Article Plaques
• Industry Partners

OPA Englewood Beach World Championship Essentials

The final offshore races of the 2022 season, the Offshore Powerboat Association Englewood Beach/Waterfest World Championships are on tap this weekend. An estimated 40 to 45 teams already are in town and more will be arriving throughout the day in the Southwest Florida waterfront community. OPA president Ed Smith said he’s expecting “50-ish” teams to compete, which is down from last year’s record-setting 69-boat total but understandable given the lodging challenges in the area left by Hurricane Ian.

There will be plenty of offshore racing action in Englewood Beach, Fla., this weekend. Photo by Pete Boden copyright Shoot 2 Thrill Pix .

Teams in the V-bottom classes will vie for Offshore Powerboat Association and Union Internationale Motonautique world titles based on their Saturday and Sunday results. In an intriguing wrinkle, Saturday’s race has been added to OPA’s own national championships and those champions will be crowned Saturday evening.

Bracket classes will comprise the majority of the fleet. As it usually does in Englewood Beach, the Bracket 700 class will have the largest group with 11 teams expected to compete this weekend.

On the spec-class side, LSB/Hurricane of Awesomeness team owner/driver Brit Lilly said he is expecting five Stock V teams including his own to show up, which would meet the minimum number of teams required for a UIM title. Super Stock-class representative Ryan Beckley said three Super Stock teams—his 32-foot CELSIUS Doug Wright catamaran not among them this year—are expected to compete in Englewood Beach this weekend.

Likewise, newly crowned UIM world champion Taylor Scism of TS Motorsports said she’s expecting three boats—her MTI 390XR included—to compete in the 450R Factory Stock class.

At least one Extreme-class boat, the 42-foot JBS Racing MTI catamaran piloted by Jeff Stevenson and Micheal Stancombe, also will be in the weekend mix.

Though it likely won’t have any competition, the JBS Racing catamaran will put on a show in Englewood Beach.

A race-by-race schedule has not been released as registration is still open, but competition is slated to run from 10 a.m. to 5 p.m. tomorrow and Sunday, according to the OPA website, on the four-mile, seven-turn course.

All of the action will be streamed live on the OPA Racing Facebook page . Speedonthewater.com contributing editor Eric Colby and chief photographer Pete Boden will cover all the action for the daily high-performance powerboating news site.

The Englewood Beach racecourse includes seven turns.

Related stories Englewood Beach Races To Pull Triple Duty For OPA Englewood Beach Waterfest Organizer’s Launch ‘Racing To Recovery’ Initiative Englewood Beach Races Moving Forward 2022 Key West Poker Run And Offshore World Championships Coverage

APBA Offshore National Championship Series Picture Bright Fo...

Opa englewood waterfest worlds schedule—full day of action a....

P1 Offshore;

Powerboat P1 is the fastest growing marine motorsport series in the world and has a long term commitment to growing and developing the sport of power boating at all levels. The Powerboat P1 team works closely with the sport’s governing bodies, the UIM, APBA and the IJSBA. P1 has delivered more than 85 world championship events in over twelve different countries for more than a decade.

Cookie Policy

Contact info.

• Address: 2320 Clark Street, Suite A1 Apopka, FL 32703 United States
• Phone: +1 407 985 1938
• Email: [email protected]

Cocoa Beach

Fri 17 - Sun 19, May

Lake of the Ozarks

Thu 30, May - 01, Jun

Fri 09 - Sun 11, Aug

Fri 13 - Sun 15, Sep

St. Petersburg

Fri 18 - Sun 20, Oct

• Cocoa Beach Location On Google Maps
• Cocoa Beach Web Site
• Melbourne International Airport Web Site for the P1 Offshore race at Cocoa Beach
• Melbourne International Airport Satellite View
• Weather for Cocoa Beach

Cocoa Beach, FL

• Race Schedule

Race Crews: Please log in to see the full race schedule here.

Click the button to download a PDF copy of the Cocoa Beach race Calendar Download PDF

Race Results

2023 results, p1 offshore %% teams.

Thunder on Cocoa Beach returns on May 17th 2024, and it is the 15th Anniversary of this very popular event. It is the second race of the APBA season. Expect wild Atlantic waves, creating some amazing photo opportunities as the boats catch a lot of air. We are looking forward to giving a big P1 welcome to racers, crews and racegoers to this event.

In addition to soaking up the vibe of a P1 race filled with excitement, action and speed, spectators can also take in the atmosphere of the East Coast’s surfing capital. Due to its warm weather, steady waves and world-class surf shops, Cocoa Beach welcomes around 2.5 million visitors each year, making it a top tourist destination. Once the racing is over, The Cover will be a popular destination, with Fish Lips Waterfront Bar & Grill on everyone’s list.

Thunder on Cocoa Beach Space Coast 2023 Entry List

Race Site location:

• 2024 BOAT BUYERS GUIDE
• Email Newsletters
• Boat of the Year
• 2024 Freshwater Boat and Gear Buyers Guide
• 2024 Boat Buyers Guide
• 2024 Water Sports Boat Buyers Guide
• 2023 Pontoon Boat Buyers Guide
• Cruising Boats
• Pontoon Boats
• Fishing Boats
• Personal Watercraft
• Water Sports
• Boat Walkthroughs
• What To Look For
• Best Marine Electronics & Technology
• Watersports Favorites Spring 2022
• Boating Lab
• Boating Safety

The Excitement of Running a P1 Offshore Race Boat

• By Charles Plueddeman
• November 16, 2023

In this age of 70 mph pontoons , 90 mph center-consoles and 150 mph sport cats, it’s pretty easy to experience eye-popping velocity on the water. So, there you are, the wind flapping your cheeks as you hold that throttle to the stop, one watering eye on the speedo as you bump the trim hoping to squeeze out the last bit of speed it will take to be the first boat to the poker-run card pickup. Maybe you even imagine that’s Reggie Fountain , Steve Curtis or Shaun Torrente at the helm of the boat you are pursuing, and instead of a king of hearts, there’s a big trophy waiting at the finish line. Well, dream on, Speed Racer. You’re going fast, but you are not racing, and your production-built motorboat is no race boat.

Steve Curtis throttles a real race boat. The Victory catamaran Huski Chocolate carried Curtis and drivers Travis Pastrana and Brit Lilly to the 2022 UIM Class 1 championship in the Powerboat P1 Offshore series. Last summer, we met Curtis and this boat, now rechristened Huski Ice Spritz, at the Mercury Racing Midwest Challenge in Sheboygan, Wisconsin, the fourth event on the five-race 2023 P1 schedule. The boat is owned by SVEA Racing Inc., based in Stuart, Florida, regarded as the benchmark in professionalism and experience in Class 1 and led by technical director Gary Stray, director of operations Scott Colton and crew chief Patrick Cleaveland.

Curtis, a 59-year-old Englishman and the son of Cougar Powerboats founder and racing catamaran innovator Clive Curtis, claimed his first Class 1 world championship in 1985 in Key West when he was 21 years old. In his career, Curtis has throttled more than 20 world champions. Who would be better to show us under the cowl of a Class 1 race boat than the acknowledged master of throttling racing cats?

Class 1 is the premier category of international offshore powerboat racing. A P1 Offshore event can include a number of classes, but only the Class 1 Championship is sanctioned by the UIM (Union Internationale Motonautique), the world governing body for all ­powerboating activities. Basic rules for Class 1 dictate a minimum boat length overall of 12 meters (about 39 feet) and a minimum weight of 5,400 kilograms (just over 11,900 pounds). There have been seven boats in the Class 1 field in 2023, ranging in length from the 43-foot Skater Monster Energy/MCON to the 51-foot Mystic dfYoung. The Huski Ice Spritz/SVEA Victory is 47 feet length overall, with a running surface of 41.5 feet, according to Curtis, and a 12-foot beam. Curtis explains that the bigger boats often have an advantage in rough conditions, but the smaller boats can be nimbler in a current on flatter water in a tight, multiturn closed course—the 5-mile course at Sheboygan had 10 turns.

“Courses have become smaller to make the event more spectator-­friendly,” Curtis says. “We used to run 40-mile laps and 200-mile races.”

The age of the Class 1 fleet is also surprising. Huski Ice Spritz/SVEA was built in 2007 by the Victory team in Dubai to a ­Michael Peters design.

“The boat has been rebuilt and repowered a number of times,” Curtis says. “I believe it was originally powered by Lamborghini V-12 engines. The boat has been crashed and repaired. The entire deck has been replaced, and the running surface adjusted as the engine package has changed.”

Carbon, Of Course

The overall theme of a race boat is that every element is functional, and this is the key difference between Huski Ice Spritz and your go-fast rig. Speed and safety are all that matter. The hull and deck are laid up with a combination of carbon fiber and Kevlar composite, with foam coring of various density. Bulkheads are carbon fiber, molded in a combination of triangulation and U-channel shape, and bonded within the hull. Each sponson has a pair of steps that are about 1.5 inches deep and a single strake. The tunnel between the sponsons is designed to trap and compress air, which lifts the boat at speed. The tunnel is about 33 inches deep at the bow but only 22 inches deep at the transom.

A V-hull boat could run in Class 1, but the catamaran offers a significant advantage, according to Randy Scism, who helped establish the Victory team as a force in offshore racing before returning to the United States in 1998 to start performance boatbuilder Marine Technologies Inc.

“A comparable V-hull boat will be 20 to 30 mph slower at top speed,” says Scism, who designed the 48-foot MTI Class 1 cat ­XInsurance/Good Boy ­Vodka. “In some conditions, it might corner better, but it could never make up the difference in total lap time. The air cushion under a cat can carry 30 to 35 percent of the boat’s weight, so the bottom is not even touching small waves and chop.”

Builders seek to produce a boat that is significantly below the class minimum-weight specification. This allows each team to make weight using lead ballast—water ballast is not allowed—that can be positioned right on the stringers to keep the center of gravity as low as possible to enhance handling and help trim the boat. Weight, either lead bars or bags of lead shot, can be placed aft to lift the bow in calm conditions or forward to hold the bow down in rough water. Fuel tanks are located directly on the boat’s center of balance so that balance does not change as fuel is consumed. At race venues, a crane fitted with a scale lifts the Class 1 boats from the trailer to the water; this way, each boat is weighed every time it goes in and comes out of the water to prevent cheating.

At Class 1 speeds, aerodynamics becomes critical. The boats literally fly over the water, and the deck is flush with the top of each sponson. The enclosed cockpit is a teardrop blister, hatch latches and cleats are carefully recessed and faired, and air intake is accomplished with low-drag NACA ducts. When conditions are ideal, these huge boats appear to levitate with a grace that belies the brutal thrust required to reach speeds that can exceed 160 mph on the open ocean.

Prescribed Power

There are no surprises below the engine hatches of a Class 1 boat. Since P1 led a revival of the class in 2019, the Mercury Racing 1100 Competition engine has been standard power, a spec engine for the class. The 9.0-liter V-8 engine features Mercury Racing QC4 quad-valve cylinder heads and is boosted by twin turbochargers. Power output is 1,100 hp and 1,100 lb.-ft. of torque per engine on 93-octane pump gasoline. Each big V-8 turns 6,000 to 6,500 rpm. The transmission is the stout model designed for the Mercury Racing 1750 engine with a stronger input shaft and ­internal components.

“Before the switch to the Merc 1100, we were running engines making 1,850 to 2,000 hp at 7,500 rpm,” Curtis says, “and top speeds pushed 190 mph. Those engines needed a rebuild after each race.”

The point of a specified engine for the class is to reduce cost and ensure power parity among teams with unequal resources. With that in mind, the engines are tightly controlled. Teams are not allowed to make any adjustments or modifications to the engines. With the exception of the valve covers, the engines are sealed with special fasteners. At the beginning of each race weekend, the Mercury Racing support team delivers propulsion control modules (PCM) to each team. The PCM units are painted bright ­yellow so they are easy to identify. ­Mercury ­Racing also installs a data logger on each engine.

“After every practice and ­every race, we download the data to make sure it makes sense and that nobody has tweaked on the engines and turned the power up,” says Steve Wynveen, Mercury Racing manager of development engineering. “The idea of Class 1 now is that winning is dependent on driving and boat setup, not on who has the most money to throw at an engine.”

The expectation is that if teams don’t abuse these engines by constantly banging into the rev limiter, each can last the season with just basic maintenance. Teams will put between two and three hours of run time on the engines at each race weekend. Teams are free to install their own PCM for testing between races.

The Huski Ice Spritz/SVEA team engineered a number of quick-disconnect fittings that allow it to remove an engine in about 20 minutes, according to Curtis. This team pulls its engines after each race for maintenance and inspects the bilge and engine mounts below the engines. Typical maintenance includes an oil and filter change, checking the valve lash and adjusting with shims, a compression and leak-down test, checking the turbocharger ­waste-gate adjustment, and ­torquing all fasteners and clamps.

Six of the boats in this Class 1 fleet use surface drives based on a BPM model to put power to the water. The Italian drive only articulates in the vertical plane, which provides a limited range of trim, generally less than 15 degrees or, according to Curtis, about 1.5 inches at the propeller. The prop is located about 58 inches abaft the transom. A drop box located on the exterior of the transom allows teams to quickly change gear ratios to best match engine torque to the prevailing conditions. Curtis explains that on today’s short courses, ­acceleration out of turns is often more important than top speed. Teams using a surface drive are limited to three prop sets but have unlimited gear ratios. Steering is accomplished by a center-mounted rudder—a knife-sharp polished stainless Italian Flexitab model on Huski Ice Spritz—and teams can change rudders based on water conditions.

A sterndrive is also permitted in Class 1, but if the sterndrive can steer, the boat is not allowed to use a rudder. The MTI XInsurance/Good Boy Vodka boat is rigged with modified Mercury Racing M6 sterndrives. Trim is retained, but the skegs are cut off and steering is locked. The boat is equipped with a rudder. Teams running sterndrives are allowed an unlimited number of propellers.

“The problem with trying to steer these boats with the sterndrives is that when you turn the drive, one prop is pushed into water and the other into the air coming through the tunnel,” Scism says. “The prop in the air loses thrust. You want to keep both props centered behind the sponsons. I prefer to use the M6 drives for the added trim authority. That drive is plenty rugged for these engines.”

Read Next: How to Boat Safely at Any Speed

Curtis throttles with his right hand gripping a pair of Mercury Zero Effort controls topped with red plastic knobs molded to the shape of his hand. To his left is a fixed, molded grip with radio/intercom control buttons, trim control, and a button to change the screen display. Curtis can communicate with his team using VHF and UHF radios, and a cellular connection. Below is a pair of Mercury ignition keys, which we were surprised to see.

“When we went to the standard Merc 1100 engines, we wanted to retain the entire stock wiring harness to prevent any sort of tampering,” Curtis says. “So, there are the keys, just like on your fishing boat. It was the ­easiest solution.”

Facing Curtis are a pair of Livorsi turbocharger boost gauges, a Livorsi trim indicator, and a multifunction display usually showing tachometers. In the center of the dash is a Garmin MFD split between navigation and a rearview camera. The driver sits before a quick-release steering wheel with a lap counter on top of the dash, which will also display a yellow-and-red flag signal from race control.

I wish I could describe the ­sensation of driving Huski Ice Spritz at speed while looking through the slit of a windscreen. But as it turns out, there is not enough liability coverage or legal cover to ever make that happen. Scism says MTI will build you a new 48 Race model to Class 1 specs, with a price tag of $2.2 million to $2.4 million with power. A $500,000 budget will cover a bare-bones Class 1 team for a season, Curtis says, with a well-financed team spending more than $1.5 million. SVEA Racing Inc. brings a crew of 10 to each race with a 70-foot race trailer, a tilting boat trailer and its Kenworth hauler, and a world-champion throttleman. They are not going to a poker run.

Safety First

When Steve Curtis won his first Class 1 championship, he was standing in an open cockpit. “There was very little concern for safety in those boats,” Curtis says. “If you stuffed the boat, it was very likely you’d be killed.”

Today the driver and throttle work in an enclosed cockpit that is all business. This is not your pleasure boat—there is no Alcantara upholstery, no bass-pumping audio system, and no LED-illuminated drink holders. Cockpit entry is through a hatch secured with four sliding bolts like a bank vault. In Huski Ice Spritz, Curtis throttles from the port seat, and the driver is at the wheel to starboard. Deep bucket seats have 2 inches of suspension travel, and the crew is strapped securely in place. “During a race, it can actually get rather violent in here,” Curtis says. “It’s not very noisy, but there is a lot of vibration, even in smooth water, because the boat is so rigid. We can feel pretty beat up after a race.”

A cage of carbon channels surrounds the cockpit, which Curtis says is backed by a very thick bulkhead. Crush zones around the cockpit are designed to absorb energy on impact. The interior is raw and black, with no thought of cosmetics. The forward portion of the cockpit structure is formed by a ¾-inch-thick polycarbonate shield modeled after a fighter-jet canopy. The clear portion is minimized for further crew protection. There’s an emergency escape hatch in the floor for egress if the boat flips. The driver and throttle have a 10-minute emergency air supply.

• More: Performance Boats

Six Boats Built for Adventure

Hyper Electric Marine’s Electric-Outboard Pontoon Boat

Modern Pontoons Are Built for a Variety of Boating Styles

Can a Unibody Truck Easily Tow a Boat?

Top Gear for Boating Adventures

38 Top Make-Ready Tips for the Spring Boating Season

Choosing the Right Buffer for Your Boat

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Cruising World
• Florida Travel + Life
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Many products featured on this site were editorially chosen. Boating may receive financial compensation for products purchased through this site.

Copyright © 2024 Boating. A Bonnier LLC Company . All rights reserved. Reproduction in whole or in part without permission is prohibited.

Victor Mukhin

• Scientific Program

Title : Active carbons as nanoporous materials for solving of environmental problems

However, up to now, the main carriers of catalytic additives have been mineral sorbents: silica gels, alumogels. This is obviously due to the fact that they consist of pure homogeneous components SiO2 and Al2O3, respectively. It is generally known that impurities, especially the ash elements, are catalytic poisons that reduce the effectiveness of the catalyst. Therefore, carbon sorbents with 5-15% by weight of ash elements in their composition are not used in the above mentioned technologies. However, in such an important field as a gas-mask technique, carbon sorbents (active carbons) are carriers of catalytic additives, providing effective protection of a person against any types of potent poisonous substances (PPS). In ESPE “JSC "Neorganika" there has been developed the technology of unique ashless spherical carbon carrier-catalysts by the method of liquid forming of furfural copolymers with subsequent gas-vapor activation, brand PAC. Active carbons PAC have 100% qualitative characteristics of the three main properties of carbon sorbents: strength - 100%, the proportion of sorbing pores in the pore space – 100%, purity - 100% (ash content is close to zero). A particularly outstanding feature of active PAC carbons is their uniquely high mechanical compressive strength of 740 ± 40 MPa, which is 3-7 times larger than that of  such materials as granite, quartzite, electric coal, and is comparable to the value for cast iron - 400-1000 MPa. This allows the PAC to operate under severe conditions in moving and fluidized beds.  Obviously, it is time to actively develop catalysts based on PAC sorbents for oil refining, petrochemicals, gas processing and various technologies of organic synthesis.

Victor M. Mukhin was born in 1946 in the town of Orsk, Russia. In 1970 he graduated the Technological Institute in Leningrad. Victor M. Mukhin was directed to work to the scientific-industrial organization "Neorganika" (Elektrostal, Moscow region) where he is working during 47 years, at present as the head of the laboratory of carbon sorbents.     Victor M. Mukhin defended a Ph. D. thesis and a doctoral thesis at the Mendeleev University of Chemical Technology of Russia (in 1979 and 1997 accordingly). Professor of Mendeleev University of Chemical Technology of Russia. Scientific interests: production, investigation and application of active carbons, technological and ecological carbon-adsorptive processes, environmental protection, production of ecologically clean food.   

Quick Links

• Conference Brochure
• Tentative Program

For the first time Rosatom Fuel Division supplied fresh nuclear fuel to the world’s only floating nuclear cogeneration plant in the Arctic

The fuel was supplied to the northernmost town of Russia along the Northern Sea Route.

The first in the history of the power plant refueling, that is, the replacement of spent nuclear fuel with fresh one, is planned to begin before 2024. The manufacturer of nuclear fuel for all Russian nuclear icebreakers, as well as the Akademik Lomonosov FNPP, is Machinery Manufacturing Plant, Joint-Stock Company (MSZ JSC), a company of Rosatom Fuel Company TVEL that is based in Elektrostal, Moscow Region.

The FNPP includes two KLT-40S reactors of the icebreaking type. Unlike convenient ground-based large reactors (that require partial replacement of fuel rods once every 12-18 months), in the case of these reactors, the refueling takes place once every few years and includes unloading of the entire reactor core and loading of fresh fuel into the reactor.

The cores of KLT-40 reactors of the Akademik Lomonosov floating power unit have a number of advantages compared to the reference ones: a cassette core was used for the first time in the history of the unit, which made it possible to increase the fuel energy resource to 3-3.5 years between refuelings, and also reduce the fuel component of the electricity cost by one and a half times. The FNPP operating experience formed the basis for the designs of reactors for nuclear icebreakers of the newest series 22220. Three such icebreakers have been launched by now.

For the first time the power units of the Akademik Lomonosov floating nuclear power plant were connected to the grid in December 2019, and put into commercial operation in May 2020. The supply of nuclear fuel from Elektrostal to Pevek and its loading into the second reactor is planned for 2024. The total power of the Akademik Lomonosov FNPP, supplied to the coastal grid of Pevek without thermal energy consumption on shore, is about 76 MW, being about 44 MW in the maximum thermal power supply mode. The FNPP generated 194 million kWh according to the results of 2023. The population of Pevek is just a little more than 4 thousand, while the FNPP has a potential for supplying electricity to a city with a population of up to 100 thousand people. After the FNPP commissioning two goals were achieved. These include first of all the replacement of the retiring capacities of the Bilibino NPP, which has been operating since 1974, as well as the Chaunskaya TPP, which has already been operating for more than 70 years. Secondly, energy is supplied to the main mining companies in western Chukotka in the Chaun-Bilibino energy hub a large ore and metal cluster, including gold mining companies and projects related to the development of the Baimsk ore zone. In September 2023, a 110 kilovolt power transmission line with a length of 490 kilometers was put into operation, connecting the towns of Pevek and Bilibino. The line increased the reliability of energy supply from the FNPP to both Bilibino consumers and mining companies, the largest of which is the Baimsky GOK. The comprehensive development of the Russian Arctic is a national strategic priority. To increase the NSR traffic is of paramount importance for accomplishment of the tasks set in the field of cargo shipping. This logistics corridor is being developed due regular freight voyages, construction of new nuclear-powered icebreakers and modernization of the relevant infrastructure. Rosatom companies are actively involved in this work. Rosatom Fuel Company TVEL (Rosatom Fuel Division) includes companies fabricating nuclear fuel, converting and enriching uranium, manufacturing gas centrifuges, conducting researches and producing designs. As the only nuclear fuel supplier to Russian NPPs, TVEL supplies fuel for a total of 75 power reactors in 15 countries, for research reactors in nine countries, as well as for propulsion reactors of the Russian nuclear fleet. Every sixth power reactor in the world runs on TVEL fuel. Rosatom Fuel Division is the world’s largest producer of enriched uranium and the leader on the global stable isotope market. The Fuel Division is actively developing new businesses in chemistry, metallurgy, energy storage technologies, 3D printing, digital products, and decommissioning of nuclear facilities. TVEL also includes Rosatom integrators for additive technologies and electricity storage systems. Rosenergoatom, Joint-Stock Company is part of Rosatom Electric Power Division and one of the largest companies in the industry acting as an operator of nuclear power plants. It includes, as its branches, 11 operating NPPs, including the FNPP, the Scientific and Technical Center for Emergency Operations at NPPs, Design and Engineering as well as Technological companies. In total, 37 power units with a total installed capacity of over 29.5 GW are in operation at 11 nuclear power plants in Russia. Machinery Manufacturing Plant, Joint-Stock Company (MSZ JSC, Elektrostal) is one of the world’s largest manufacturers of fuel for nuclear power plants. The company produces fuel assemblies for VVER-440, VVER-1000, RBMK-1000, BN-600,800, VK-50, EGP-6; powders and fuel pellets intended for supply to foreign customers. It also produces nuclear fuel for research reactors. The plant belongs to the TVEL Fuel Company of Rosatom.

Rosatom obtained a license for the first land-based SMR in Russia

On April 21, Rosenergoatom obtained a license issued by Rostekhnadzor to construct the Yakutsk land-based SMR in the Ust-Yansky District of the Republic of Sakha (Yakutia).

ROSATOM and FEDC agree to cooperate in the construction of Russia's first onshore SNPP

ROSATOM and FEDC have signed a cooperation agreement to build Russia's first onshore SNPP in Yakutia.

Rosatom develops nuclear fuel for modernized floating power units

Rosatom has completed the development of nuclear fuel for the RITM-200S small modular reactor designed for the upgraded floating power units.

Jewish Calendar 2022 Elektrostal’, Moscow Oblast, Russia

• Monthly calendar
• Candle-lighting times only

Advertisement

Calendar settings.

Select your calendar app:

• Outlook Web

Apple iOS & macOS

This subscription is a 4-year perpetual calendar feed with events for the current year (2024) plus 3 future years.

Step-by-step: iPhone / iPad or macOS

Use this download alternative if you prefer to manually import the calendar events and merge with your own calendar.

Outlook Windows PC Desktop

Internet Calendar Subscriptions are used by Windows PCs with Microsoft 365, Outlook 2021, Outlook 2019, and 2016.

Step-by-step: Outlook for Windows

Use this download alternative if you prefer to manually import the calendar events into Outlook and merge with your own calendar.

Google Calendar

Icalendar feed url.

The iCalendar (.ics) format is used by many calendar apps.

Outlook Web (Outlook.com)

Outlook.com calendars are used by Windows 10 & 11, Outlook Mac, and Microsoft email accounts such as Hotmail.com, MSN.com and Live.com

Comma Separated Values (CSV)

CSV is a legacy calendar file format for Outlook 97-2003. Select the file that matches your computer’s date format:

• Download CSV - USA mm/dd/yyyy
• Download CSV - Europe dd/mm/yyyy

Step-by-step: CSV for Outlook for Windows

Print PDF (formatted for 8.5"x11" paper)

Download PDF Calendar

Weekly Shabbat times email

Get candle-lighting times for Elektrostal’, Parashat ha-Shavua & Havdalah delivered to your inbox every Thursday.

Email Privacy Policy : We will never sell or give your email address to anyone. We will never use your email address to send you unsolicited offers.

Generating preview

This may take a few moments...