Spars, Rigging, and Hardware for Sailboats. Rig-Rite, Inc. Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149 ... Chainplate Covers are designed for use with Standard Chainplates made from rectangular bar or plate stock which protrude through the deck. Chainplate Covers fit over the Chainplate and are fastened to the deck to help protect ...
Chainplates 101: Inspect and Refit
For a ½-inch turnbuckle with a ½-inch toggle, the chainplate should be at least ⅜ inch thick. For a ⅝-inch turnbuckle and toggle, a minimum thickness of. ½ inch is necessary. Another matter worthy of consideration is the stainless-steel alloy the boat's chainplates are made of. Though 304 stainless is widely used, it's prone to ...
Know-how: Chainplate Replacement
Know-how: Chainplate Replacement. Jan 30, 2020. One of the new titanium chainplates in place—all that remains is the cleanup (left); It was a shame to have to cut into the Tayana's woodwork, but it had to be done (right). Everyone dreads the day that something as major and costly as a boat's rigging must be replaced.
Chain plate covers
Here is a pic showing chainplate covers - not my boat. The hole through the deck under the cover will be larger than the hole in the cover. Attachments. 1.jpg. 74.3 KB Views: 582. rardiH36. Jun 21, 2007 2,105 Hunter Cherubini 36_80-82 Sausalito / San Francisco Bay Apr 6, 2012 #15 ...
Servicing The Chain Plates
Servicing The Chain Plates. By The Rigging Company February 2, 2015February 6, 2015. The chainplate is typically a metal plate used to fasten a stay to the boat. One end of the chainplate has a hole for the pin of the turnbuckle, the remainder of the chainplate is used to attach the plate to the boat via a bulkhead, knee, tie rod or the hull ...
Re-Bedding Chainplate covers
BUTYL TAPE BED-IT 1/2" x 50' ROLL. Bed-It Butyl Tape, 1/16" thick, 1/2" wide x 50' roll. Gray. This tape is specifically formulated and extruded for the installation of deck fittings to the decks of boats. All aspects of the installation procedure and necessary formulation requirements have been brought together in a marine...
Re-bedding Chainplates (using Butyl Tape)
Once the shrouds were disconnected, he removed each chainplate cover and unbolted the chainplate (we did one chainplate at a time over the course of 3 days). He then got to work removing the actual chainplate. Let me tell you something, getting the chainplates out took some major muscling and several hours of hard work.
Chainplate Covers
Sailboat Hardware & Yacht Braid. Chainplates & Tangs. Chainplate Covers. Chainplate Covers. SKU: 13-02X. $2.41 - $24.26) UPC: Current Stock: Quantity. Increase Quantity of undefined Decrease Quantity of undefined. Add to Cart Adding to cart… The item has been added. Add to Wish List. Create New Wish List ...
Schaefer Chainplate Cover
Buy online Schaefer Sailboat Chainplate Cover at the best price. Technical support and the best customer service, sailing gear and parts at Vela Sailing Store. Free shipping. WE SHIP WORLDWIDE: More Info. Toggle menu. FREE SHIPPING* US Continental (min order $98) International (min order $750)
Schaefer Marine Chainplate Cover
Each. Chainplate Cover, Use with 84-80 and 84-90. 6 business days. SKU 10202. Mfg p/n 84-56. 4 in stock. $36.93. Each. Schaefer Marine Chainplate Cover.
Chainplates Revisited
To disperse the loads in the new boat from Santa Cruz Yachts, the chainplate will be solid bar stock through-bolted with 12, 1/2″ bolts to a longitudinal stringer that in turn is bonded to the hull and adjoining bulkhead in multiple layers of 0 to 45-degree and 0 to 90-degree fiberglass laid in varied orientations from deck level to the keel ...
chain plates
head sail gear; roller furling; main sail control; mast hardware; track; winches; eye straps and pad eyes; fairleads and bulls eyes; shackles; steering; anchor and docking; ... Schaefer Chainplate Cover fits 1" (25mm) x 1/8" (3mm) 84-69. Price: $34.69 Schaefer Chainplate Cover for 1 1/4" x 1/8" 84-54.
Standard Chainplates
Stainless Steel Chainplate Blank with 3/8" hole for attachment of Shroud. Chainplate Blank has no drilled holes for attachment to boat, and is designed for use in replacement applications where mounting bolt pattern varies, especially in older boats where Chainplates were hand drilled. Flat SS Chainplate is 10" long x 1 1/4" wide x 3/16" thick, 3/8" hole center is 3/4" from end.
Understanding Chainplates: The Backbone of a Sailboat
1. Supporting the Rigging: Chainplates are responsible for supporting and transferring the loads from the rigging to the hull of the sailboat. They are strategically placed and securely fastened to the bulkheads or hull, providing the necessary strength and stability to the overall rigging system. 2.
Chainplate Cover Upgrade (PR)C-34, C-36, C-38
Chainplate Cover Upgrade (PR) C-34, C-36, C-38. On occasion, the deck of your boat can be thicker than expected. In this case, the overall height of the spigot can interfere with the bottom to the turnbuckle toggle. If this is true it will be necessary to grind a small crescent at the top of the spigot to accommodate the turnbuckle toggle.
Chainplate sealing
Also mask off the top of the cover plate so that only 1/4 inch of plate is exposed around the area where the chainplate comes through. Mask off the chainplate so that only 1/4 is exposed above the final position of the plate. You are now ready to caulk: put a generous amount of caulking where needed.
Chain plate separating from deck
Next. It looks like the chainplate deck cover has been welded to the chainplate. My opinion, that is a weak design. Most plate covers slip over the chainplate. They serve to pull a sealant (i.e. butyl, or 4200 caulk down and around the chainplate to stop water intrusion. The flex of the deck and the welded chainplate cover did not play well ...
Chainplate sealing.
Apr 20, 2005. #8. gasket. Bob, it seems like a sensible idea you have,u000bI will be removing my chainplate covers foru000bre-sealing and you are onto a good idea. As long as the sealent will adhere to the rubberu000bmaterial,this should form a decent seal and yet provide removal of plate if needed.
IMAGES
VIDEO
COMMENTS
Spars, Rigging, and Hardware for Sailboats. Rig-Rite, Inc. Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149 ... Chainplate Covers are designed for use with Standard Chainplates made from rectangular bar or plate stock which protrude through the deck. Chainplate Covers fit over the Chainplate and are fastened to the deck to help protect ...
For a ½-inch turnbuckle with a ½-inch toggle, the chainplate should be at least ⅜ inch thick. For a ⅝-inch turnbuckle and toggle, a minimum thickness of. ½ inch is necessary. Another matter worthy of consideration is the stainless-steel alloy the boat's chainplates are made of. Though 304 stainless is widely used, it's prone to ...
Know-how: Chainplate Replacement. Jan 30, 2020. One of the new titanium chainplates in place—all that remains is the cleanup (left); It was a shame to have to cut into the Tayana's woodwork, but it had to be done (right). Everyone dreads the day that something as major and costly as a boat's rigging must be replaced.
Here is a pic showing chainplate covers - not my boat. The hole through the deck under the cover will be larger than the hole in the cover. Attachments. 1.jpg. 74.3 KB Views: 582. rardiH36. Jun 21, 2007 2,105 Hunter Cherubini 36_80-82 Sausalito / San Francisco Bay Apr 6, 2012 #15 ...
Servicing The Chain Plates. By The Rigging Company February 2, 2015February 6, 2015. The chainplate is typically a metal plate used to fasten a stay to the boat. One end of the chainplate has a hole for the pin of the turnbuckle, the remainder of the chainplate is used to attach the plate to the boat via a bulkhead, knee, tie rod or the hull ...
BUTYL TAPE BED-IT 1/2" x 50' ROLL. Bed-It Butyl Tape, 1/16" thick, 1/2" wide x 50' roll. Gray. This tape is specifically formulated and extruded for the installation of deck fittings to the decks of boats. All aspects of the installation procedure and necessary formulation requirements have been brought together in a marine...
Once the shrouds were disconnected, he removed each chainplate cover and unbolted the chainplate (we did one chainplate at a time over the course of 3 days). He then got to work removing the actual chainplate. Let me tell you something, getting the chainplates out took some major muscling and several hours of hard work.
Sailboat Hardware & Yacht Braid. Chainplates & Tangs. Chainplate Covers. Chainplate Covers. SKU: 13-02X. $2.41 - $24.26) UPC: Current Stock: Quantity. Increase Quantity of undefined Decrease Quantity of undefined. Add to Cart Adding to cart… The item has been added. Add to Wish List. Create New Wish List ...
Buy online Schaefer Sailboat Chainplate Cover at the best price. Technical support and the best customer service, sailing gear and parts at Vela Sailing Store. Free shipping. WE SHIP WORLDWIDE: More Info. Toggle menu. FREE SHIPPING* US Continental (min order $98) International (min order $750)
Each. Chainplate Cover, Use with 84-80 and 84-90. 6 business days. SKU 10202. Mfg p/n 84-56. 4 in stock. $36.93. Each. Schaefer Marine Chainplate Cover.
To disperse the loads in the new boat from Santa Cruz Yachts, the chainplate will be solid bar stock through-bolted with 12, 1/2″ bolts to a longitudinal stringer that in turn is bonded to the hull and adjoining bulkhead in multiple layers of 0 to 45-degree and 0 to 90-degree fiberglass laid in varied orientations from deck level to the keel ...
head sail gear; roller furling; main sail control; mast hardware; track; winches; eye straps and pad eyes; fairleads and bulls eyes; shackles; steering; anchor and docking; ... Schaefer Chainplate Cover fits 1" (25mm) x 1/8" (3mm) 84-69. Price: $34.69 Schaefer Chainplate Cover for 1 1/4" x 1/8" 84-54.
Stainless Steel Chainplate Blank with 3/8" hole for attachment of Shroud. Chainplate Blank has no drilled holes for attachment to boat, and is designed for use in replacement applications where mounting bolt pattern varies, especially in older boats where Chainplates were hand drilled. Flat SS Chainplate is 10" long x 1 1/4" wide x 3/16" thick, 3/8" hole center is 3/4" from end.
1. Supporting the Rigging: Chainplates are responsible for supporting and transferring the loads from the rigging to the hull of the sailboat. They are strategically placed and securely fastened to the bulkheads or hull, providing the necessary strength and stability to the overall rigging system. 2.
Chainplate Cover Upgrade (PR) C-34, C-36, C-38. On occasion, the deck of your boat can be thicker than expected. In this case, the overall height of the spigot can interfere with the bottom to the turnbuckle toggle. If this is true it will be necessary to grind a small crescent at the top of the spigot to accommodate the turnbuckle toggle.
Also mask off the top of the cover plate so that only 1/4 inch of plate is exposed around the area where the chainplate comes through. Mask off the chainplate so that only 1/4 is exposed above the final position of the plate. You are now ready to caulk: put a generous amount of caulking where needed.
Next. It looks like the chainplate deck cover has been welded to the chainplate. My opinion, that is a weak design. Most plate covers slip over the chainplate. They serve to pull a sealant (i.e. butyl, or 4200 caulk down and around the chainplate to stop water intrusion. The flex of the deck and the welded chainplate cover did not play well ...
Apr 20, 2005. #8. gasket. Bob, it seems like a sensible idea you have,u000bI will be removing my chainplate covers foru000bre-sealing and you are onto a good idea. As long as the sealent will adhere to the rubberu000bmaterial,this should form a decent seal and yet provide removal of plate if needed.